How to apply decorative plaster

The content of the article

• Types of decorative plaster
• How to make decorative plaster
• Materials and Tools
• Application Methods
• How to paint decorative plaster
• How to prepare walls for decorative plaster
• DIY video tutorials on applying decorative plaster
• Craquelure
• Under the stone
• Fur coat
• Rain
• Wet silk

Liquid wallpaper, flock, compositions imitating masonry (wood) are very popular in our time. All this relates to a fashionable method of exterior and interior decoration. How to apply decorative plaster, what is this mixture? You will learn the rules for preparing the composition from the presented review. This seamless finish is a great replacement for wallpaper and other materials..

Types of decorative plaster

Finishing by manufacturing technology is divided into three types:

1. Textured has a coarse structure of high viscosity.
2. Structural contains marble chips, the result of the application is a smooth granular surface. It is well applied on drywall and other mineral surfaces..
3. Venetian – decorative stucco under a stone, has a uniform texture. As a result of application, it forms a perfectly smooth surface similar to natural marble..

Depending on the obtained surface topography, textured plaster is divided into several subspecies:

1. The lamb makes the surface of the wall evenly grained.
2. Bark beetle. The surface treated with such plaster resembles corroded wood.
3. Fur coat makes the wall roughened and fleecy.
4. Travertino is an imitation of brick or masonry.
5. Panel – volumetric drawing.

Binder Classification:

• acrylic (based on acrylic resin);
• mineral (based on cement);
• silicone (based on synthetic resin);
• silicate. (With liquid glass).

In addition, specific types of this finishing material should be highlighted:

1. Color is represented by 15 shades. Used as interior and exterior.
2. Rollerball contains a natural filler in the composition.
3. Latex plastic gives the surface a smooth and glossy look..
4. “Wet silk” contains pearlescent particles, gives the surface of the wall or shelf the appearance of shiny fabric.
5. “Sea breeze” contains fine sand, it is used only for interior decoration.

How to make decorative plaster

After applying the primer to the walls, proceed with the preparation of the decorating composition. How is decorative plaster made? There is nothing complicated in this, the material is realized in the form of a dry mixture, which is bred according to the instructions. If solid components (pebbles, pieces of tiles) are added to the composition, the surface will acquire an unusual pattern. 1/10 paint is added to give the desired color.

Decorative plaster from ordinary putty can be prepared independently at home. This option is relevant for those who would like to save money by making repairs in the apartment. The plaster is prepared in a bucket: putty of any manufacturer’s company (Ceresit, Dufa) is mixed with grout and water. Complement the composition with the selected dye and other decorating elements..

Materials and Tools

Before starting work, it is important to take care of preparing the tools. You will need the following:

• drill with appropriate nozzle;
• bucket;
• structural roller;
• spatulas;
• trowel iron;
• grater or sandpaper for leveling;
• brushes and sponges.

Materials for the preparation of the composition are used depending on the chosen putty option. Can be applied:

• wax;
• acrylic lacquer;
• white putty;
• means for grouting joints;
• dyes.

Application Methods

The technique of applying decorative plaster is a creative process that does not require special skills. Anyone can stay in the role of a master painter, doing the design of his room with this material. Before starting work, the walls are leveled and primed. The composition is applied in a layer of 2-5 mm with a spatula, trowel or roller. It is advisable to choose a tool that allows you to capture a large area.

Walls are decorated with decorative plaster in different ways, depending on the composition and consistency of the mixture:

1. Method of application with a spatula. The composition is distributed on the wall or ceiling in a circular motion or up and down.
2. Large brush distribution will give a wave-like pattern.
3. Toothed roller, trowel or stamps give a repeating embossed ornament.
4. Using crushed polyethylene will allow you to get a non-standard surface relief.

At the end of the distribution of the mixture, some time will pass until it completely dries out (8-48 hours). Over time, the walls are leveled and cleaned of dust with a sheet of sandpaper. After this, a protective layer or wax is necessarily applied to the surface. As a result, the plaster will be protected from premature destruction by moisture and dirt..

Is it possible to apply decorative plaster on the plaster, depends on the type and texture of the mixture. If it is coarse-grained, then it is allowed to apply the composition immediately to the primer. Fine-grained decorative plaster applied by roller requires an additional layer of regular plaster. It is important to wait until it is completely dry before application (this can take several days).

How to paint decorative plaster

Decoration of walls with decorative plaster sometimes requires additional painting. Depending on where the walls are decorated (exterior or interior, kitchen or corridor), the design is complemented by new shades or whole paintings. Due to this, the plastered surface becomes voluminous, and the interior becomes full. It is important to choose and apply paint.

Facade and interior paints are made on the basis of acrylic, silicate, water or silicone. In addition to the choice of paint, it is important to know its consumption, it is indicated on the package. As a rule, the height of the surface topography significantly increases its consumption. The technique of how to apply paint to decorative plaster differs depending on the surface topography and the type of plaster mix.

How to prepare walls for decorative plaster

Before applying the mixture to the surface, it is carefully prepared. The wall is cleaned of the remnants of wallpaper, exfoliated layer of old finishes and other. Additionally, before applying prepared decorative plaster, the surface is leveled and primed. For processing the wall, ordinary primer and impregnation are suitable, which differ only in the method of application.

DIY video tutorials on applying decorative plaster

Visual video instruction on how to work with decorative plaster will be useful to everyone who is going to use this technique to repair their apartment. You will see the stages of self-registration of premises and a sample of the final result in the video below. After viewing them, everyone will be able to decide what type of finish to choose..

Craquelure

Under the stone

Fur coat

Rain

Wet silk