...

How and what to process the ends of the rims of the log house

This post explains how to efficiently process the ends of the rims of the log house, in order to ensure structural durability and weather-resistance. It describes the necessary tools required and the details of the cutting and finishing process. With the careful selection of the lumber and use of sturdy materials, this method can provide a strong and reliable structure and a long-lasting, aesthetically pleasing finish. Advantages include minimal maintenance, excellent weather-resistance, and improved durability โ€“ all at a reasonable cost.

The protruding ends of the wreaths of the log house are a very noticeable and important element of the whole house. They need special protection, as they are prone to cracking, age faster and can become the target of pests. Our site will tell you how and with what you can process the ends of the crowns to protect them.

How and what to process the ends of the rims of the log house

As the portal already wrote, cracks in the logs of a log house appear for various reasons and it is possible and necessary to fight this phenomenon.

To understand why the ends need additional protection is simple โ€“ look at the logs that have been lying on the street for at least a year. It is the ends that are first of all covered with a fine mesh of cracks and change color to gray. This is due to the fact that the softest, inner part of the wood, usually safely hidden under the outer layers, turns out to be open on the cut.

Loose inner wood is vulnerable to temperature extremes, moisture, pests. In addition, moisture evaporates faster at the ends, the process of log shrinkage. If they are not treated, cracks will appear with a high degree of probability..

How and what to process the ends of the rims of the log house

It is necessary to process the ends of the rims of the log house immediately after the end of its construction. For this purpose, it is necessary to choose compositions that should not interfere with the release of moisture along the longitudinal and transverse wood fibers, but at the same time slow down this process so that the shrinkage is uniform.

Traditionally, immediately after the end of construction, the ends were treated with lime. This is a good antiseptic agent that is not afraid of ultraviolet radiation, very affordable. However, the lime will quickly be washed away by rains..

Experts advise using it only for the first two years, and after that process the ends with more reliable modern compounds.

Important! Experts are against processing crowns with such folk remedies as waste engine oil, PVA glue, candle wax, ordinary varnish. They either seriously impair moisture and air exchange at the site of application, or threaten the environment..

How and what to process the ends of the rims of the log house

We advise you to choose a special end face treatment. Today on the market you can find compositions with septic tanks and impregnants, both domestic and foreign. Popular formulations include BioTor, Remmers Induline, Senezh Tor, Bionic House, Neomid Tor Plus. The price is different. For example, for 2.5 liters of Neomid Tor Plus you will have to pay over 1000 rubles.

How and what to process the ends of the rims of the log house

In order to process the ends of a log house, you should choose a dry, warm day. You will need a stepladder to get to the upper crowns, brushes and the composition you have chosen. Before processing, the ends must be sanded. Of course, we are sure that you have already done the trimming directly, that is, the alignment of the crowns!

Grinding helps not only to achieve the most even surface, but also to get rid of stains, mold, remove wood that has already been damaged.

It is better to choose a wide, painting brush. The application of the composition is usually carried out in two stages โ€“ the second one 12 hours after the first, so that the protection is more reliable. Pay special attention to the edges of the ends, follow the instructions of the manufacturer of the selected composition.

Rate the article
( No ratings yet )
Recommender Great
Tips on any topic from experts
Comments: 1
  1. Gabriel Bennett

    Can you provide some guidance on how to effectively process and finish the ends of the rims in a log house? Iโ€™m curious about the best methods and tools to achieve a clean and professional look. Any advice on techniques or materials would be greatly appreciated!

    Reply
Add comments