How to choose the right fittings. Overview of new products

In order to maximize the service life of window fittings, it is necessary to give preference to models of well-known manufacturers when purchasing it. In most cases, they confirm the high quality of their product with appropriate certificates..

There is always a risk that the purchased cheap fittings from little-known manufacturers will soon fail. As a result, the owner will have to spend his time and money replacing broken mechanisms and parts..

In practice, there is such a rule: high-quality fittings must be equipped with metal power elements designed for a load exceeding the nominal weight of the window. If it is necessary to apply a lot of force when closing or opening the sash, this means that the hardware is of low quality and will fail much earlier than its warranty period..

Moving elements of window fittings must be treated once a year with machine oil or special agents included in the set for the care of plastic windows. It must be remembered that all handle maintenance operations should be performed only with the window sash closed. In the process of repair work, paint, glue, sealant and other substances are not allowed to get on the fittings parts.

The great competition in the modern market determines the annual improvement of products offered by different manufacturers. For example, Roto GT has developed GT fittings for sale in the Russian market. In the course of its manufacture, high-strength materials are used, due to which the products do not need complex maintenance during operation. Window handles are designed in such a way that no fastening screws are required to install them.

If you order Roto NT Designo fittings, you will end up with a window on which all the hinges will be hidden, thanks to which the maintenance of the plastic profile will take a minimum of time. At the same time, the window sash opens up to 100 degrees.

Among the novelties on the market, one can also note the new Titan AF hardware model, which was developed by SIEGENIA-AUBI. This model has increased reliability and durability, provides a soft handle movement and excellent smooth opening of the sash. The entire product line is equipped with a micro-ventilation mechanism and a closer, which makes it easier to pull the sash. When using Titan AF, any blowing and penetration of street noise are excluded.

Winkhaus also introduced a novelty – the tilt-slide fittings duoPort SK. This model is used on large-area windows (up to 2.8 meters high) designed for wall glazing from floor to ceiling. According to the manufacturer, duoPort SK fittings provide easy movement and tilt of wooden or PVC windows with a maximum load capacity of 160 kg. In addition, this model can be equipped with narrow profile systems that maximize the illumination of the premises. The visible parts of these fittings can be made in brown or white, depending on the wishes of the customer..