How to get rid of mold on the walls of folk remedies. Getting rid of black mold forever, photo

The content of the article

• Causes of mold on the walls
• Black mold on the walls
• Means for removing mold from walls
• Folk remedies for mold
• Mildew Prevention

An unpleasant picture is the appearance of black, brown, green spots on the walls of the dwelling. Whatever you wipe and paint over, the mold appears again. The unpleasant smell and spoiled interior of the apartment is not all. Mold is a direct threat to the health of your family, the body can respond to it with allergies and even asthma. Therefore, it is important to know how to get rid of mold on the walls..

Causes of mold on the walls

• The presence of moisture in your home, steam, condensation. Humidity and room temperature – ideal conditions for the development of the fungus.
• Poor indoor air exchange. Some parts of the room freeze more than others, moisture settles on them.
• Insufficient room insulation.
• Fogging of plastic windows.
• Poor ventilation due to plastic windows and sealed doors.
• Failure to dry the walls during repair.

Black mold on the walls

Mold has a fungal nature, its spores are constantly in the air. When suitable conditions are created for their development (heat and damp), the fungus begins to multiply.

At the first manifestations of the fungus, you need to urgently get rid of it. Here’s what you need to do:

• Tear off the wallpaper and clean all surfaces from the fungus, regardless of their mold damage, because even in clean areas there may be spores of the fungus.

• We apply anti-mildew on the cleaned areas, let the surface dry for at least 5 hours.

• We pass on the treated surfaces with a dry brush to remove the decay products of microorganisms.

• We rinse the cleaned areas with warm water, then dry again.
• After a day, primer the walls with a deep penetration primer.
• Plastering. After plastering, it is important to dry the surfaces thoroughly so that there is no moisture left..
• And the last stage of the work is the priming of the walls and wallpapering. Glue choose moisture resistant, with antifungal properties.

Means for removing mold from walls

Mold is removed by any antiseptic with antifungal action (Metas-BIO, spray can SCHIMMEL-ENTFERNER, NEOMID Bio). When buying a disinfectant in a store, be sure to ask the seller if it suits you.

Carefully read the instructions before use and observe safety measures when working with toxic agents (use gloves, goggles, a respirator, wear a robe, a scarf).

Folk remedies for mold

Help to get rid of this scourge and folk remedies that the hostess has on hand.

• Bleach. It affects all types of fungus. This product is suitable for non-porous surfaces (tiles, bathtubs, furniture, glass). We dilute the product in the proportions: 1 part bleach to 10 parts water. We apply the solution on the surface with a spray or brush, we work in rubber gloves and a respirator, since the preparation contains chlorine. After processing, do not wash off the product.
• Borax. We make a solution – 1 glass of borax per 2.5 liters of water, apply it to a dry, cleaned wall.
• Vinegar. Destroys almost all types of mold. We take white vinegar, apply with a spray and leave for an hour. Then wipe the area with water and dry.
• Hydrogen peroxide. We take a 3% peroxide solution and spray it so that the wall is well saturated with it. Leave for 10 minutes, then clean the mold well and rinse.
• Pure ammonia. Dilute the product evenly with water and spray to the surface, wipe off the mold. Remove remaining ammonia with a dry cloth.
• Tea tree oil. Dilute 1 teaspoon of oil in a glass of water. Apply the solution to the affected area. No need to rinse it off.
• Copper sulfate. Dissolve 100 g of powder in a bucket of water and treat the infected surface..

Mildew Prevention

So that your house does not “get sick”, monitor its condition:

• Heat the room well, use thermal insulation.
• Carry out plumbing work on time, repair pipes.
• Make sure that the roof does not leak.
• Treat wooden building materials with an antiseptic.
• Ventilate the room daily by fully opening the windows..
• Ventilate the bathroom constantly and do not close the door tightly..
• Dry the washed items well before putting them in the closet.
• Do not dry wet items in unventilated areas..
• Keep the ventilation systems in good condition; they must ensure constant air circulation.
• If you find damp places in the room, wipe them thoroughly with a rag.

If you know how someone from your environment gets rid of mold on the walls, share this experience in the comments at the bottom of the page. Your tips will help other people..