DIY satin ribbon flowers

The content of the article

• How to make flowers from ribbons with your own hands
• DIY satin ribbon flowers for rim
• How to make flowers from ribbons – roses
• How to make a flower from a ribbon using the kanzashi technique – daisy
• Do-it-yourself lush flower made of satin ribbon – peony
• Wedding bouquet of satin ribbons for the bride
• Video Tutorials: DIY Satin Flowers for Beginners
• Poppy
• Aster
• Sakura
• Calla lilies
• cornflower
• Chamomile
• Sunflower

What can be more unique than a jewelry made by your own hands. With satin ribbons, exclusive items for decoration are performed. To create flowers is within the power of any novice craftswoman, and if you practice, you will get masterpieces. Learn how to decorate clothes in an original way, a gift.

How to make flowers from ribbons with your own hands

There are different methods for assembling flowers from satin ribbons. Perseverance will be required, but the results will be admirable. Start with simple things, then turn on the fantasy and create unique jewelry. To make flowers from satin ribbons with your own hands, you will need:

• lighter or candle;
• sharp scissors;
• needle with thread;
• glue gun;
• tweezers.

DIY satin ribbon flowers for rim

Try decorating the bezel using oriental kanzashi technique. Experiment with colors, the number of buds and petals. The creation technology will not cause difficulties, but if in doubt, watch the master class: the video is below. To create a flower with five petals, you need 5 pieces of 5×5 cm. You need to take the same number of circles with a diameter of 15 mm, burned around the perimeter. Make a bezel as in the photo:

We create flowers from ribbons with our own hands as follows:

• fold the piece at an angle three times;
• perform a fold;
• cut the end;
• we burn, we fix;
• cut the lower end of the petal;
• we burn, fix with your fingers;
• create all 5 petals in the same way;
• we sew the petals into an inflorescence;
• glue a circle of fabric on the back;
• fasten to the rim;
• decorate.

How to make flowers from ribbons – roses

Making flowers from satin ribbons with your own hands is a fascinating needlework. The original rose, as in the photo, can decorate the hairstyle, dress. They make it in different ways, we offer one of them. If not everything is clear – watch the video. For manufacturing, you need a tape measuring 25 mm. It is necessary to cut 8 pieces of 7 and 5 centimeters long, burn the ends.

Start work like this:

• perform 4 petals from a 5 cm blank;
• bend one end at an angle of 45;
• the bent edge is heated with the base, fixed with tweezers;
• repeat on the other hand.

How do the middle and outer petals, leaves:

• 4 workpieces of 5 cm are also bent in two directions, but they should be sewn with threads, making a seam with a small assembly;
• using the same technology, 8 outer petals are made from pieces of 7 cm in size;
• leaves are cut from a green blank 2.5×5 cm;
• burn around the perimeter, making bends;
• make veins by bending a leaf, heat, compress hot.

Assemble the finished product in the following sequence:

• gently twist the first workpiece with a tube, fix it with glue;
• sequentially glue around the next 3 blanks – this is the middle of the bud;
• fix the middle and outer petals, distributing them around the perimeter, forming a blossomed bud;
• it remains to stick the leaves, fasten the pin.

How to make a flower from a ribbon using the kanzashi technique – daisy

Decorations will be beautiful and elegant – flowers from satin ribbons with their own hands. To create such a spectacular daisy, as in the photo, you will need to make 40 small blanks.

If you have questions about technology, watch the video. The craft can be used as a hairpin or elegant brooch. For manufacturing you will need:

• 1.2 m white tape 12 mm wide;
• green, yellow – 6 mm wide – 0.3 m each;
• 2 pieces of white felt, in shape – a circle with a diameter of 20 mm;
• barrette.

Start making an artificial chamomile like this:

• 40 white blanks of 3 cm are cut;
• corners are cut from one edge;
• fused with a lighter, making a fillet rounding;
• the bottom is folded with an overlap, the front side inward, melted;
• on a blank of felt, draw a circle 5 mm from the edge;
• the petals are glued around the mark, in a circle;
• they are staggered around the inner circumference.

To create your own stamens, you will need a needle with a wide eye, a narrow yellow ribbon. Do in this order:

• a needle with a ribbon is stuck from below into the center of the flower;
• pull out at the top;
• wrap the tape around the needle for one revolution, stick it down, fixing the loop;
• repeat the operation in a circle from the center to the edges, until weaving closes the inner surface;
• for leaves, cut the green blank into 3 parts, fold it in half, clamp the fold;
• the ends are crossed, fixed by fire;
• glued from below to a camomile;
• insert a hairpin in the second circle of felt;
• stick to flower.

Do-it-yourself lush flower made of satin ribbon – peony

Ribbon flowers for beginners can be learned to make with the example of a peony. It will look like in the photo. You can decorate with a peony hairstyle or elegant dress. Make one large flower according to the proposed technology, if necessary, refer to the video tutorial to clarify all the details. For the manufacture you need satin blanks of 25 mm.

Need strips:

• yellow – 1.4 m – 22 strips 6 cm long are cut;
• pink – 1.3 m – make 27 blanks of 4.5 cm each;
• maroon – 3.2 m – cut off 18 strips 6 cm long and 38 – 5.5 cm each.

They make a peony using this technology:

• cut off the end of the yellow workpiece at a slight angle;
• burn both sides;
• screw on tweezers, fixing with glue;
• carefully removed – it turns a stamen;
• take pink stripes, cut a semicircle (you can use a pattern from paper);
• heat the edge with fire – it is better to use a candle, make a wavy surface with your nails;
• the bottom is folded, fixed by heating;
• on burgundy blanks round the edge;
• hold over the fire – it will bend outward – the front side is on top;
• fold from below, fixing with fire.

Assembly is carried out as follows:

• collect stamens in 3 rows, fixing with glue;
• glue pink petals, face inward – in 3 layers;
• stack short burgundy blanks inside out, fixed with glue;
• the last row is made of long petals, the glossy side is on the outside;
• framed by green leaves.

Wedding bouquet of satin ribbons for the bride

It looks very beautiful and a bouquet decorated with your own hands will remain in memory of the wedding. Decorating using brooches, beads, lace, as in the photo, was originally conceived. To make a bouquet, you first need to make 19 roses, from ribbons of white and purple, as, for example, in a video lesson that you can watch for a better perception.

To decorate the decoration, you must have:

• foam ball blank with handle;
• lace;
• thin lilac satin ribbon;
• wide – white, purple;
• decoration elements – beads, brooches.

In addition to the bouquet, using this technology you can make a topiary – a tree of happiness. Assembly is carried out as follows:

• the handle is wrapped in white;
• lace is fixed on the ball, fixed near the handle;
• in the lower part glued doubled thin lilac strips – 12 pieces;
• lace – the next row;
• further folded strips of white and purple ribbons;
• roses are firmly glued to the surface of the ball;
• the bouquet is decorated with decor.

Video Tutorials: DIY Satin Flowers for Beginners

It is very exciting to make flowers from a satin ribbon with your own hands. Having mastered the method of manufacturing different elements of a bouquet using video tutorials, you can create exclusive things to decorate your clothes. Using simple technology and a simple set of tools, make your own unique flowers for gifts in the form of a topiary – a tree of happiness, brooches or hairpins.

Poppy

Aster

Sakura

Calla lilies

cornflower

Chamomile

Sunflower