...

Cleaning after renovation: techniques, secrets, experience

This WordPress post provides professional tips and ideas on cleaning after renovation, which can be difficult to do. It explains the essential techniques for achieving the best results, including deep scrubbing and the use of specific cleaning tools. It also shares the secrets to cleaning hard-to-reach places and surfaces, giving the reader both the experience and knowledge on how to complete the cleaning effectively and quickly. The post provides an in-depth approach to making sure all renovations are fully cleaned, allowing readers to overcome any doubts and challenges.

Recommendation points



In this article, you will learn how to protect your home or office from excess debris during renovations and effectively clean all surfaces from dirt and dust. We will talk about the main problems associated with the disposal of construction waste and how to deal with different types of pollution..

Cleaning after renovation. Techniques, secrets, experience

Cleaning is no less painstaking and careful process than fine finishing, therefore it takes a lot of time and effort. There are several ways to avoid excess contamination during renovations and to make cleaning easier..

Problem No. 1. General work plan

The most unpleasant situation is when you have to work in an already finished building, or use it as a temporary warehouse or passage. When planning a renovation or restoration, be sure to consider the possibility of preserving the finished premises – so that you can completely finish and close each room. This can cause some inconvenience with the movement of material and the order of work inconvenient for the master, but it is guaranteed to save you from unnecessary cleaning and the risk of damaging the finished surfaces..

Problem number 2. Large debris

If dismantling is planned, do it in full first. Everything that needs to be broken, knocked out, cut off – do it before the first material is delivered. Then you should carry out the “dirty” work – punching openings, masonry, screed. At this stage, large garbage is formed, for which you should prepare used bags in advance and order a car for removal. Such garbage is not considered household waste, so you will have to take it out yourself.

Cleaning after renovation. Techniques, secrets, experience

Advice.In each city there are transport companies that offer services for the removal of construction waste – it costs some money. If you agree with a construction company-developer, removal will be much cheaper (garbage is used for filling roads and pits).

Problem # 3. Dust

It is the most difficult companion to remove in virtually all jobs. Fine cement dust, grinding and drilling products are clogged in crevices, corners, folds and are removed very “reluctantly”. The accumulations of this harmful substance are divided into three categories..

Planes – walls, floor, ceiling

To combat dust during and after work, the main assistant is a vacuum cleaner. The brush with different attachments will remove dust from any surface.

Cleaning after renovation. Techniques, secrets, experience

Advice.If you have to overhaul the entire apartment, we recommend renting an industrial vacuum cleaner with a wet cleaning function for cleaning. This unit will draw water and detergent from the tile floor or walls..

Attention! A household vacuum cleaner may not be able to handle large amounts of fine dust.

In general, an industrial vacuum cleaner can solve almost all tasks of collecting dust in any area. Only a soft brush can replace it, but the labor intensity will increase significantly.

Doors and windows

The problem with these interior elements is the mechanisms and the adjacent surfaces. Dust from drilling and grinding will inevitably clog into window frames, door hinges and locks when ventilated, so all these areas should be thoroughly vacuumed.

Advice.Have a few good paint brushes of varying sizes ready for use only for dusting. This will help clean corners, grooves and crevices in the absence of a vacuum cleaner..

Cleaning after renovation. Techniques, secrets, experience

It is best to protect decorative elements and moving parts in advance by gluing them over with masking tape. When cleaning small window grooves, use a brush and a spray bottle with a solution of household detergent.

Lighting

If you plan to use recessed lights, install them at the stage of furniture drifting. During operation, you can connect a temporary socket with a lamp for lighting. Dust often clogs under the shade, and the luminaire loses its decorative appearance, moreover, it can overheat. If this does happen, remove and clean the cover or rinse it.

Problem # 4. Spots

There is one law in handling solutions and liquid formulations: you cannot stain wallpaper and fabric, everything else can be washed. All finishing materials, depending on the severity of their removal, can be divided into three groups.

Water soluble.These are common finishing materials that are used in finishing in 90% of cases due to their absolute non-toxicity:

  1. Acrylic paint and putty. The first rule is to wipe while wet. The acrylic compound, as a rule, spreads into a thin spot, which is difficult to break off later. Therefore, it is better to remove it before solidification..
  2. Gypsum compositions. In the midst of work, while filling the walls, the master does not notice how small portions of the mass are torn off the spatula. Gypsum can be easily removed from any surface with a spatula or hard brush. Residues are washed with water.
  3. Wallpaper glue. If it is spilled on a smooth surface, you can simply wait until dry and clean with a dry cloth.

Cleaning after renovation. Techniques, secrets, experience

Chemically active.In home and office renovation, it is most often alkyd enamel. It is not completely removed from wood and fabric surfaces. It can be cleaned from other surfaces with any solvent.

Alternative helpers

In addition to a vacuum cleaner, other tools and methods can be used for effective and high-quality cleaning:

  1. Steamer. This household appliance will help clean the surface contaminated with a water-soluble compound. Hot steam will saturate the dried composition, which is already chemically inactive, and facilitate its cleaning.
  2. Building hair dryer. It will help in several directions at once. With it, you can quickly clean areas of dry dust. It is also effective for removing adhesives – just warm up the glue and wipe it off. Similarly, you can warm up enamel or any other polymer..
  3. Thinner “White spirit”. They can wipe away absolutely everything. There is only one drawback – it is toxic. Use a spray bottle and respirator. Don’t dissolve the solvent in water – it doesn’t make sense.
  4. Conventional detergents. For independent “budget” cleaning after repairs, they are quite enough.
  5. Boiling water. The hotter the water you use when cleaning, the better (faster and easier) the result will be..

Cleaning companies

Undoubtedly, the most effective and least time consuming way to clean the apartment from the remnants of repairs is to do it by someone else. Firms providing cleaning services provide an opportunity not to get involved with the “dusty and dirty” business at all. A number of indisputable advantages make them the leader in cleaning after renovation:

  1. Professionalism. Company employees undergo internships and learn to handle tools and chemicals in advance, and not in the process of paid cleaning.
  2. High quality chemistry. Companies with the name have contracts for the direct supply of safe household chemicals and special products. It is easy for the customer to control.
  3. Disinfection. If necessary, this procedure is possible for domestic and commercial kitchens..
  4. Speed. The firm is always interested in the fastest completion of work. At the same time, the customer does not have to find time to control or correct the process.
  5. Responsibility. The company is responsible for the actions of employees in the event of damage to furniture or surfaces.
  6. Additional services. Cleaning companies mainly provide related services – moving, delivery, assembly, furniture placement, polishing and waxing of parquet and furniture, outside window cleaning, carpet cleaning with take-out, etc..

Cleaning after renovation. Techniques, secrets, experience

The cleaning company takes money for its work, but by paying for their services, you save something more valuable – time. Therefore, trust in professionals is always justified.

Rate the article
( No ratings yet )
Recommender Great
Tips on any topic from experts
Comments: 1
  1. Riley Turner

    What are some effective techniques and secrets for cleaning after a renovation? Do you have any useful tips or personal experiences to share?

    Reply
Add comments