Eco-veneer: differences from natural veneer, pros and cons

Due to the high cost of natural wood, veneer is used in the manufacture of a wide variety of furniture and doors. And not so long ago an eco-veneer appeared, which, despite its name, has practically no relation to natural wood. Our tips site will tell you about this interesting material.

Eco-veneer: differences from natural veneer, pros and cons

Let us recall that natural veneer is a very thin cut of wood, no more than a centimeter thick. The beauty, the texture of the wood is preserved, the layers are literally cut, cut out of the bars. Used to create natural veneers of maple, pine, walnut, cherry, oak, birch and other types of wood.

Eco-veneer has become a cheaper analogue of natural wood linen. For its production are used:

  • Nanoflex.
  • Pvc.
  • Polypropylene film.
  • Cellulose.
  • Wood fibers, but blended with synthetic additives.

Eco-veneer can be painted in any color, the palette is rich. Can successfully imitate natural wood.

Eco-veneer: differences from natural veneer, pros and cons

Why does the material created by artificial means have the prefix “eco”? Because eco-veneer is safe for humans, time-tested materials are used in its creation.

The scope of application of eco-veneer is the same as that of natural veneer:

  • A sheet of interior doors, the selection criteria of which the portal wrote in detail about.
  • Furniture fronts, including kitchen sets.
  • Wall panels, skirting boards.

Eco-veneer: differences from natural veneer, pros and cons

Most often, MDF and chipboard boards are covered with eco-veneer, sometimes it is used on decorative plywood.

The advantages of eco-veneer are as follows:

  1. Durability, it tolerates wear and external influences better than natural veneer.
  2. Not afraid of ultraviolet radiation.
  3. Available in a wide variety of colors, including imitation wood.
  4. Water resistance – in this regard, it is noticeably superior to natural veneer.
  5. Safe for humans.
  6. It costs less. And this is the main factor for many homeowners..

Eco-veneer: differences from natural veneer, pros and cons

However, the eco-veneer also has disadvantages:

  1. Unlike natural material, it cannot be restored. If the door leaf, covered with eco-veneer, is damaged, nothing can be done.
  2. Lower rates of sound and heat insulation.
  3. The difference with a natural cut of wood is still noticeable, it is of high quality, but “fake”.

Eco-veneer: differences from natural veneer, pros and cons

Eco-veneer can be very different, experts warn. There are the cheapest cellulose-based products, literally paper-based, fragile, short-lived. And there are coatings based on a thick polypropylene film, which are difficult to distinguish from natural veneer. Therefore, when choosing between natural and eco-veneer, this factor must also be taken into account..

Rate the article
( No ratings yet )
Add comments

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: