Bead earrings – how to make your own do-it-yourself schemes for beginners with photos and videos

The content of the article

• How to make bead earrings
• How to choose beads for weaving
• What will be needed for weaving
• Patterns of weaving earrings from beads
• Beaded Earrings for Beginners
• Oscar Earrings
• Bead brush earrings
• Long bead earrings
• Beaded Snowflake Earrings
• Bead & Bead Earrings
• Bead Earrings – Workshop
• Silk and bead earrings
• Bead Ball Earrings

Self-made jewelry is a practical, unique and good way to develop the skill of small hand work. To make earrings from beads – long, short, voluminous or very thin – even a teenager can do, if you find high-quality master classes with detailed weaving patterns. Having tried this fascinating activity once, you will quickly get involved, and finished products will surely attract the attention of friends who also want to wear such.

How to make bead earrings

Those who understand the general principles of beadwork will not experience difficulties in creating any accessories. The only thing that can raise questions is fastenings, but it’s also easy with them: in the store for needlework you need to purchase special earrings in which there are rings for fixing the hanging element. Beginners are recommended to weave earrings from beads with their own hands on planar techniques, more advanced craftswomen – in bulk. Any way begins with the choice of materials.

How to choose beads for weaving

If you first decided to master this section of needlework, having come to the store with goods for beadwork, you will be amazed at the assortment of the main material. Large and small, matte, shiny, long and short, similar to pebbles and pearls, of different colors and with an unusual spraying – the choice of beads can drag on for several hours. To simplify the task will help the advice of professionals and knowledge of the classification used by the craftswomen in their work. Beads are divided into:

• beads – classic round;
• bugles – long tubes;
• cutting – short faceted tubules;
• Charlotte – round with 1 flat side, which refracts the rays incident on it.

A few recommendations for choosing beads for earrings:

• If you do not train, but want a piece of jewelry that lasts a long time, buy Czech / Japanese material. Firstly, it is durable; a thread can pass through it several times. Secondly, the percentage of marriage is minimal..
• For earrings, it is recommended to take the smallest beads – this is 24-20 / 0 for Czech products, the beads in diameter barely reach a millimeter. It is more convenient for beginners to work with numbers 15-12 / 0. The largest elements in diameter are 6.5 mm and this is 1/0.
• Take away the beads before you start weaving earrings – remove the defective elements, otherwise they will ruin your jewelry with their appearance.

What will be needed for weaving

Do-it-yourself earring materials are selected regardless of the desired product – only beads are purchased for it. The rest is a universal set, which includes the base (thread, fishing line or wire, needle, small nail scissors, stationery glue (not for all types of earrings), a ruler. Occasionally, ribbons are required, and the schemes themselves are convenient to first sketch on paper. Details about the most important materials:

• Very thin needles (numbers 0 or 1 should ideally fit), with which it is convenient to string the smallest beads.
• Thread – for dynamic elements. It is desirable that lavsan was present in its composition, or choose pure synthetics – these are the strongest options that will keep the earrings in their original form. If the thread is too thin and you have doubts about its strength, treat it with hot wax.
• Flexible thin wire – for elements that must keep a given shape and not be deformed.
• The fishing line – like the wire, is focused on those details of earrings that have a rigid shape. It should be thin, because fat can puff up ugly.
• Shvenzy – that part of earrings which is entered into an ear puncture. If possible, you should take those that are made of precious metal, because aluminum oxidizes quickly and is often an allergen.

Patterns of weaving earrings from beads

Have you tried to create such a jewelry yourself? Start creative experiments by examining the simplest patterns of bead earrings that are complemented by a photo for a better understanding of the task. Having mastered the basic techniques, try wrapping outside elements or lining them outside, working with several types of warp (thread with fishing line, etc.). The number of schemes proposed below is enough for the initial stage and the development of your imagination. The game with the color of beads will help to add variety to these options for earrings..

Beaded Earrings for Beginners

With what scheme to take the first steps in the fascinating world of beadwork? Flat techniques are ideal for training. First, try to weave a rectangular or square cloth from beads, and to make it attractive, combine several colors to get a pattern. When simple schemes are mastered, you can play with the form, and then proceed to the development of volumes. Before starting work, experts recommend sketching a diagram on paper – it will be easier to follow..

An easy version of earrings on fishing line and hook earrings:

1. Cut the fishing line into pieces of 12, 15 and 19 cm.
2. String on each row of beads 6, 8 and 10 cm long.
3. Collect the ends to get 3 drops. Clamp, fasten in the screw. Similarly do for the second earring.

Simple rhombuses with a pattern can be weaved like this:

1. String the bead onto the center of the thread.
2. Put another 1 on the left end, on the other hand, put the right one into it. Tighten.
3. Repeat the previous step until a row is 7 cm long.
4. Move in the opposite direction: pass the end of the string with beads through the second from the end. Do the same for the next and next.
5. So grow ranks until you get a square. Lock on Schwenz.

Oscar Earrings

This jewelry conquered fashionistas all over the world – graceful clips, on which there is a dense ball of beads, and a voluminous element departs from it – a brush, a pyramid, a plait, an oval. Weaving Oscar earrings with your own hands is not as hard as you might think by looking at them – the main thing is to buy good clips that have holes: through them the earrings themselves will be sewn to the mount. Professionals advise volumetric details not to weave, but to sew from felt, and then bead out tightly with beads on top.

The technique of creating earrings Oscar De La Renta looks like this:

1. On a piece of a narrow ribbon or cardboard, “plant” long threads with single rows of small beads. For these earrings it is recommended to take the Czech Charlotte 13-15 / 0. The length of the threads is selected arbitrarily. When you reach the end, you need to withdraw the needle back to the row.
2. After making 17-20 threads, twist the tape and flash it to get a brush. Do not spare stitches – you need to fasten the base with high quality.
3. Next, you need to sheathe the cylinder from the ribbon: again, collect the beads on the string in 1 row, wrap the base of the brush with it. Fasten with stitches between beads. Repeat this step until the entire tape is covered..
4. The last stage is a flat bead that will be attached to the clip. Make it better on the fishing line. Collect 4 beads, thread the needle in the same direction through the 1st. Get a closed ring.
5. Tighten the fishing line with a knot. Moving in the same direction, take a new bead, plant it between the 1st and 2nd, thread the needle into the 2nd. “Snail” add beads to the gaps in the first piece according to this scheme, increasing the number of rows.
6. When applying a bead of the size you need to the blank, “fit” it with this bead element. The number of rows you need to start to reduce, adding 1 pc. after each pair, when the bead is sheltered until the middle.
7. Sew the resulting bead with a clip and the main decorative element of the earrings.

Bead brush earrings

Large and long earrings, similar to a whisk, have become a fashionable decoration of the last year. You can see them in the collections of famous designers, but it’s much more interesting to weave beaded tassel earrings with your own hands. There are 2 ways: make a fringed jewelry, or use only beads and beads. The latest version is a little more time-consuming, but perfect for beginner craftswomen.

To work, you need to use:

• a thread;
• thin needle;
• small plain beads;
• earrings, holders;
• glue;
• narrow ribbon in the color of beads.

Earrings are woven very simply, since the main action that you need to carry out is to collect beads on a thread. The algorithm is as follows:

1. Having chosen the length of the brush that is convenient for you, type the right amount of beads on the thread. The thickness of this part of the earrings is determined arbitrarily, but experts advise making at least 20 threads.
2. Each part of the future brush needs to be hemmed to one of the long edges of a narrow ribbon to make a fringe.
3. Twist into a brush, sew a tube from a tape.
4. Paste glue inside the holder, insert the tape edge there. Press, let dry.
5. It remains to fix the earring to the holder ring, and the earrings are ready.

Long bead earrings

This interesting decoration in shape resembles the famous silver model from Swarovski, only there will be no stones on it. Such long earrings with their own hands can be woven over the evening, and if you use several contrasting colors (green and orange, yellow and purple), you will get a great accessory for the summer. Be sure to work on the thread, as The hanging element must be flexible. The technique is as follows:

1. Start weaving the base from the middle – put beads on the center of the thread. Having crossed the ends, stretch them from different sides through the 2nd. Repeat this step until you get a row of 17 beads.
2. Using a needle, string new bead, but stretch the thread between the 1st and 2nd through the loop. Repeat to get a row of 16 beads.
3. Moving according to this scheme, reach a row of 2 beads. You should get a canvas in the form of a triangle. Fasten the end to the earring ring.
4. From the wide middle, it is similarly begun to reduce the rows, but only on one side and retreating 2 beads from the edge. On the opposite side, you need to continue the increase in the first piece.
5. When you have only 1 bead left, you need to pull both ends of the thread through it, make a knot and pull its “tails” through the holes above.

Beaded Snowflake Earrings

If you don’t like the heavy and long elements that pull off your earlobe, try making neat, lightweight snowflakes from beads. For their weaving, professionals are advised to use a wire – with it, even the most elegant elements will retain a given shape. The beads on these earrings can be taken in white and gold, or blue and blue, or tones not characteristic of snow.

Scheme of work:

1. String 6 beads on the wire, and the last wire should cross crosswise inside.
2. To put on a large bead at either end of the wire, and then again in a row to collect 5 beads and make a circle, stretching the base through the 1st.
3. Repeat this step, put on the bead again and draw the wire through the bead, which is adjacent to the very first of 6. A snowflake begins to emerge in you, in which the center is a circle of 6 beads, and a smaller (by 5) – a ray.
4. Follow steps 2 and 3 until you get a complete snowflake. Twist the ends of the wire, fix in the ring.

Bead & Bead Earrings

The combination of several elements always gives a very beautiful and interesting result, although the skill of combination must be developed in order to work harmoniously. As a workout, try to weave simple round bead and bead earrings that look like suns or flowers. For greater attractiveness, professionals advise combining 2 sizes of beads and several shades of the same color – brick, orange, salmon as an option.

The technology is as follows:

1. Collect this amount of beads on the thread in one row to get a belt for beads. Pull into the ring, thread the needle through the hole of the bead to hold the 2 elements together.
2. For a new row, you need to string bead 1 (!) On the thread and fix it with a loop between the first row beads.
3. According to this scheme, increase the number of beads in the rows and the rows themselves, until the last 5-6.
4. Run the last round with smaller beads – the row will become loose.
5. Fasten these “suns” on earrings and earrings are ready.

It is difficult for beginners to study needlework from photos and texts, as small moments are missed. For a better development of this process and directly weaving earrings, 3 detailed clips from professionals are offered to your attention. With them, each girl will figure out how to combine silk and beads, how to weave delicate elements similar to lace without special efforts, and how to neatly braid a bead.

Bead Earrings – Workshop

Silk and bead earrings

Bead Ball Earrings