How to get rid of fungus in the cellar

The content of the article

• How to remove a fungus
• How to handle mold and mildew cellar
• Processing cellar from mold and fungus with a sulfur checker
• How to get rid of mold in the basement with lime
• Basement treatment for mold and mildew bleach
• Mold and fungus treatment with boric acid
• How to clean the cellar from mold and mildew with vodka

One of the favorable places for the spread of fungus is the cellar. Often, harmful spores reproduce due to high humidity arising from poor ventilation and insufficient waterproofing. Many people wonder how to process the basement from fungus and mold. There are many effective methods to combat this unhealthy misfortune..

How to remove a fungus

The first step is to eliminate the cause of the fungus – excessive humidity. Pay attention to the condition of the drainage system, sewer pipes. If communication is in order, then most likely the reason is different – ventilation or waterproofing. Mold is afraid of dry, warm, ventilated places, so first check the hood is working properly. The fight against fungus and mold in the basement requires a thorough study of the state of waterproofing, on which the appearance of moisture in the underground directly depends.

Particular attention is required to old wooden houses. Over time, in such buildings, the primary waterproofing layer is destroyed, it requires urgent updating. After eliminating the primary causes of the appearance of the fungus, you can begin to fight with harmful spots on the ceiling, walls, floor of the cellar. It is better to take measures immediately, as the mold becomes visible to the naked eye. The fungus actively isolates and distributes spores that are very harmful to the human body – it must be urgently disposed of.

How to handle mold and mildew cellar

In stores you can find many tools that help get rid of the fungus. They differ in composition and effect – the duration of their action. The whole process of mold destruction is called disinfection, and before you fight mold in the cellar, you need to do the initial preparation:

1. Clean the cellar of all objects – disassemble the shelves, take out preparations of vegetables / drinks for the winter, other stored things.
2. Get a hard metal brush, go through it in all places where mold spots are visible.
3. If the floor in the earthen cellar, then remove a small layer of the upper soil.
4. If there are wooden racks, also process them, dry in the fresh air.
5. Block all air vents and vents before applying the product..
6. Proceed with the destruction of the fungus by the means described below.

Processing cellar from mold and fungus with a sulfur checker

White mold in the cellar lends itself perfectly to the destruction of fumes from sulfur dioxide. This tool is considered the best – experts recommend using it first. It is used very simply: after blocking the air, a sulfur block is placed in a tin basin and set on fire. Hurriedly leave the room, closing the door tightly behind you, since smoke emission is dangerous for people and animals. After 9-12 hours of processing (see instructions), the cellar is thoroughly ventilated, dried with slaked lime, which absorbs moisture well.

How to get rid of mold in the basement with lime

By the way, lime is another inexpensive, easy-to-use means of combating fungus. It is often used not only to get rid of mold, but also for preventive purposes. Before destroying the fungus under the floor with lime, be sure to use bins, boards, shelves, treat with deactin. The product is mixed in water, applied to all painted surfaces. An important nuance: carry out the procedure in the fresh air – in order to avoid poisoning, damage to the respiratory tract.

There are several recipes with lime:

1. With formalin. In a bucket of water, take bleach (500 g), formalin (200 g). Treat all surfaces of the cellar with compound. Dry the walls, ceiling, floor with a simple airing.
2. With copper sulfate. In two buckets of water, take 1 kg of slaked lime, enter 100 grams of copper sulfate. It is desirable to distribute the solution in the subfloor using any sprayer..

Basement treatment for mold and mildew bleach

A universal remedy such as bleach will allow you to quickly and easily get rid of the fungus in the cellar. It has an efficiency similar to the properties of smoke bombs. Before you start working with chlorine, you need to take care of precautions. This is a very caustic substance, so be sure to wear rubber gloves, a respirator, ideal – find any protective clothing. The most famous chlorine-containing product is White, but specialty stores sell other drugs (bleaches, powders).

How to get rid of fungus in the cellar using chlorine-based products:

1. Thoroughly clean the surface you will work with with an iron brush..
2. Prepare a solution. For example, one part of White to ten parts of water.
3. For more effect, add two tablespoons of salt.
4. Apply to all surfaces of the room, paying particular attention to visible plaque.
5. To improve the result, you can apply the product on cotton wool, leave after processing in places of mass accumulation of spores for the entire drying time.
6. Do not forget to apply the solution on iron racks, shelves from boards.
7. Ventilate the room well after the procedure..

Mold and fungus treatment with boric acid

Boric acid can be a great helper in the fight against fungus. It is better to mix it with some other active substances – you get an amazing effect. To get rid of fungal stains, you must:

1. Mix water, vinegar, boric acid and hydrogen peroxide (proportion 4: 1: 1: 1).
2. Spray the solution on all surfaces (wooden, metal) and carefully rubbed with a large piece of cotton wool.
3. After the procedure, ventilate the room, as the product is toxic, and can be absorbed not only into the boards of which the shelves are made, but also in other materials.

How to clean the cellar from mold and mildew with vodka

As a folk remedy against fungus, ordinary vodka is often used. There is no need to prepare a special solution: alcohol is poured into the spray bottle, sprayed at the places of accumulation of mold spores, previously cleaned with a metal brush. The tool is universal, it is suitable for different surfaces. In order not to damage the paint applied to the shelves / racks (and it did not start to swell), soak a large piece of cotton wool with vodka and go to the problem areas.