Manual meat grinder – how to assemble, an overview of the best models from cast iron, aluminum, stainless steel and plastic

The content of the article

• What is a manual meat grinder
• Device
• How to assemble
• Types of manual mechanical meat grinders
• Cast iron manual meat grinder
• Aluminum
• Stainless steel
• Plastic
• How to choose a manual mechanical meat grinder

Every housewife in the kitchen has such a necessary device as a meat grinder. The modern market offers a very large selection of automatic assistants, analogues with an electric drive. An ordinary mechanical meat grinder is not inferior to its position before automation, it is no less popular. There are several reasons for this, but perhaps the most important is ease of use..

What is a manual meat grinder

A manual meat grinder is a mechanical device that is necessary to grind meat or fish for minced meat. A device is used to process other products used in the manufacture of noodles, spaghetti, juice, cookies. The main advantage is the price, the ability to quickly assemble, grind, disassemble, clean. The only negative – a very time-consuming process when working with meat – requires the use of little physical force.

There are several types of devices for chopping meat. They differ in principle of action:

1. Manual or mechanical. The process of processing products manually, made of cast iron, aluminum, plastic, stainless steel.
2. Universal. Reminiscent of a food processor equipped with many functions and modes. Ideal for squeezing juices, making cookies, noodles. Safe.
3. Harvester. There is no auger familiar to users (rotary shaft). A special knife (impeller) turns all products into a homogeneous mass.

According to the materials of manufacture of the device for mechanical grinding of products, cast iron, aluminum, plastic, and stainless steel are produced. Features:

1. Cast iron is considered durable. The disadvantage is that with a sharp fall, there are splits in the case.
2. Aluminum is composition dependent. A device with the addition of silicon is considered durable, withstands shock. Aluminum-magnesium alloy is very fragile.
3. The plastic models are lightweight, equipped with a press for pushing meat, a vacuum mount that easily holds even in the middle of the table.
4. Practical stainless steel meat grinder.

The choice of many housewives falls on mechanical models of devices. This is explained by:

1. Low cost.
2. It is believed that the minced meat, which is processed on a hand-held device, turns out to be much tastier than on an electric meat grinder.
3. Independence from the power supply network. You can work in any conditions, for example, in the country.
4. Strength, the ability to quickly and cheaply replace, if necessary, parts. Dull knives – you can sharpen, lost tips – always on sale.
5. Compact size.
6. Silent operation.
7. Easy to assemble and use.

Device

The design of the device includes several components. The whole mechanism will work only if it is properly assembled. The classic configuration of a mechanical meat grinder – 7 parts. It:

• housing;
• bell of a meat receiver;
• Archimedes shaft or auger, which delivers meat to a knife;
• vane or circular knife;
• nozzles;
• grinding grill;
• fastening in the form of a clamping nut for a knife;
• pens;
• screw or suction cup.

The composition of the parts included in a mechanical device for processing products is similar to electrical, but there are still differences. Each of them has its own purpose. Characteristics:

• metal or plastic case – a molded container having a meat receiver (expanding up-tube-bell);
• spiral shaft – pushes meat to the incisors;
• knives – cruciform or disk-shaped;
• grill with holes of different diameters to control the degree of grinding;
• the clamping cap resembles a large nut in shape;
• handle – mounted on the rear of the shaft, mounted with gaskets and screws;
• latch – fixes the device to the table.

The first thing to consider when assembling this household appliance is that all the parts fit snugly together. The quality of forcemeat is affected by the contact density of the knife and grill. The classic version of the incisors is a four-blade. As for the gratings, they have different slots, but the smaller the holes, the more tender the meat will turn out. The kit includes additional parts in the form of metal (plastic) nozzles of various sizes and shapes, which are intended for the preparation of cookies, mashed potatoes, chopping vegetables and fruits.

How to assemble

To assemble a manual meat grinder, you must follow a certain algorithm. The sequence is as follows:

1. Take the case, the largest part with three holes.
2. In a large circular connector, place a shaft (screw-shaped), designed to push the contents to the cutters.
3. Attach the knife for the manual meat grinder with the concave part to the shaft (this position grinds the products).
4. Install the grill, fit tightly to the flat side of the knife. Make it necessary so that the notch (groove) on the part sits on the ledge of the housing. This will fix the grill.

After all the parts are installed, the next step is fixing. This is done in this way:

1. Everything is fixed by a large ring (clamping cover), which is screwed onto the body by thread.
2. The handle is fixed on the back with two gaskets and a screw.
3. The final stage is to place the device on a flat surface. To do this, you need to install the meat grinder on the edge of the table, with the screw located at the bottom of the case, screw it on the countertop according to the principle of a vice.

The principle of operation of such a device is to feed the ingredients for grinding into a meat receiver. It is not recommended to take very large pieces, because they may get stuck, which will lead to a stop of work. Have to disassemble the device and remove the meat. The spiral-shaped shaft pushes the meat towards the knives, cutting it into pieces (depending on the type of incisor). They go to the grate, the holes in which grind them to the desired state. The resulting minced meat leaves the nozzle and falls into a bowl, which must first be substituted from the side of the clamping lid.

Types of manual mechanical meat grinders

Varieties of mechanical meat grinders are determined by the materials of manufacture. On sale are models of cast iron, aluminum with various alloys, plastic, stainless steel. All of them have their advantages and disadvantages. Each buyer designates his selection criteria, so it’s difficult to make a rating, but the most popular models are listed below.

Cast iron manual meat grinder

A cast iron manual meat grinder is considered the most durable, but also heavy. Description:

• model name: manual Uralochka MCh-C with 4 nozzles;
• price: 990 rubles;
• characteristics: manufacturer Russia, weight 2.14 kg, metallic silver, cast iron, rubberized legs, loading tray, 4 nozzles included – 2 dough, meat, sausage;
• pluses: cheap, simple;
• Cons: out of the box it works poorly – you need grinding the grates and knives.

Mechanical cast-iron meat grinder Katun is in demand. Description:

• model name: MCH-S KATUN GOST 4025-95;
• price: 985 r.;
• characteristics: producer Russia, weight 2.3 kg, metallic silver, cast iron, average volume of the loading hopper, rubberized legs, a set of several nozzles for meat and fish;
• pluses: cheap, simple;
• cons: no.

Aluminum

Aluminum meat grinders are considered very durable and reliable. For instance:

• model name: “Diva-MPP” with a hopper;
• price: 836 p.;
• characteristics: high-strength aluminum, rubberized legs, manual drive for chopping fish, meat, other products;
• pluses: compact size and light weight, takes up little space in the kitchen;
• cons: no.

Kazan mechanical device is also in demand among buyers. Description:

• model name: Kazan MA-S 77.430.00;
• price: 600 p.;
• characteristics: high-strength environmentally friendly aluminum, light weight, rubberized legs, a drive for fish, meat, other products;
• pluses: compact size, takes up little space in the kitchen;
• cons: no.

Devices “Motor Sich” are able to quickly and efficiently grind products. For example:

• model name: Motor Sich 1MA-S;
• price: 489 r.;
• characteristics: used for processing small and large pieces of meat, light weight, rubberized legs, manual drive for fish, meat, production material – aluminum;
• pluses: easy, copes well with large pieces of meat;
• cons: no.

Stainless steel

A feature of any Gipfel cookware is ease of care. Meat grinders are no exception. For instance:

• model name: Gipfel 5405;
• price: 6 723 r.;
• Characteristics: made of stainless steel, used for processing small and large pieces of meat, perfectly grinds other products;
• pluses: copes well with meat;
• cons: high cost.

Plastic

The appearance of many plastic devices is very different from all those presented above. All devices have an original design look. For example:

• model name: Bradex Ekman;
• price: 1 750 r .;
• characteristics: made of high quality plastic, used to process any ingredients, silicone suction cups easily hold the structure on the table surface, the kit includes a tray, grills, several nozzles;
• pluses: the plastic case is less durable than metal;
• cons: high cost.

Plastic meat grinders are considered multifunctional. For instance:

• model name: Mayer & Boch;
• price: 1 750 r .;
• Characteristics: made of hygienic high-quality plastic, there are silicone suction cups that easily hold the structure on the table surface, a tray, grilles, several nozzles, equipped with stainless steel cutters;
• pluses: firmly attached to the surface;
• cons: no.

How to choose a manual mechanical meat grinder

The range of kitchen appliances for chopping products is very wide, which makes it difficult to choose. The criteria for focusing on a particular model are simple:

1. The material of manufacture. It all depends on personal preferences.
2. Equipment. If you plan to use it not only for meat, it is desirable that there are several nozzles.
3. The method of attachment to the table. This is especially true for plastic meat grinders. Silicone should be intact, durable, moderately tight.
4. Cost. The price of mechanical meat grinders is lower than electric, it depends on the material of manufacture, configuration.

You can buy a manual meat grinder in an online store, at specialized points of sale. Not very expensive, if there are shares, if a sale is taking place, the purchase will be cheap. The discount is provided for regular customers. In the regions of Moscow and St. Petersburg, the cost is not much different, but it is determined by the configuration, functionality of the meat grinder. You can arrange and order delivery by mail, courier or pickup.