How to develop a design project for an apartment or house

Recommendation points

• What is the basis of the design project
• Layout and finishing
• Furniture content
• Lighting
• Attributes
• The ingredients for a really good design project
• Layout
• Architecture
• Interior decoration
• Visualization
• Where to look for performers
• We continuously monitor the progress of work
• We accept a finished design project

In this article we will touch upon a very important issue of house or apartment renovation – how to develop an interior design project. You will receive clear recommendations on the preparation and drafting of a design project, learn how to choose performers and organize work with them as efficiently as possible.

As you know, it is difficult to find a friend’s taste and color. And when it comes to decorating your own home or place of work, the advice of strangers will only interfere. How, then, to combine all your own wishes regarding interior design, into a coherent and harmonious picture? The answer is simple: with the efforts of specialists, you can draw up a design project that will maximally reflect the customer’s own idea of ​​the appearance of the premises and will give detailed recommendations for achieving the goal.

What is the basis of the design project

Naturally, the more initial information you can provide to the designer, the more the finished result will meet expectations. Even the most experienced professional will find it difficult to understand the requirements for artwork, described, as they say, on the fingers. But samples of specific interior details will be very useful. Therefore, you should carefully prepare and form your own idea of ​​the visual purpose of the repair work. You can achieve the best result if you take maximum part in drawing up the design project, but for this you need to have a comprehensive picture of your dream interior yourself. Here are some tips on how to achieve this:

Layout and finishing

Carefully study the room in which the renovation will be carried out. Mark those areas that, in your opinion, are convenient enough to use and do not require alteration. You should focus not only on common sense, but also on intuition..

Those places that were rejected should be subjected to harsh criticism and a list of parameters that do not suit you.

Repeat the walk several times, over the course of two to three months, carefully recording changes in wishes and your own mood.

At the same time, study the places that you usually visit with special care. If you are visiting friends or in a cafe, restaurant, pay attention to the decoration of rooms, layout, all kinds of subtleties of decorative finishing.

Visit information Internet resources on construction and repair topics more often. Meet new products and fashion trends.

As a result, you need to draw up a dimensional plan for each floor, a diagram of doorways and arches, and also decide on preferences for the placement of utilities.

Furniture content

Visit furniture stores as often as possible. Do not hesitate to examine the furniture in detail: try to sit or lie on the sofa, open drawers and doors, study all kinds of design solutions.

Review catalogs, choose those stylistic directions that you like the most. In this case, it is better to save the most attractive illustrations..

There is an interesting way to determine the direction of research. Searching images in Google or Yandex for the query “Sofas”, “Tables” or “Bedroom sets” will acquaint you with the whole variety of furniture of a particular type.

If you tend to rely on your own imagination, you need to get a notebook and make sketches, sketches in it, or just draw the outlines of furniture details.

Lighting

First of all, decide on the level of illumination of the premises. The place for work or rest, meeting with friends or cooking should have an individual and comfortable lighting scheme.

Refer to online lighting catalogs. Fix your favorite options by saving links or images.

Start from the desired shade of light: if it is better to use filters of pastel or natural tones in the bedroom, then sterile white light will be indispensable for an office study.

Provide for the need for smooth control of light power where it is relevant.

Attributes

Realize that a room with quality finishes and good furniture looks “lifeless” without any decorative detailing. Therefore, it is better to think in advance about filling the room with vases, floor lamps, plants or photographs. It is such small and seemingly insignificant interior details that provide a truly comfortable and cozy atmosphere..

Make a list of things that are dear to you as a memory and will definitely be present in the room after renovation. Take high-quality photographs of these attributes to present to the designer later. These can be paintings, photographs, souvenirs from travel sites or expensive gifts for memorable dates..

When it comes to photographs, certificates of honor, or artwork, consider the type and style of frames that will enclose them..

Visit gift shops and online auctions. Think about what you would like to decorate the room in which you often visit. Think about the appearance of sockets and switches, taps, door handles and other little things.

When you are completely determined with your stylistic preferences, collect the results in a convenient information package and get ready to introduce the designer to it. Describe every detail in as much detail as possible. It may be that some of your ideas will not be possible to translate into an integral project image, so it is important for the designer to know why you liked this or that design solution..

The ingredients for a really good design project

The design project has a multi-layered structure, designed in several thematic sections. In good design studios, several professionals of different specializations are working on the project. If the project must be accompanied by technical justifications, then it starts with them..

Layout

If you need to change the layout to increase the usable space, the technical section has a number of important obligations:

• the decisions made in it must fully comply with the regulatory construction documents so that the construction and repair organization has the opportunity to carry out work according to the established rules;
• if this is a design project of a house under construction, only floor plans and sections of premises are indicated in it, and design decisions are made in the construction project;
• this section includes diagrams of utilities: electrical wiring and points of connection to it, plumbing, gas and heating equipment.

Architecture

This part of the project describes the design details for custom shapes and sizes. In apartments, these can be door arches, niches, ceilings, window slopes and other elements. When it comes to the exterior of the room, attention will be paid to the shape of the building, the roof, and the curly elements of the facade. In any case, this section is accompanied by sketch images, cross-sections of linear objects, dimensional diagrams of architectural formations. It is good if in this part of the project there are methodological recommendations for construction: schemes of profile frames for gypsum plasterboard structures, types of materials, building mixtures, etc..

Interior decoration

This part can be divided into two subsections. The first describes the decisions taken regarding the decorative finishing of walls and ceilings, floors, platbands, architecture. Many designers even indicate specific manufacturers of finishing coatings or doors, since they rely on their color cards..

The second subsection contains information about the interior content: furniture, attributes, household appliances, etc. It indicates both the layout of the interior detailing and images of its specific elements, supported by an external description and information using which this interior detail can be purchased.

Visualization

Perhaps the most interesting part of the project. It can be presented in the form of photographs, if the project has already been printed on paper, in which case the illustrations will be divided into thematic sections, and at the end of the project several photorealistic images of the object from different angles will be presented.

But most often the visualization section takes the form of a set of digital images of large size, high quality and high resolution. This view is most convenient for the customer: the picture can be greatly enlarged and the finished result can be viewed in all details.

The visualization of the project is the main and final part of it. Now the customer knows exactly what kind of object the object will have and can be completely sure that the finished result will exactly match the presented image..

Where to look for performers

Some parts of the project can be done independently. If a person has good taste, then the choice of a suitable color and type of finish, as well as their combination with the color of furniture, textiles and other details, will not be difficult for him. But there are those parts of the project, the compilation of which requires special knowledge and experience..

You can trust the design studio, which will perform the entire range of design and survey work. In this case, it is really possible to save a lot of time, since the customer is required to attend only the initial interview and several presentations. In addition, they can be held at a convenient time and even remotely via an Internet conference..

But in order to achieve the best result, the project must be assembled independently, while:

1. For technical solutions, it is better to contact a design and construction company specializing in repair and construction work of a specific type. Based on the requirements for redevelopment and architecture of the premises, experts will give clear recommendations for the construction work.
2. It is best to consult with artists or renovation designers for decorative finishes. They will tell you which coatings are better combined, how to draw up a color map and correctly distribute it among the zones of the room.
3. The choice of furniture and paraphernalia for the rooms should be carried out with the assistance of an interior specialist. A lot of useful information can be gleaned from communicating with a good furniture center consultant. Interior designers will also help.
4. It is better to entrust the calculation of lighting and utilities to a competent technician. This can be done at any suitable construction company.
5. For the compilation of images of the finished result, it is better to contact a freelance visualizer. He will need to provide a ready-made project, which will be fully recreated in a computer model with real dimensions and with real detailing. Therefore, in order to get a realistic and photorealistic picture, you need to specify in detail the types of coatings, colors, shades, textures, as well as images or links to products in online stores (sofas, chairs, chandeliers, household appliances, etc.).

We continuously monitor the progress of work

In any case, the work on the project requires careful control on the part of the customer. Even if you ordered a turnkey project in a design studio, during each interview or presentation, you need to pay attention to even the smallest details, give descriptions with maximum detail, accompany them with illustrative examples and achieve full satisfaction of your wishes with the finished result.

We accept a finished design project

Acceptance of a project is not always easy and must be done directly at the facility under repair or under construction. It is also important to use your imagination as much as possible to accurately represent the information presented in the project in real conditions.

You should start studying the finished project with the technical sections:

1. The layout is checked for compliance with the specified parameters.
2. A bypass of the room is done, gaps and openings are modeled, the location of partitions.
3. The layout of sockets and switches, plumbing fixtures is checked. The ease of use is assessed.
4. The form and dimensions of figured ceilings, niches, openings are presented. It is necessary to determine how they will look in natural and artificial lighting.
5. The project is being studied for compliance with the technical details of reality. The methods and places of fasteners, connections are checked, their reliability is assessed.

When the technical part of the project has been studied, attention should be paid to the final images of the project. If in any place there is a pronounced imbalance or inconsistency, you should stop at this point. Simply put, if at least one detail of the interior is not pleasant, it should be replaced or removed altogether. But if the finished result fully meets your expectations, which for so long remained only a cherished dream, it remains to check the functionality of the proposed furniture and household appliances. In the absence of objections, the finished project can be taken into the implementation stage.