Traditionally, a backsplash is a strip of tiles between the bottom and top rows of kitchen cabinets. The standard height is 60 centimeters. It seems that everything is simple and logical. But there are kitchen aprons that don’t end with just such a stripe. Our advice site will show them to you.
This is what a typical kitchen apron looks like – everything is smooth, under the ruler, no height differences. It is clear that it is easier to calculate the number of tiles on such a surface, as the portal wrote about. Such a finish always has a beginning and an end, given by the dimensions of the kitchen cabinets and the long wall. However, kitchens do not always look so traditional..
Most often, the presence of a hood forces the owners to raise the height of the kitchen apron trim. This area must be protected from stains that are inevitable when cooking on the stove. And the tile is raised either to the level of the hood, or generally to the ceiling, revealing the entire surface behind the pipe leading to the ventilation. It all depends on which kitchen hood was chosen. Laying the tiles to the ceiling behind the hood is, of course, additional costs. But you can get an interesting decorative effect, highlight this area, for example, a panel or tiles of a different color and size.
One of the fashion trends today is the rejection of the upper row of cabinets in the kitchen. They are replaced with open shelves. And again, the owners in this case have two options:
- Economical. The tile on the kitchen backsplash reaches strictly to the first shelf.
- Practical. Tiles rise up behind shelves, protecting the wall from dirt.
In narrow kitchens, when the furniture runs in two rows, the apron does not have to be the same height. It is possible that there will be no upper cabinets on one of the walls either. Using the same tiles on opposite walls will unify the space, so sticking to the same height principle is optional.
Another good reason to abandon the traditional kitchen backsplash is the presence of a window in the kitchen. You can economically tile only a part of the working area up to the window sill, or you can extend the apron to the ceiling, framing the entire window with trim and running it on the slopes. Choosing, of course, to the owners, a lot depends on the repair budget.
A kitchen apron made of tiles may not have clear boundaries at all, in some places go to adjacent walls, a column, be uneven, going onto the upper part of the wall in the form of small inclusions … The choice of options is great and it is not necessary to stop at the traditional flat strip.