During the construction of the pool, all the owners dream that the water in it will be the purest, transparent, beautiful blue color, as in the photo. Moreover, the water will remain so throughout the warm season – from May to September. It was not there!
If you do not take care of your artificial reservoir, the water in it will soon become less attractive in appearance. Green water, debris, sediment, turbidity, characteristic swamp odor, foam on the surface – these are the main signs that the pool has not been looked after for a long time.
We hope you have not neglected our advice and have properly prepared your pool for the summer season. Such general cleaning of artificial reservoirs is simply necessary. However, this is clearly not enough to keep the water in the pool in good condition throughout the entire swimming season..
Let’s get it straight with inflatable pools. They are usually small and much easier to deal with water pollution. Once a week, at least, the water is completely drained, while the pool does not need to be blown off at all. It is washed from a hose under strong pressure using non-abrasive detergents; the simplest formulations are suitable, for example, for washing dishes or an acrylic bath. Detergents must be washed thoroughly. After that, clean drinking water is recruited. It’s simple.
It is more difficult with larger stationary, including frame pools. First, we strongly advise you to buy all the equipment you need. To keep the water clean, the most important device will be a filter. For relatively small pools, it is better to purchase a cartridge one, for large ones – a sand one. It is thanks to the filters and the pump that the water circulates through the pipes, leaving them purified.
Just a filter, we warn you, is not enough to ensure the crystal-clear and safe water in the pool. There are three main methods for cleaning it:
- Electrophysical. A very effective and safe way, but it requires special, very expensive equipment. The electrophysical methods of water purification in the pool include ionization, ozonation and ultraviolet irradiation. It is impractical to buy equipment for carrying out these procedures in a relatively small summer cottage pool. It is better to use the service of electrophysical purification of water in the pool, by paying companies specialized in this;
- Mechanical. This method allows you to get rid of all the debris that was in the water, as well as sediment on the bottom. Special vacuum cleaners are used – automatic, semi-automatic, manual. As well as nets for catching debris floating on the water, brushes for cleaning the bottom and walls, telescopic hoses. The mechanical cleaning method is simple, you can do everything yourself, but it does not change the composition of the water, does not neutralize bacteria and microorganisms;
- Chemical. This is where various reagents and chemicals come into play, designed to destroy harmful microorganisms, to make water safe for humans. We described in detail how you can purify water using hydrogen peroxide, perhydrol. Algae helps to cope with algae, flocculants and coagulants help with water turbidity. Chlorine-based products are popular, which used to be an indispensable tool for keeping the pool clean and disinfecting. If no one in the family is allergic to chlorine, you can shock the pool once a week. For this purpose, granules or tablets containing chlorine with a high concentration are thrown into the water. They dissolve in water for about 12 hours, at which time you cannot swim. Therefore, it is better to carry out shock disinfection in the evening, be sure to turn on the water filter.
When using chemicals for water purification, it is necessary to strictly adhere to the manufacturer’s instructions and avoid exceeding their concentration.!
It is important to know what the indicators of the pool water are. For example, the level of free residual chlorine can range from 0.3 to 0.5 mg / l (for children’s pools – from 0.1 to 0.3 mg / l). And the pH level should be in the range of 7.2-7.6. To find out these indicators, special tests are used..
With regular maintenance, cleaning and disinfection, the pool water will always remain clear and safe for bathing. Do not run your artificial reservoir, pay enough attention to it so that it continues to delight the whole family and guests of the house during the summer.
What are some effective pool water treatment methods that you would recommend?
What are the most effective pool water treatment methods that ensure the water is safe, clean, and free from harmful bacteria or contaminants? I’m curious to know if there are any new innovations or techniques that have proved to be more efficient in maintaining the water quality in pools.
There are several effective pool water treatment methods to ensure the water is safe, clean, and free from harmful bacteria or contaminants. Some traditional methods include chlorine-based sanitizers, UV sterilizers, and saltwater systems.
In recent years, there have been innovations in pool water treatment technology. One such innovation is the use of ozone generators, which can effectively kill bacteria and viruses in pool water. Another emerging technique is the use of advanced oxidation processes, which involve the production of powerful oxidants to break down contaminants in the water.
Additionally, some pool owners are turning to mineral-based systems that use copper and silver ions to sanitize the water without the need for high levels of chlorine. These methods are considered more environmentally friendly and can provide a more pleasant swimming experience.
Overall, regular maintenance, proper filtration, and a combination of different treatment methods are essential for maintaining high water quality in pools. Keeping up with the latest innovations and techniques can help ensure that your pool water is safe, clean, and enjoyable for swimmers.