...

Rain hoppers: varieties, features of use and installation

Rain Hoppers are a unique type of rain gutter that offer a variety of features for optimal rainwater capture and drainage. They are designed to install quickly and easily to virtually any surface without the need for tools, and boast high quality and dependable performance. Rain Hoppers feature a lightweight design that's strong enough to withstand wind and rain, and their low profile ensures that they blend in seamlessly with any exterior design. Through use of their multiple grill patterns, the flow of rainwater can be maximized for effective drainage, while their seamless construction eliminates the need for additional sealing to prevent water leakage.

Rain hoppers: varieties, features of use and installation

A rainwater inlet is a special reservoir, part of a storm sewer, the arrangement of which we have already written. The rainwater receiver is the point part of the entire rainfall.

Water gets into the inner space of the stormwater inlet during rains and melting snow. The tanks themselves are necessarily made of materials that can withstand the extreme conditions of temperature changes and high humidity. In addition, a reliable stormwater inlet should not suffer from the pressure of water during heavy rainfall and sudden melting of snow..

Rain hoppers: varieties, features of use and installation

The set of a standard factory gully includes: a waste collection basket, which you will have to clean regularly, siphons, partitions, the container itself and the grate. There is such a model, which is shown in the photo, 900 rubles. Despite the fact that the stormwater inlet is plastic and does not look very reliable, the manufacturer guarantees a service life of at least 20 years.

Rain hoppers: varieties, features of use and installation

The grating of the storm water inlet can also be metal, most often cast iron. This option is more durable. The container is usually concrete. The grate of the storm water inlet has two functions – decorative and protective, it does not allow large debris to enter the water tank. In addition, thanks to the grate, there is no risk that a pet will fall into the tank or someone stumbles..

Expert advice – For use in a private area, a regular, inexpensive plastic rainwater inlet is perfect. If you doubt the strength of the grate, replace it with a cast iron one by purchasing it separately. Such a structure, fixed in concrete, will gain additional reliability and a longer service life..

Rain hoppers: varieties, features of use and installation

Rain hoppers: varieties, features of use and installation

Storm inlets are:

  • Rectangular – DB, that is, “large storm water inlet”.
  • DM – “small storm water inlets”. They can be not only rectangular, like the previous version, but also round, square. Rain hoppers DM are also called trunk lines, they are usually installed in places with heavy transport congestion, with high traffic.
  • DK – “round storm water inlets”.

Rain hoppers: varieties, features of use and installation

Storm water inlets are mounted under the gutter pipes so that water enters the tanks and storm sewers immediately from the roof, without spreading over the blind area and the site. In addition, it is advisable to install storm water inlets directly on the lowered section of the garden path, in the lower part of the yard, where water flows during heavy rains. This will help prevent puddles..

Rain hoppers: varieties, features of use and installation

The installation of the storm water inlet, after the location has been selected, includes the following steps:

  1. Pit preparation. Standard dimensions of storm water inlets: 300x300x300, 400x400x400 and 500x500x500 millimeters. The pit should be about 10 centimeters wider and 20 centimeters deeper than the dimensions of the tank.
  2. The bottom of the pit is compacted, crushed stone is poured, a thin layer of concrete is poured on top.
  3. If there are no holes in the plastic stormwater inlet for storm sewer pipes, they are cut out before installation.
  4. On the sides, the storm water inlet is also filled with concrete.

Rain hoppers: varieties, features of use and installation

Rain hoppers: varieties, features of use and installation

After installing storm water inlets, you must not forget about them! Otherwise, they will become clogged with debris, which can lead not only to a deterioration in throughput, but also the appearance of a musty, unpleasant odor from the tank. Maintenance of storm water inlets is simple – you need to regularly remove the grate, flush the system with water pressure, clean sand traps and waste baskets.

Rate the article
( No ratings yet )
Recommender Great
Tips on any topic from experts
Comments: 1
  1. Wyatt Simmons

    Can you provide more information on the different varieties of rain hoppers available, along with their features, and explain how to properly install and use them?

    Reply
Add comments