There are a lot of options for laying tiles on the floor: traditional, offset (like brickwork), offset, modules, herringbone and diagonally. On the last option for laying tiles on the floor, Our site of tips decided to stop to tell you about its features and give examples.
Why is it worth using diagonally laying tiles at all, why complicate the repair process for yourself, because it is more difficult, there are much more scraps, respectively, and the cost of material that costs money? Because diagonal tiling has undeniable advantages:
- Such a floor covering looks very original, beautiful, impressive, immediately attracts attention;
- Visually expands the room, “pushes” the walls “;
- Perfectly hides all the nervousness of the floor and opposite walls, which will definitely be visible in the case of classic styling.
First you need to prepare the base for the tiles: level the floor, perhaps using a self-leveling mixture, and then, when it hardens, prime it. Choose a high-quality tile, because the flooring will be subjected to serious stress. We choose the adhesive composition depending on the type of tile. Today, epoxy and polyurethane compounds are often used, elastic and easy to use..
Important! Do not forget that diagonal laying is exactly the case when tiles need to be taken with a margin! You will have a lot of scraps, so add at least 10% to the required amount..
From the tools you will need: notched spatulas for the adhesive, one ordinary small one for grouting (you will need it later), a container if you need to knead the glue (it is often sold ready-to-use), a tile cutter, a mallet, a level, rope, a marker and a ruler , spacers and crosses that fit between the tiles.
Important! Most often, square tiles are laid diagonally. They are easier to cut as needed than rectangular ones..
Before starting installation, you need to markup. Traditionally, all rows of tiles are placed at an angle of 45 degrees in relation to one of the walls. There are two options for starting the layout:
- From the corner. Draw a diagonal line from corner to corner of the room using chalk or a marker, as well as a rope or laser level. And we start with the first corner tile cut diagonally. This is the most important point, then the installation proceeds from this first tile, which should ideally lie in relation to the walls. Choose the corner that is most visible from the side of the door;
- From the center of the room. It is determined by drawing two lines from the corners, the intersection is indicated with chalk or a marker. This part of the room can be the most noticeable if it is not cluttered with furniture, so we start laying from here, using whole tiles turned at the right angle. It turns out that your tile will diverge in different directions and the need for trimming will appear only when you reach the walls.
Important! Diagonal laying can be done in any room. But most often this method is used in small rooms – on loggias and balconies, in bathrooms and toilets, as well as in corridors and hallways. As we wrote above, diagonal styling will visually expand these tight spaces..
The portal gave you diagonal layouts for laying laminate flooring. If you have rectangular tiles, you can use them well. If the tile is square, then when you cut you get triangles that should be laid with the hypotenuse down.
In general, the installation process itself does not differ from the usual one: the adhesive is applied with a notched trowel, the tile is put in place and pressed down with light blows from a mallet. Do not forget to check the evenness of the coating with a level and insert crosses between the tiles..
After the end of the work, you will have to grout the tile joints and clean. But with this you will definitely cope without problems.!
Can you provide some information on the advantages and disadvantages of laying tiles diagonally compared to other tile installation methods? Are there any specific patterns or designs that work well with diagonal tile placement? Could you also share some examples or images of spaces where diagonal tile installation has been used successfully? Thank you!
Can you please share some features and examples of laying tiles diagonally? I’m curious to know the benefits and drawbacks of this technique, and if it requires any special tools or expertise. It would be great to see some visual examples too!
Diagonally laying tiles can add visual interest and dimension to any space. It can create a unique and stylish look for floors, walls, or backsplashes. The main benefit is that diagonal tiles can make a room appear larger and more spacious. They can also offer a sense of continuity, as the eye naturally follows the diagonal lines.
However, there are some drawbacks to consider. Diagonal installation often requires more tiles due to the angled cuts, resulting in increased material waste and cost. It can also be more time-consuming and challenging, as precise measurements and cuts are necessary to maintain the desired pattern.
When it comes to tools, diagonal tile installation usually requires a tile cutter or wet saw to achieve accurate angled cuts. Knowledge of the proper techniques, such as using spacers and a level, is essential.
For visual examples, searching online or consulting tile showrooms can provide a range of stunning installations, illustrating the versatility and impact of diagonal tile layouts.