...

Yucca plant with description and photo – growing a house, watering and treating diseases

The Yucca Plant is a great addition to any home, requiring minimal care and providing great beauty. A Yucca Plant can improve the quality of your home air, liven up any room, and is easy to maintain. Growing the Yucca indoors is a great way to add a touch of greenery and freshness to any space. Watering your Yucca Plant with room temperature water, and leaving it alone for a few days can help ensure the longevity of your indoor Yucca. Paying attention to any signs of disease, like browning or wilting leaves, can help you stay on top of any potential issues and keep your Yucca Plant looking its best.

The content of the article



A palm tree from South America – Yucca – home care for which includes both transplantation, reproduction, watering, and protection from various diseases, is an indoor plant. As a rule, caring for a yucca is based on preferences and habits laid down in the homeland of an evergreen tree. If you are going to get such a flower, carefully study its features.

What is yucca

Yucca is a genus of evergreens, belongs to the Agave family, grows in North and Central America. The xiphoid hard leaves of different yuccas can grow up to 100 cm long, up to 8 cm wide, they form a basal rosette or are often collected in a bunch. Based on the species, the leaf of the plant can be bluish or green, semi-rigid, erect, with smooth or jagged edges. Often the plant is covered with threads, sometimes there are sharp thorns on the ends of the leaves.

Yucca palm during flowering throws large peduncles, where there are many delicate fragrant bells in bright colors. As a rule, inflorescences are collected in one large panicle 2.5 m long. At home, the palm tree rarely blooms. The fruit is a dry or juicy box. From the leaves of some species of plants, fiber is extracted, which goes to the manufacture of wickerwork.

Yucca plant in pots

Views

Yucca flower is well suited for decorating household plots, apartments, used for the manufacture of medicines and cosmetics. More than 30 species of palm trees will grow in the homeland, often the size of the plant exceeds the trees of the temperate climate of Russia. European flower growers grow and propagate three decorative species that perfectly adapt to home conditions and have optimal dimensions for the room. The most popular varieties:

  • Elephantis or elephant palm (Yucca elephantipe). The plant got its name because of the thick original legs. The leaves are on top of it, and the trunk gradually becomes bare during growth. In summer, the tree is decorated with white flowers that look like bells.

Elephantis potted plant

  • Filamentous (Yucca filamentosa). The plant can withstand up to 20 degrees of frost. The xiphoid leaves with bright white threads bent at the top can reach 60 cm in length. The flower of the filamentous variety has delicate bells up to 7 cm long.

Blooming yucca filament in the garden

  • Aloeelist (Yucca aloifolia). The palm tree grows slowly, over time it begins to take the shape of a ball. In adult plants, the tree-shaped stem is well branched, at the ends of branches there are densified rosettes of fleshy green leaves.

Yucca aloifolia in landscape design

  • Sisaya (Yucca glauca). The trunk of such a flower is short, leaves are elongated and thin, light at the edges. Bells have a yellowish or greenish-pale color. The gray yucca grows normally in air, withstands drought and moderate frosts well. Leaves are able to reach 90 cm.

Yucca glauca in the open ground

How to care for yucca at home

The palm should grow at home on the south window, although if other windows are well lit, you can place a flower next to them. The yucca houseplant develops well in a bright, warm room. A young sprout needs light, but it’s better to shade it a bit from direct sunlight. In the process of growing, artificial lighting can also be used..

The palm prefers a moderate temperature in the summer and spring, approximately 20-25 ° C. In winter and autumn – within 8 or 12 ° С. To improve the appearance of the flower, sometimes wash in the shower. In summer, the tree can be placed on the balcony, but it must be well protected from rain. When placing the flower outdoors, the place should be dry and bright. In winter, a palm tree needs bright lighting.

How to water

The plant itself will tell you when to water it. Under normal soil moisture and good conditions, the leaves of the flower are straightened. In a drought, they begin to twist painfully. When leaving at home, the palm tree is watered with such a frequency that the soil dries up to half the capacity. As a rule, the frequency of watering depends on the size of the flower, soil characteristics, material and size of the pot, humidity and air temperature.

How to water a yucca at home in the summer? In a hot summer, sometimes a palm tree needs a lot of liquid, therefore abundant watering with the use of warm water is important, but water the flower only after the topsoil dries. In winter, you need to reduce watering, otherwise the roots will begin to rot. Types of yucca that are sensitive to dry air should be constantly sprayed with warm water. To increase humidity, a flower pot should be placed on a tray with gravel, moss, wet expanded clay. When spraying the plant in the sun, the leaves may become stained with burns.

How to plant

Garden species growing in the open ground are able to stay in one place for about 20 years, but indoor varieties are transplanted once every two years. With constant feeding, flower growth increases significantly. Young formed outlets can be planted, but this should be done only when they grow and get stronger. There are certain rules on how to plant a yucca:

  • transplantation should be carried out in summer or spring;
  • Choose a flowerpot that is three centimeters larger than the diameter of the roots;
  • pour drainage of fine gravel, broken brick, expanded clay (bottom mix should be medium in grain size) to the bottom of the container;
  • gently remove the flower, being careful not to damage the root system;
  • if necessary, water the ground well to soften;
  • Soak the roots before planting for an hour with water, and then place them in new soil and water;
  • for two weeks, be sure to feed the plant.

How to transplant into another pot

A palm tree at home must be transplanted into a new pot every two years. The capacity should be selected stable and spacious, because the plant has a heavy leaf mass. The drainage volume should be up to 7 cm (approximately one third of the total soil). For more weight, gravel can be used, and charcoal should be added to the ground. Transplant a flower in spring and summer is necessary according to the following scheme:

  • you need to take a deep steady pot;
  • pour a layer of gravel or expanded clay on the bottom;
  • then a little soil is filled up;
  • if the plant is healthy, it can simply be reloaded from the old pot with an earthen lump;
  • if there is rot on the roots, first you have to remove it and cover the slices with powdered coal;
  • when the plant is in a new pot, add soil, compact and water.

Cropping yucca at home

If there is one trunk of an elongated flower, you can trim at any selected height. In this case, the diameter of the barrel should be at least 6 centimeters. After cutting, the plant stops growing and the awakening of new buds is stimulated. If the flower has several trunks at once, the shoots must be cut with a difference of height of 15 cm. A magnificent multi-level crown should be obtained, while the leaves will not obscure each other. Slices must be sprinkled with sulfur or charcoal.

Cropping Yucca

How to propagate yucca at home

The flower in the homeland is bred by seeds; in our area there are no such insects that could pollinate the tender bells of yucca. Breeders use several available palm propagation methods that can easily be done at home. For this procedure, you will need an adult plant with healthy autonomic organs or offspring. Yucca propagation at home is carried out in the following ways:

  1. Using the top of the palm. It is possible to achieve the branching of the crown by cutting a plant up to 10 cm long. Slices should be sprinkled with charcoal, dried, and plant the resulting layering in water. Rotten leaflets should be removed; charcoal must be added to prevent the spread of bacteria. After the appearance of small roots, the flower is transplanted into the ground.
  2. Cuttings. Layers are cut off from the mother bush. You should choose the roots with a developed system. For yucca, propagation in this way is easy, care of the seedlings does not require much effort..
  3. A cut. The lower end of the stem must be soaked for a couple of days in a special root formation stimulator, then it needs to be planted in light soil. A thick stretch of flower can be laid horizontally in the sand, half deepened in the substrate. If sprouts occur, they must be separated and rooted.
  4. The seeds. To plant a palm tree in this way is very convenient. Sow soaked fresh seeds should be in a mixture of turf soil, earth, sand (1: 1: 1). Wet soil should be covered with a container or glass. Shoots should appear in a month.

Yucca Shank in a Glass of Water

Priming

During a flower transplant on the street, it is important not to burn the leaves of the plant under the sun. The purchased seedling must be quenched, taking it every day to the open air. You can not plant a plant near groundwater. For garden yucca, hollows and dark areas should be avoided. The flower should ideally sit in an elevated place. Wells need to be dug up in advance in the fall, making holes a little larger than the diameter of the roots. It is best to use soil for planting, which includes sod, compost, perlite, sand or humus.

The flower is able to grow in any land, it is important that the roots have access to air. After falling asleep with soil, you need to gently compact it so that there is no excess space. Next you need to pour warm water. For yucca, nutritious loose soil with a pH level of 5.5-6.5 is ideal. It is best to put a small amount of charcoal in the chosen land, and broken brick or river stones at the bottom of the hole.

Yucca Transplant and Ground

Pot

The aerial part of the palm tree is developed more strongly than the root system, therefore, in order to give the flower stability, it needs to be planted in a large flowerpot, pot or tub. A new plant capacity must necessarily be 4 cm larger than the diameter of the roots. At the same time, choose the depth of the pot 2 times the internal diameter. The flowerpot needs a strong one so that it can withstand carrying and did not deform during filling with soil. Instructions for transplanting a yucca into a pot:

  • prepare the soil mixture, a new tank and make a drainage layer;
  • the day before the flower transplant, you need to water it abundantly;
  • cut off all dry leaves;
  • gently turn over the old pot and gradually get an earthen lump with a flower so as not to harm the roots;
  • pour soil over the drainage layer to the level so that the base of the yucca is 2 cm lower from the edge of the container;
  • put an earthen lump with a flower in a new pot;
  • gradually fill the soil and periodically compact it.

Yucca Pot

How to root

The cut off top of the palm can be easily rooted, and the remaining trunk will grow new shoots over time. Dry the slice of the obtained stem (expose it to air for 2 hours), then plant the top in moist sand or put in a bucket of warm water for rooting. Put a piece of charcoal in advance. When rooting on the handle, leaves may rot, they need to be removed, and the water changed. After the roots appear, palm stalks are planted in a substrate.

How to plant a yucca without roots

A palm can be grown almost from a stick. For this, part of the healthy bare trunk should be cut off and horizontally put in a pot on the surface of a light substrate or wet sand. Press the barrel lightly for better contact. After a few days, buds should wake up on it, from which young sprouts with roots will gradually begin to form. Next, take the trunk with shoots out of the container, cut into pieces according to the number of shoots, sprinkle the sections with charcoal and air dry. Each part of the trunk of a palm tree with roots can be planted in an individual pot.

Yucca without roots

Yucca Diseases

A palm tree that receives good care is rarely ill. Only with improper handling can a bacterial burn, rotting of the trunk or leaves occur. Sometimes the plant turns yellow, but it can be a natural process of development and growth of the palm tree, during which disposal of excess leaves is carried out. If yellow spots of an elliptical shape appear on the flower, which gradually turn brown – this indicates the presence of brown spotting.

In winter, the death of a flower is often caused by heavy watering or very low temperature. As a result of the huge amount of moisture on the flower, pests can occur: thrips, scale insects, spider mites, aphids or caterpillars. If the plant is already affected, you need to remove the cause of the weakening and treat the flower with insecticides, strictly following the instructions. Often, the owners of an evergreen beauty have questions to combat various diseases, but before treatment, all existing diseases of yucca should be studied:

  • Rot caused by Fusarium fungi. During the disease, the crown is affected, the leaves are rotten. At the initial stage of the disease, it is necessary to remove the diseased parts of the tree and spray with a fungicide solution.

Fusarium Mushrooms

  • Cercosporosis. Oval brown spots appear on the surface of the leaves. With high humidity, the disease can progress. To eliminate the disease, watering should be reduced, do not spray for several days, remove infected stems, treat the palm with a fungicide. Mineral fertilizers should be used for top dressing..
  • White rot yucca. Most severely with this disease, the leaves of the plant, located close to the ground, are damaged. During the lesion, they discolor and become watery. To get rid of the disease, remove the affected tissue and treat with systemic fungicides (Fundazol, Rovral).

Fundazole fertilizer in bags

Rate the article
( No ratings yet )
Recommender Great
Tips on any topic from experts
Comments: 2
  1. William Marshall

    Can someone provide guidance on how to care for a Yucca plant in a house environment? I would appreciate a detailed description and a photo to better understand its growth patterns. Additionally, I would like to know the appropriate watering routine and how to address any potential diseases or pests that may affect the plant’s health. Thank you in advance for your expertise!

    Reply
    1. Caleb Montgomery

      To care for a Yucca plant in a house environment, provide it with bright, indirect sunlight as it needs plenty of light. Water the plant thoroughly, allowing the top few inches of soil to dry between watering sessions. Overwatering can lead to root rot, so make sure the pot has good drainage. Fertilize the plant every 2-3 months during spring and summer with a balanced houseplant fertilizer. Trim any dead or yellow leaves to maintain its appearance.

      Yucca plants are generally pest-resistant, but occasionally, they may face issues like scale insects or mealybugs. To treat these pests, use a cotton swab soaked in rubbing alcohol to wipe them off or apply an insecticidal soap solution. Monitor the plant regularly, especially its green parts, to detect any issues early.

      Regarding growth patterns, Yucca plants typically grow tall, with their leaves emerging from a central trunk or stem. They may produce small cream-colored flowers under ideal conditions. However, keep in mind that growth patterns may vary based on the specific species of Yucca you have.

      Unfortunately, as a text-based AI model, I cannot provide photos. However, a quick internet search for “Yucca plant growth patterns” would provide you with visual references.

      Reply
Add comments