...

How to get on the knitting needles loops for beginners

This WordPress post is a comprehensive guide for beginners on how to get started with knitting. It provides extensive information on the essentials of knitting, which include the types of yarn and needles, reading knitting patterns, and understanding the commonly used knitting terms and abbreviations. It also covers different techniques that beginners can use to cast on and cast off their stitches, as well as essential tips to start, finish and block patterns. It is an ideal start to developing the basics of knitting and understanding the many techniques used in knitting.

The content of the article



Any work on knitting begins with a set of loops – this is an axiom. Beginning needlewomen are recommended to do it on two knitting needles so that there is a gap, and it is easier to master the process. There are several ways to knit stitches. For those who have only recently become addicted to needlework, it is worthwhile to start to learn the simplest universal method that is easy to use for any product. But the edge edge performs different functions – it can be imperceptible, elastic or, like an elastic band, dense, tightening. It depends on the first row dialing method..

Step-by-step instructions for knitting stitches for knitting needles for beginners

For any knitting, it is very important to learn the correct setting of the hands, then the dialed loops will be evenly tightened, and the convenient location of the fingers will help to do everything quickly. The elbows should be slightly bent during operation, not in contact with any surface. Index fingers are involved more than others. Put a ball with yarn (wool, mohair) in front of you so that the thread is free. To knit a certain thing, select the type of hem that will match the pattern.

How to learn to type the first loop of the initial row

First loop first row

  • Unwind the desired length of thread from the ball (about 10 cm for every 10 loops) and place three fingers on the left hand from the little finger to the middle.
  • Thread a thread around the index bottom.
  • Stretch the yarn to the thumb, wrap it from bottom to top, making a loop.
  • Middle, nameless and little finger hold the thread, pressing it to the palm of your hand.
  • Take two knitting needles with your right hand, pick up the loop on the thumb from the bottom, thread and hook the yarn on the index.
  • Stretch and make a loop, which will be the beginning of the edge row.
  • The remaining loops of the desired number are dialed in the same order..

Single-spoke stitch method

  • Use only one knitting needle. Fasten the knot of yarn.

Single-spoke air loops

  • Wrap the thread around the index finger clockwise or counterclockwise. Loops will turn out front or wrong. Use this or that method, depending on how the second row will be knitted.
  • Insert the needle into the eyelet, remove it by tightening it on the worker. Further according to the same scheme.

Look at the video for several different types of looping..

Additional loops

For most products, simply knitting an even cloth is not the limit of the possible; when expanding the cloth, the number of loops should be added. Having connected the required number of rows according to the scheme, you need to proceed with the additional set of additional loops, which should be arranged evenly, for example, every third or fourth. As a result, you can easily get a triangular detail of a future product.

A set of additional loops

  • The first loop is removed.
  • The second is knitted face.
  • An extra loop is obtained by crocheting. The next is facial.
  • After a certain number of facial loops, depending on how much the initial amount is scored and how much to add, we repeat this operation with a crochet.
  • So that in the place where the yarn was made, holes do not form, in the next row, which is knitted on the wrong side, you need to knit the thread through the back wall.
  • Edges are removed without tying.

Cross-shaped looping method

To start a set of loops in a cruciform way, you need to measure the yarn, which will exceed the length of the thing three times, from this point start work.

Cruciform hinge set

  • With our hands we create a loop, stretching through a thread, we put on knitting needles.
  • The yarn should wrap around the index and thumb, as in the classical method. Knit, tighten by removing the thread from the thumb.
  • The next loop from the thumb is grabbed from the bottom and knitted, from it the yarn is grabbed from top to bottom and tightened.
  • A new stage – tightening the loop from the bottom up.
  • Alternating loops by pulling on top or bottom gives a cruciform pattern. Visual aid provided in the video.

Italian way to knit elastic

This method is used to knit gum 1×1 or 2×2. Use a single knitting needle to get a denser, tightened edge during operation..

  • Having unwound the required amount from the ball, the free end of the thread should be put on the fingers of the left hand (middle, nameless, little finger), squeezed between the index and middle.

Italian loop set

  • Pull the thread to the thumb and twist it clockwise, as the video tutorial shows.
  • Insert the needle from the bottom up under the yarn on the thumb, hook the part that goes from the index, stretch it into the loop on the thumb.
  • Throw the eyelet off the thumb and gently tighten it.
  • Following the instructions, as shown in the master class, dial, alternating front and back loops. The number of loops must be even and additionally two hem.
  • Flip over. The first edge is not knitted, it must be removed.
  • Front knit behind the back wall.
  • Remove the wrong side without tying. Keep yarn in front.
  • If the elastic is 1×1, then the alternation of loops through one, if 2×2, then through two.
  • The pattern is repeated: knit the front, purl the back, holding the yarn in front.
  • The last hem knit.
  • Turn over, remove the first edge, leaving it open. Front knit, purl to remove, so that the thread is in front.
  • Starting from the third row, the front ones are knitted, like the front ones, the wrong ones – the wrong ones.

On circular knitting needles

Circular knitting needles do not always have a long fishing line, and the number of loops sometimes must be large. An extra straight knitting needle of the same diameter as those to which the fishing line is attached can come to the rescue..

Circular knitting stitches

  • By connecting together a straight and one of the circular knitting needles, you need to start making a set of loops in a way convenient for you.
  • Shifting the typed loops, their shift goes to a circular fishing line.
  • If you plan to knit a large size, and the length of the knitting needle does not allow you to dial further in quantity, you can use a little trick: pull out the additional line, push the finished loops onto the fishing line, insert again, but in the last few loops.
  • Continue convenient dialing further to the desired amount.
  • Add one additional loop, which will become a link for the two extreme edges.

Experienced craftswomen know that the appearance of the product depends on how the loops of the first row are typed. A correct knitting sample will help you calculate the correct number of loops to be drawn, with which it will be easy to determine how many loops in this figure you need in one centimeter. The existence of several dialing methods gives a great chance to choose the right option that is suitable only for such a product.

How to put loops on the knitting needles to get an elastic beautiful elastic band that will not stretch and keep its original shape – find out from the video. This method will come in handy if you decide to knit a scarf-snood, gloves, mittens, socks. The difference in the beginning of work for these products will not be in the method of recruitment, but in what spokes and how were used. Circular with a fishing line are suitable for a scarf, and mittens, socks are knitted with the help of four and a fifth additional. You can learn more from the video tutorials how to knit a scarf yoke.

Circular knitting needles and specific work on them will help to knit sweaters with a neck, including a collar-collar, a pelerine. Using two knitting needles at the same time when working with eyelets makes the edge thickened, embossed. There are types of sets that add variety to the pattern, starting with the first row of knitting. Some products are knitted for details, and then crocheted together into a single whole. This applies to the poncho, in which the seam is in the middle of the product, plaids, sweaters with raglan sleeves, some models of caps.

Drawings “pigtail”, “putanka”, “tourniquet”, “herringbone” will turn out more elegant if the set of loops is drawn with a tightened edge. A few informative videos presented to your attention will once again help you understand how to correctly knit stitches for different types of knitting, which are useful if you want to knit socks, warm tracks, a sweater with a front bar or a scarf. Mastery comes with experience, all needlewomen were once beginners. Your desire to knit yourself will certainly be rewarded with the resulting beautiful thing.

Three ways to set loops on two knitting needles at once

On 4 and 5 knitting needles for knitting socks or gloves

To scarf snood

How to calculate the number of loops when knitting a sweater

How to draw loops on knitting needles for hats in a classic way

Rate the article
( No ratings yet )
Recommender Great
Tips on any topic from experts
Comments: 2
  1. Oakley

    As a beginner, I’m curious to know how I can get started with knitting needles and create loops. What are the basic steps and techniques to follow in order to succeed in knitting? Any tips or recommendations for a beginner like me?

    Reply
  2. Isabella Walsh

    As a beginner in knitting, I’m curious to know the best way to get started with creating loops on knitting needles. What are some helpful tips or techniques for beginners to successfully get their loops onto the needles? Any recommended resources or tutorials to help me get started? Thank you in advance for your assistance!

    Reply
Add comments