Correction of nails at home. How to make gel and varnish gel correction for beginners with video

The content of the article

• What is nail correction
• What is included in the correction of nails
• How many times can you make correction of extended nails
• Price for nail correction
• How to do correction of extended nails
• Gel Nail Extension
• Acrylic Nail Correction
• Shellac Nail Correction
• Nail correction on tips
• Gel Nail Correction – video

Girls very carefully monitor their appearance and well-groomed, beautiful nails – an important part of the image. In cosmetology, several options are used for procedures that will help in this matter, but each of them needs correction after 3-4 weeks. Depending on the material used, this procedure may be more complicated or simpler..

What is nail correction

In this case, the application of modeling material by an additional layer on the overgrown part of the nail plate is implied. Manicure correction also includes processing of the nail rollers, cuticles, the nails that have grown very much are cut off or trimmed, and a decorative design is applied. The frequency of corrective procedures depends on the rate of nail growth. As a rule, after building, they begin to grow faster, because the plate is protected from external negative factors..

What is included in the correction of nails

There are several options that have different prices. As a rule, the cost varies between 50-70% of the original, nail extension and correction in some cases are very similar in duration and amount of work. In many ways, the price depends on the condition of the nail plate, they make you an adjustment at home or in the salon, what material was used. The duration of the procedure (1-2 hours) depends on the same. What are the types:

1. Small. Correction on the surface of minor damage (scratches, chips, etc.).
2. Medium. It must be carried out 2-4 weeks after the last correction / build-up.
3. Complicated. It is carried out in case of breakage, exfoliation, mixing of most of the nail.

How many times can you make correction of extended nails

The period that you can wear such a manicure depends on how quickly the plates grow, how carefully you relate to the nails. As a rule, 1 recovery procedure is required in 3-4 weeks, but sometimes it is done every 14 days. Girls are often interested in how many times it is possible to do correction of extended nails. It depends on the material that was used during the procedure. For example, with gel extensions, you can make 4-5 adjustments. Then the gel spoils for natural reasons and should be replaced / just removed.

Price for nail correction

In Moscow there is a special catalog of masters where the rating is indicated, reviews are written about the work. This will help you find a trusted specialist, not a novice master who can ruin your manicure. The material used depends on how much the nail correction costs, whether you come to the salon yourself or the procedure will be carried out at home. The average price is in the range of 1,500 rubles, but can be found inexpensively for 1,300 rubles. or more expensive for 2000-2300.

How to do correction of extended nails

If you do not want to contact the master, and you are confident in your abilities, then you can restore the manicure yourself at home. You will definitely need to order or buy all the necessary materials, tools in the online store. Correction of nails at home is justified from a material point of view, if you conduct it regularly. The main advantages of this decision is that you can make corrections when you want to help your friends.

Those who are interested in how to make the correction of nails should first look at the lesson or read the step-by-step instructions with a photo so as not to spoil the manicure. In addition to modeling material, you will need to purchase a UV lamp. To simplify the process, you can buy a manicure device, the only negative is that they need to learn how to use, deal with sets of nozzles. A milling cutter is not necessary to buy the most powerful, a professional is definitely not needed. Its cost is relatively low, and you will use it for a long time.

Gel Nail Extension

This is one of the options for the material that is used for building and modeling. Correction of gel nails involves the use of specific materials that will have to be purchased independently. For the procedure you need to have:

• degreaser;
• gel;
• gel for modeling;
• liquid for removing the sticky layer;
• acid free primer;
• antiseptic;
• cuticle oil.

This is the most minimal set for the correction of gel extensions. If a single-phase gel was used for the first time, it can also be used for adjustment. In the case of a three-phase procedure, any system is suitable. Next, you need to have a minimal set of tools that will help you complete everything quickly and easily:

• lint-free napkins;
• buff for polishing nails;
• Ultraviolet lamp
• pusher or orange sticks;
• gel modeling brushes;
• gel files, suitable for 150/180 and 100/100 grit.
• nail clippers for cutting cuticles or blades;
• artificial nail clippers.

Below is a step-by-step method of adjusting nails on a gel basis. It is much like the procedure when working with acrylic. The instruction consists of the following steps:

1. Degrease, disinfect hands, tools, remove varnish, paints from the plate (it is better to take products without acetone).
2. Lift the cuticle with an orange stick.
3. Using a nail file, correct the shape, first cut off those parts of the gel that started to lag. Then, in the place where the old coating begins at the cuticle, remove the entire gel, you should get an imperceptible transition to a natural nail.
4. Treat the surface with a primer so that the infection does not get under the nail, remove excess with a towel.
5. A smooth part of the regrown plate is cut off with the help of a buff. Then immediately the hole is filled with gel, dried with a UV lamp.
6. When the material dries, you need to remove the sticky layer, form the correct shape. Correct any irregularities immediately with a file, if any. The base layer of the gel is applied evenly on all parts of the plate. A little more material is needed for the stress zone (just above the middle of the nail), but do not overdo it. Then dry the material again in the UV lamp..
7. Then you need to carry out a correction of the shape, align defects, bumps with a nail file. Make sure that the base layer is not accidentally erased before the old coating.
8. Remove dust regularly with a brush..
9. Before you finish, you need to make the desired design (drawing, jacket).
10. Next, apply the topcoat in one coat, dry under the lamp. Smooth then buff..
11. Nourishing oil needs to be treated with side rollers, cuticles (rubbed like cream).

Acrylic Nail Correction

This type of artificial material is very popular among girls. Correction of nails with acrylic is carried out according to a similar algorithm, as with the option described above. To make it work correctly, you can use the instructions described below:

1. Hands, work surface treated with a disinfectant.
2. Remove a varnish layer means without acetone.
3. Treat the cuticles with a softener. After 2 minutes, use a wooden stick / spatula to move the pterygium off the natural plate.
4. Remove the remnants of the applied product with a lint-free cloth. Cut off the free edge with a nail file, set the desired shape. Need to cut 2/3 of the thickness of the material.
5. Remove shine from a natural nail for better adhesion of the plate to acrylic.
6. Treat the exfoliated places with a file with a fine grain.
7. Next, you need to process the part where there is no acrylic with a degreasing agent.
8. Primer on the nail plate that connects the natural keratin to the artificial material..
9. Perform a simulation. Make sure that acrylic is evenly applied over the entire area, does not penetrate the skin or sinuses. The extension brush should only be made of natural pile, it is strongly impossible to press during application.
10. Then put your hands under the UV lamp for 2.5 minutes.
11. Apply special oil to the cuticle.

Shellac Nail Correction

This is a new type of coating that is easier to apply, lasts as long as gel / acrylic. Shellac nails are corrected in two ways: with or without complete removal. For the procedure, a standard set of tools is used. Correction of gel polish is carried out according to the following instructions:

1. Too dry nails should be treated with a special activator. it consists of essential oils and water, apply it on the sides and hold for 5 minutes.
2. Pusher pick up shellac varnish. Carefully remove the coating, making it easier with the same activator.
3. Give the overgrown edge the necessary shape with a nail file.
4. Next, do a manicure or using a special gel soften the cuticle, move it.
5. Strip the plate with a nail polisher, a gloss should appear. You can’t skip this step, then it will be easier to remove the layer if necessary.
6. Degrease the surface.
7. Coat the substance that replaces the base and finish, dry it under the lamp.
8. Choose a shade of shellac, apply in one layer to the surface, dry.
9. Then another layer, and again you need to dry.
10. Last apply the coated finish, dry.
11. Cover the cuticle with serum.

Nail correction on tips

This procedure in its algorithm is similar to working with gel extensions. Restoring the seal, updating the coating, replenishing modeling materials, giving aesthetics to the appearance – all this is the correction of nails on the tips. Below will be presented the algorithm of actions for acrylic technology:

1. Cut off overgrown tips with a reverse nozzle, process to a thin substrate.
2. Saw the surface of the nail with a 180 grit file, smooth the transition from the tips to your own plate.
3. Use a spatula to move the cuticle.
4. With a diamond nozzle, conduct a hardware manicure.
5. Degrease, disinfect the nails, wipe with a cloth (dry).
6. Apply a small amount of acid-free primer at the base of the tip.
7. Extend the nail bed with camouflage acrylic, shape using a brush.
8. Model the cuticle and apex growth area with a matte one-time powder.
9. Dale should compress the stress zone.
10. Clamp the clip.
11. Model white acrylic free edge of the nail. You can spread it on two tips at once.
12. Form the free edges of the base of a dense brush.
13. The nozzle “drum” (reverse) file the tip of the nail.
14. In the same way, process the inner, longitudinal arch.
15. Cut the area of ​​the cuticle, apex with a corn nozzle.
16. File 100 grit; file the nail plates.
17. Grind the internal arch of the nail with the reversing nozzle “corn”.
18. Tungsten carbide nozzle treat the zone of hyponychia (where the inner part of the nail is in contact with the skin).
19. Process the outer and side parts with a 100 grit file, remove dust.
20. Coat the inside of the loose tips with a gel without sticky salt..
21. Coat the outside with gel too.
22. Keep your hands under the UV lamp for 2 minutes.

Gel Nail Correction – video