...

Do I need to glue linoleum: advice from the master

This post offers valuable advice from a master on whether or not to use glue while laying down linoleum. While gluing is not necessary, it has distinct advantages, such as being far less susceptible to rips and tears and providing a much more secure fit. On the other hand, using glue also makes the linoleum flooring more difficult to repair or replace in the future, so it should be used with caution. Taking into consideration the type of flooring, as well as the traffic it will receive and the environment in which it will be placed are all major factors in deciding whether or not to use glue.

Recommendation points



The article analyzes the methods of laying linoleum with practical advice. You will learn about the most popular misconceptions and mistakes regarding the flooring process, about the differences in the dry and glue method of linoleum. The pricing table will give information on the availability of different types of adhesives.

Do I need to glue linoleum? Stereotypes, misconceptions, expert advice

Linoleum has been the undisputed leader in flooring for the past forty years. The floors of apartments and country houses, corridors of hospitals and classrooms of schools are lined with this material. It is believed that anyone can lay linoleum on their own, since there is nothing complicated about it. Is this so, we will analyze in our article.

Stereotype No. 1. Linoleum can be laid anywhere and everywhere

PVC sheet material – linoleum, relin, marmoleum – has become a “lifesaver”, which they try to use in all cases.

Reality.The material is picky about the quality of the base. An unforgivable mistake would be laying it on a dirty surface or an unreliable base that exfoliates or crumbles. The material will respond to such negligence with coating defects within a year..

How to be?If the base is defective, for example, a floor with old paint, “dusty” or poor-quality screed, and there is no way to level it, it is better to abandon linoleum in favor of a laminate. Laminated fiberboard panels themselves serve as a leveling layer and “swallow” minor defects in the base.

Stereotype No. 2. Laying linoleum is quick

The people even have a kind of “term” designating this process: “throw linoleum.” The procedure is mentally simple – roll out, cut and press down with a plinth.

Reality.“Fast installation” and urgent installation of the skirting board are responsible for 80% of cases of bubbles, waves and wrinkles on the coating.

Do I need to glue linoleum? Stereotypes, misconceptions, expert advice

How to be?If you are dealing with a hurried craftsman who is trying to sell you his work, you are unlikely to learn from him that linoleum has to mature. This means that after laying and cutting it to size, you need to stand it for 5-7 days. During this time, PVC will take its stable shape, react to humidity and temperature changes. Only after that, the material will not change its linear dimensions and it can be fixed with a plinth and furniture.

Stereotype No. 3. “Dry” installation without glue – significant savings in time and money

It is logical that it takes time and effort to glue the material. But is it really important?

Reality.The process of applying and dispersing glue is quite simple and you can master it by reading the instructions. After a few square meters, you will find that it is not that difficult and difficult. The main advantage of glue flooring is that you can not withstand linoleum so that it lies down.

Do I need to glue linoleum? Stereotypes, misconceptions, expert advice

How to be?If you have the opportunity to stick linoleum – stick it! Laying through the glue strengthens the coating material and makes the whole cake much more resistant to mechanical damage. The most difficult thing here will be the rolling process – you will need a special device in the form of a board wrapped in rags.

Stereotype No. 4. Linoleum, laid without glue, easy to replace

You often hear: “I’ll get tired and take it off, put it in a new one”.

Reality.Floor repair is done every 10-15 years, and practice has shown that replacing the coating has nothing to do with the mood or the minute desire of the owner. The result is a situation where the customer all these years has an inadequate coating, which, moreover, wears out faster..

What to do?See Stereotype No. 3. In fact, after the declared service life of the glue (15–20 years), the glued linoleum is not so difficult to remove. Another thing is that you have to clean the base for the new material. In the arsenal of craftsmen there are special machines that clean linoleum – you can resort to their services.

Stereotype No. 5. Linoleum can be laid on a cement-sand screed

Reality.Yes, you can, only with the leveling mixture – it does not leave pores. And if you apply glue, it will stick well. But from a practical point of view, this is justified only if heating is provided with a “warm floor” system. In other cases, the screed is unpredictable. Since concrete and mortar do not hold heat well, the floor will cool uncontrollably, requiring additional carpeting..

Do I need to glue linoleum? Stereotypes, misconceptions, expert advice

What to do?Ideally – create an additional base layer – to secure the plywood or OSB sheets. These are tangible costs, but they pay off in the long run. The floor will not be cold, even if it is an outdoor vestibule.

A mistake is often made at this stage. On top of the screed, fiberboard 3-4 mm thick is sometimes laid “dry” in order to make the surface smooth and even. And then linoleum is glued to the fiberboard. This is the most undesirable combination of actions, because with changes in humidity, which will undoubtedly follow in the off-season, fiberboard will deform along with linoleum.

How to inexpensively prepare the base for linoleum

As you know, the cheapest layer material for leveling is fiberboard. Price for 1 sq. m – from 1.5 to 2 cu. e. It can be effectively applied in two ways. Each of them includes preparatory steps – dust removal, priming the base with glue and filling the joints with silicone sealant.

Method 1. By screed

Working process:

  1. Cut the sheets with the smooth part upwards over the area of ​​the room with a gap of 5 mm. Unfold and leave for 12-24 hours.
  2. Stick the sheets on the screed. Withstand 12 hours.
  3. Stick the linoleum on the sheets. Withstand 12 hours.

Thus, you will not only level, but also insulate the floor. For installation of fiberboard to the floor, ordinary construction glue is suitable. It is also suitable for flooring, but there are also special adhesives for this work. Consumption – about 0.5 kg per 1 sq. m at a thickness of 1 mm in one layer.

Method 2. On a wooden base

If the base has small defects – pits, shells, chips – you can save strength and use fiberboard as a wooden screed.

Working process:

  1. Remove bumps and steps from an old, solid base. Fill gaps with sealant.
  2. Cut the sheets with the smooth part upwards over the area of ​​the room with a gap of 5 mm. Unfold and leave for 12-24 hours.
  3. Apply glue liberally to each sheet separately and lay in the design position. Then from the center of the sheet to nail small (“boot”) nails 1×10, gradually pressing, fixing the sheet and dispersing excess glue. Allow 12 hours after styling.
  4. Fill joints with sealant.
  5. Cut linoleum and stick it according to the instructions from the video.

Video – how to stick linoleum

Both methods are suitable not only for any kind of PVC coating, but also for piece materials – laminate, parquet board, slab marmoleum, etc..

Table. Prices for construction adhesive for linoleum

Name Manufacturer Release form Unit price, cu e. Price for 1 kg, cu e.
Homakoll 248 Russia Bucket 10 kg 60 6
Bucket 14 kg 70 five
Kiilto UKI Finland Bucket 3 kg 21 7
Ceresit Thomsit K 112 (conductive) Germany Bucket 12 kg 90 7.5
KS Russia Bucket 18 kg 130 7.2
“Hercules” Russia 7 kg bucket 60 8.7
Kiilto PLUS Adhesive for linoleum and carpet Finland Bucket 15 kg 75 five
Bucket18 kg 85 4.7
PUFAS Bodenkleber 525 Germany 7 kg bucket 21 3

If we talk about the price of linoleum itself, then its spread is great. The price always depends on two parameters – quality and volume of the order. For example, IVC Greenline Berlin 506 linoleum 4 mm thick on a felt basis costs 12 cu at retail. e. for 1 sq. m. If you decide to purchase this linoleum in bulk – from 100 sq. m. m – it will cost you about 10 cu. e. for 1 sq. m. Savings on flooring – almost 20%. You can also save on other materials by purchasing them in bulk. This was made possible by the market economy and supplier competition..

The two whales that “hold” all the problems of home repairs are the pursuit of unhealthy savings and common delusions. Remember that timely professional advice will save your budget and nerves, and whether it is worth saving once more is up to you..

Rate the article
( No ratings yet )
Recommender Great
Tips on any topic from experts
Comments: 2
  1. Owen Kelly

    I’ve read your question about gluing linoleum and I understand you’re seeking advice from an expert. Depending on the type and size of linoleum, it may or may not require glue. To provide accurate guidance, could you please specify the specifics of your linoleum installation? Are you referring to a large area or just a small section? Providing more details will help me assist you better. Thank you!

    Reply
    1. Ava Foster

      I understand that you are looking for advice on gluing linoleum. The need for glue depends on the type and size of the linoleum. To give you accurate guidance, please provide more details of your linoleum installation. Specifically, let me know if it is a large area or a small section. This information will help me assist you better. Thank you!

      Reply
Add comments