Making your own furniture is not only useful, but also very exciting, especially if such an unconventional material as drywall is used for this. In the article we will tell you how to make a coffee table yourself from drywall scraps.
Recently, it has become fashionable to independently make furniture for your home. There is nothing surprising in this. Indeed, firstly, there is an opportunity to do just such a thing that will fit perfectly into the interior in design and dimensions, and secondly, do-it-yourself furniture fills the house with special comfort.
There are a lot of materials for the manufacture of furniture – wood, laminated chipboard, metal or plastic. In this article, we will tell you how to make furniture from such an unconventional material as drywall, using the example of making a coffee table..
Drywall as a material for furniture has a number of advantages over traditional materials:
- As a rule, after the repair there are scraps that cannot be used for any purpose. Almost the only option for their use would be the use for the manufacture of pieces of furniture..
- Drywall is easy to cut and handle. With it, you can make structures of complex geometric shapes. Therefore, the only limitation on what kind of furniture will be is your imagination..
- Drywall is easy to finish and decorate with almost any finishing materials, from paint to natural stone.
Naturally, drywall also has disadvantages, the main of which is the low surface strength. However, a reinforced frame and puttying with a reinforcing mesh solve this problem..
So, we will make a coffee table with a tabletop size of 60x60x7 cm and a leg height of 20 cm.Thus, the total height of the table will be 27 cm.
Tools and materials
To work you need the following tools:
- Drywall Cutter.
- Metal scissors or grinder for cutting metal profiles.
- Roulette and ruler.
- Screwdriver or screwdriver.
- Putty knife.
- Sandpaper.
- Brush.
And materials:
- Drywall scraps.
- Cuts of metal U-shaped profiles for plasterboard.
- Self-tapping screws with a press washer 14 mm long and oxidized self-tapping screws with a fine thread 25 mm long.
- Putty.
- Serpyanka mesh for gluing seams.
- PVA building glue for primer.
- Acrylic paint and varnish.
Making a coffee table
1. Cut off six pieces of metal profile, 60 cm each and eight pieces of 20 cm.
2. We connect blanks 60 cm long with self-tapping screws with a press washer in the form of a window frame, and then fasten the legs from short pieces of profile – 2 for each leg, turning them with their concave side towards each other so that they form a square in cross-section. Thus, the frame of the future coffee table will be made of drywall..
3. We close the work surface of the countertop with sheets of drywall. It can be in one piece, or it can be from several pieces, joining them on the frame guides. We leave 1 cm outlets on each side of the countertop. Cut the drywall with a clerical knife. To do this, mark the cut line, cut the top layer of paper along the ruler, fold it along the cut line and finally cut it with a knife from the inside of the fold. We fasten the sheets with oxidized self-tapping screws.
4. Cut off four strips 6 cm wide. They will go to the sides for the countertop.
5. We attach them to the frame.
6. For each leg, cut out four pieces of plasterboard and sheathe the legs with them from all sides.
7. The table is ready and waiting for finishing.
8. We glue the seams with a serpyanka, and then we putty. After the putty has dried, we grind it with sandpaper.
If you do not glue the seams with a serpentine, then over time all the seams will crack, the putty will begin to crumble and the appearance of the table will be spoiled.
9. Completely putty the table, trying to align all the corners. After drying, all irregularities are removed with sandpaper.
10. We prime the table before painting. It can be primed with PVA building glue, it will strengthen the layer of putty.
11. You can paint the table. Any acrylic paint is suitable for this..
12. To make the surface of the table more beautiful, you can decorate it, for example, make a stencil and use it to apply patterns on the table top.
13. We do it with paint similar in composition to the main.
14. To prevent the legs from scratching the floor, glue the scraps of the foam ceiling panels and cut off the bulging pieces at the edges..
15. The table is almost ready. To be washed, you need to cover it with acrylic varnish..
Any other piece of furniture can be made in the same way. The technology will be about the same.
Making a drywall coffee table
This post provides an inventive way to make a unique, contemporary drywall coffee table. The piece features an easy-to-install drawer system - complete with self-closing hinges and all the necessary materials - to create a sturdy, modern structure. A step-by-step guide accompanies the post, outlining simple instructions to construct and customize the piece. The result is a stylish, versatile coffee table with a unique texture and depth that is sure to become the focal point of any room.
Arrangement and comfort 
I’m curious about the process of making a drywall coffee table. How can drywall be transformed into a functional and sturdy piece of furniture? Is it a simple DIY project or requires specialized skills? Would it be suitable for everyday use or is it more for decorative purposes? Any tips or recommendations for someone considering attempting this project would be greatly appreciated!
Making a drywall coffee table involves several steps. First, construct a frame using sturdy materials such as wood or metal, ensuring it provides proper support. Then, attach drywall sheets to the frame, securing them with screws or adhesive. Apply joint compound to cover the seams and create a smooth surface, sanding it down for a polished finish. Painting or sealing the drywall will enhance its durability. While it may require basic DIY skills, working with drywall can be tricky, so some experience is recommended. A drywall coffee table can be functional, but it may not withstand heavy usage. It is more suitable for decorative purposes or light occasional use. Remember to take precautions to prevent moisture damage and consider adding a glass or acrylic top to protect the surface. Always prioritize safety and research specific techniques before starting the project.
Can someone provide guidance on how to make a drywall coffee table? What materials would be needed and what are the steps involved in constructing it? Are there any specific techniques or tips that would be helpful for a beginner in DIY furniture making? Thanks in advance for your help!
To make a drywall coffee table, you will need materials like drywall sheets, wood boards, screws, nails, sandpaper, paint or stain, and a saw. First, determine your desired dimensions for the table and cut the drywall sheets and wood boards accordingly. Assemble the frame using the wood boards and attach the drywall sheets to the top and sides. Secure everything with screws and nails. Sand the table to smooth out any rough edges and surfaces. Finally, paint or stain the table to your liking.
Some tips for beginners in DIY furniture making include measuring and cutting accurately, using the proper tools and materials, and taking your time to ensure the construction is done correctly. Don’t be afraid to ask for help or guidance from more experienced individuals, and always prioritize safety when working with tools and equipment. Good luck with your project!
How sturdy is a drywall coffee table? Can it withstand the weight of books, drinks, and other items without cracking or breaking? Are there any specific precautions or techniques to reinforce it for added durability?