...

Possible problems of plastic windows and their solution

Plastic windows are a popular choice for many homes due to their appealing look and high insulation properties. But they can present some problems due to their materials, installation, and weaknesses. This post provides a comprehensive overview of the potential problems of plastic windows and offers practical solutions such as proper maintenance, caulk renewal, and adequate glazing. Selecting a reliable installation service and using quality materials can also help minimize potential problems and maximise the benefits associated with plastic windows.

Let’s talk about what problems may arise with recently installed plastic windows. Our advice site has selected the most common problems homeowners can face. We will figure out how to solve them, what problems really arise, and what are connected with unfulfilled expectations.

Possible problems of plastic windows and & nbsp; their solution

The first problem

The windows are sweating, “crying”, flowing. It is very important to understand where exactly this is happening! If inside a double-glazed window, between the frames and the glass, this is a factory defect. The windows were depressurized, the technology of their assembly was violated. Urgently to the window seller with a request to fix the problem. If the window is leaking and sweating from the side of the room or street, that is, outside, drops and condensation can be easily wiped off with your hand – this is your problem. Our website sovetov.ru has already written in detail about the reasons for this phenomenon and the fight against it indoors.

Possible problems of plastic windows and & nbsp; their solution

Second problem

Behind the sash, water has accumulated on the profile. They opened the sash and saw it. What to do? In fact, water often gets on the profile during rain, there may be micro crevices, a loose seal. This is not a problem if the manufacturer has provided for the presence of drainage holes in the PVC window through which rainwater will calmly flow out. There must also be holes to compensate for the differential pressure, in which case the drainage will work efficiently. No drainage holes? Marriage! You need to contact the supplier.

Possible problems of plastic windows and & nbsp; their solution

The third problem

The seal is frozen. In winter, in frosts, ice appeared on the seal of the glass unit. The reason may be slot ventilation in cold weather. If the ventilation in the room does not work well, then the condensate falls on the seal and freezes. This problem needs to be solved by arranging effective ventilation in the room. If the glass unit freezes in a closed state, then you need a more energy efficient one! At least two-chamber, preferably with argon between the frames. Such windows will definitely not freeze through, choose the right option for your climate.

Possible problems of plastic windows and & nbsp; their solution

The fourth problem

The sash sagged. They can be quite heavy, so over time they start to “strike” on the windowsill. The services of your window company or other professional repairmen will help to cope with the problem, who will carry out repacking, that is, remove the glazing beads and reinstall the glass unit. But the easiest way is to prevent sagging of the sashes by ordering a double-glazed window with such a small but important piece of fittings as a microlift.

Possible problems of plastic windows and & nbsp; their solution

Problem five

At low tide the rain is drumming very loudly. Irritating, especially in the bedroom. It is best to prevent this problem by immediately ordering a special “quiet” ebb, which will be installed outside the window. Or change your metallic ebb for a “quieter” one later, after finding out that there is a problem with noise during rain.

Possible problems of plastic windows and & nbsp; their solution

Problem six

The windows are whistling. In general, it is difficult to call it a problem. This is a common occurrence, just as the ajar windows of a car whistle when driving fast. Just close the window completely, apparently there is a strong wind outside. If the window whistles when closed, then, apparently, there is a problem with the ventilation valve, it needs to be adjusted.

Possible problems of plastic windows and & nbsp; their solution

Seventh problem

The doors began to creak. This is not a manufacturer’s problem either. Apparently, dust and dirt got into the perimeter fittings. You need to carefully clean the space between the doors and just lubricate the metal parts of the fittings.

Possible problems of plastic windows and & nbsp; their solution

Problem eight

Blowing from the window. First make sure that this is the case. Maybe your windows just got very cold, the window sill blocks the radiator and cold air comes from the window. If it actually comes through from the window, you need to adjust the fittings so that the sashes close tightly. We strongly recommend that you also replace the seals. If all these measures did not help, the window mounting technology may have been violated. In this case, you should contact professionals and make a complaint to the company that installed the glass unit.

Possible problems of plastic windows and & nbsp; their solution

Problem nine

We changed the window, but the house did not become warmer and quieter. Here we are already talking about disappointed expectations. Choose the right window initially! Ask the manufacturer about the level of sound insulation, the level of noise absorption. The same goes for providing warmth, the windows should not be too thin, you need to select the one suitable for your climate. Triple-glazed windows may be a better, albeit more expensive solution.

Possible problems of plastic windows and & nbsp; their solution

Problem ten

The plastic of the glass unit turned yellow. Here, the reason may be the initially low quality of PVC, which may turn out to be secondary and simply cheap. Usually a slight yellowness in this case is visible initially. To preserve the white color during operation, the manufacturer must add calorizers and other chemical elements to the plastic. Find out about this and the level of lightfastness of the material. Most often, plastic windows turn yellow in the southern regions under the bright rays of the sun. There is nothing you can do about it. But if the frame has turned yellow due to dirt, tobacco smoke in the apartment, city smog, it is quite possible to wash it with special means. Note that yellowness will not affect the performance properties of the window..

Rate the article
( No ratings yet )
Recommender Great
Tips on any topic from experts
Comments: 3
  1. Hadley

    What are some common problems that arise with plastic windows and how can they be effectively resolved?

    Reply
    1. Madison Ross

      Some common problems with plastic windows include condensation, drafts, and difficulty in operation. Condensation occurs when warm moist air inside the house comes into contact with the cold glass, leading to water droplets on the window. To resolve this, ensure proper ventilation and airflow in the house. Using a dehumidifier can also help reduce moisture levels. Drafts can be caused by improper installation or worn-out weatherstripping. To fix this, reseal the windows or replace the weatherstripping. Difficulty in operation may result from issues with the locking mechanism or hinges. Lubricating the moving parts with silicone spray can often address this problem. In more severe cases, professional window repair or replacement may be necessary. Regular maintenance, such as cleaning the glass and checking for damaged seals, can also prevent many issues with plastic windows.

      Reply
  2. Gabriel Davis

    What are the common problems that can occur with plastic windows, and how can they be resolved?

    Reply
Add comments