...

How to clean a washing machine with citric acid

This post provides an effective method to deep clean a washing machine using citric acid. Through this method, users can easily remove the limescale, detergent build-up, and any odors caused by bacteria. Citric acid is an effective and natural cleaner that is safe to use and won’t harm the machine. It is also very affordable and available in grocery stores. This guide outlines the steps needed for a monthly maintenance wash as well as a descaling wash, making it practical and easy to follow.

The content of the article



Constant washing in hard water quickly leads to breakage of the washing machine. Salt deposits on the heating element and other parts of the unit, which eventually leads to the formation of scale. Experts recommend regularly cleaning the machine, and the most inexpensive and effective cleaner is citric acid..

Why do I need to clean the washing machine

An automatic machine is an expensive pleasure even for a modern woman. If you do not look after her, then she will quickly fail. The worst enemy for a miracle unit is tap water, which contains rust, scale, chemical compounds that reduce the life of the machine. In order for the purchased washing equipment to be functional for a long time, it must be cleaned from mold, dirt and scale.

Cleaning the washing machine

In the process of working on the plastic and metal surfaces of the unit, a lot of mineral deposits accumulate in which bacteria live, which bring an unpleasant odor. Poor detergents that do not dissolve in hard water and dirt that gets stuck during operation of the unit can become a source of contaminants. Limescale poses no less threat to the normal functioning of equipment, since it does not allow heat to pass through well.

Because of this, the device starts to work in the enhanced mode, and its elements quickly burn out. Scale is formed due to salts that are in the water. At high temperature, they settle on the surface, then solidify on all internal elements with a thick layer. In order not to waste money on expensive repairs, it is necessary to periodically remove dirt, mold and scale using industrial or household tools.

Is washing the washing machine effective with citric acid

As soon as they began to produce industrial-scale automatic washing equipment, housewives became interested in how to clean the washing machine with citric acid or soda? At that time there were no water softeners and special means for these purposes. Cleaning the washing machine from limescale with citric acid has several advantages:

  • cheap and economical compared to other methods;
  • does not harm TENU;
  • perfectly cleans heating elements;
  • the process is not hassle and does not take much time.

Chemicals do not risk all housewives to use, because they are not rinsed from clothes and linen. Lemon is harmless to humans, and to clean the equipment you will need only a small dose of the product, which is completely removed with water. If you use food concentrate in moderate doses, it does not damage plastic parts, rubber cuffs, heating elements and other parts of the washing machine.

Citric acid for cleaning a washing machine

How to clean your washing machine with citric acid

To clean the limescale in an automatic machine designed for 4 kg of laundry, you need 60 grams of food concentrate. Since the product is sold in small packages, 3-4 packages are enough for one procedure. Excessive use of the substance may cause damage to the unit. How to clean the washing machine with citric acid from scale and eliminate an unpleasant odor? Follow the step by step instructions..

How to clean the washing machine from limescale citric acid

To rinse the automatic machine from limescale, mold and bad smell, use the following recipe:

  1. Make two bags of lemons. Pour it into a special powder compartment.
  2. Check for foreign objects inside. Do not forget to bend the edges of the gum.
  3. Turn on the full program, which runs at the highest possible temperature..
  4. Program an extra rinse. If there is no such program, then after the cycle is completed, repeat the rinse procedure by pressing the corresponding button.
  5. After finishing do not forget to wash inside the drum. There may be limescale residues that need to be removed.

How to clean the drum with citric acid

The first method removes scale from the heater of the machine well. How to clean the washing machine with citric acid inside, because there is also a coating on the drum?

  1. Pour food concentrate into the drum. Take no more than 100 grams.
  2. Set the temperature mode from 60 to 90 degrees. Lower temperature will not dissolve substance.
  3. Run the longest mode. After 10 minutes, stop the program and pause for one hour so that the concentrate reacts with lime deposits.
  4. After continue the program. If the process is accompanied by a hum – it is the split particles of scale fall into the drain, which means: cleaning is successful.
  5. At the end, rinse the unit again with an additional rinse.

Washing machine drum after cleaning

How safe is citric acid for a washing machine

Before you try to rinse the machine, you should take care of safety measures. Do not fall asleep too much concentrated powder, as it can damage parts due to the intensity of chemical processes. Cleaning should be carried out only if the drum is empty, otherwise the food concentrate will corrode and scale, and things that will be there.

Rate the article
( No ratings yet )
Recommender Great
Tips on any topic from experts
Comments: 4
  1. Oakley

    Can anyone provide a step-by-step guide on how to effectively clean a washing machine using citric acid? I’ve heard it works wonders, but I’m not sure about the exact process. Any tips or suggestions would be greatly appreciated!

    Reply
  2. Juniper

    Can someone guide me on how to effectively clean my washing machine using citric acid? I’ve heard it’s a great natural cleaner, but I’m not sure about the process. Any tips or step-by-step instructions would be greatly appreciated!

    Reply
    1. Noah Cohen

      To effectively clean your washing machine using citric acid, follow these steps:
      1. Start by emptying your washing machine completely.
      2. Dissolve about 1/4 cup of citric acid in warm water.
      3. Pour the solution into the detergent dispenser or directly into the drum.
      4. Run a hot water cycle with an extra rinse.
      5. After the cycle is complete, wipe down the drum, rubber seals, and detergent dispenser with a cloth soaked in citric acid solution.
      6. For stubborn stains or residue, create a paste with citric acid and water and scrub the affected areas.
      7. Rinse the drum, rubber seals, and detergent dispenser thoroughly with clean water to remove any citric acid residue.
      8. Leave the washing machine door and detergent dispenser open to air out and dry completely.
      Remember to always follow the manufacturer’s instructions and safety guidelines, and consider consulting the washing machine manual for any specific instructions.

      Reply
  3. Penelope Russell

    Can you please provide detailed instructions on how to effectively clean a washing machine using citric acid? I’m interested in knowing the specific measurements and steps involved to ensure a thorough and safe cleaning process. Additionally, are there any precautions or tips I should keep in mind while using citric acid for this purpose? Thank you in advance for your guidance!

    Reply
Add comments