...

How to glue a protective glass on a smartphone

This post explains how to glue a protective glass on a smartphone effectively. Since glass protectors are essential for preserving the screens of smartphones against scratches, dirt, and other damage, the post highlights the benefits of using the right method to attach the glass. It outlines the key steps needed to properly affix the glass, including cleaning the adhesive surface and checking the entire surface for dust and debris, and notes the importance of using an appropriate adhesive, such as high-quality UV glue. It also presents tips on how to remove the old adhesive before applying the new one, and defines the steps to press the glass onto the smartphone evenly and firmly. All these components ensure that the protective glass is perfectly bonded to the smartphone, granting optimal protection and shape stability.

The content of the article



The screen of any communication gadget needs protection. Even if you purchased the latest iPhone model, do not neglect the ability to install additional film on the display. This will extend the life of the phone, allow it to look attractive for longer. Such mechanical damage as scratches, bumps will not be scary if you know how to stick a protective glass on the phone. The task is not an easy one, but if you follow the instructions, you can do it at home without outside help.

How to stick a protective glass on a smartphone

For a beginner, the procedure may seem complicated, but a few workouts will make you a real specialist. It is worth noting that there is no significant difference in whether we glue the protective glass on iPhone 5, other phone models or a tablet. The procedure remains the same. An inexperienced person is better to start from the back of the gadget, and then go to the screen.

Screen for damage protection

Necessary materials and tools

If you just purchased a smartphone, it is important to understand how to stick protective glasses on the phone. The display of the device is very sensitive to mechanical damage. Being simply in your pocket, the gadget will be damaged by coins, a fingernail or keys. Even minor scratches can cause bubbles to appear during gluing. The same goes for situations where you just want to replace your old phone protection.

For the procedure you will need:

  • alcohol wipe;
  • dry cloth;
  • special liquid for cleaning TV screens or computers;
  • scotch tape or dust bag;
  • glass.

Peeling film

Step-by-step instruction

An important point is the preparation of the workplace. Choose a room with a minimum dust content. A kitchen or bathroom is best. There is too much textile in the bedroom that attracts particles. This point prevents the correct process and can complicate the procedure. If you do not know how to glue the protective glass on the phone, follow the steps:

  1. Wash your hands with soap, then lay the equipment, protective glass for 6 iPhones or another phone on a clean smooth surface.
  2. Before starting the procedure, remove the old film from the device. To do this, pull the edge slightly at an angle of 60 degrees.
  3. Use an alcohol wipe or cleaning cloth to remove any dirt from the phone screen. Such a tool is sold in hardware stores or made independently. To do this, you need to mix 5: 1 water and alcohol, add a little gel for dishes.
  4. We rub the display to shine. If there are dust particles, then we pass along the surface with tape or a dust bag.
  5. We take the device out of the package and remove the film from it.
  6. We set the protection so that it matches the central button of the gadget and the speakers.
  7. Swipe down from center to bottom to secure surface.
  8. We expel the remaining air from the center to the edges using a credit card or spatula, which is often included.

Do not press too hard on the screen to remove small air bubbles. They will disappear on their own within a few days after the procedure. As a result, you should get a smooth, perfectly even screen coverage. Although the tempered glass on the phone has a thickness of only 0.18 mm, it perfectly protects the device from mechanical damage..

Ant alcohol

Is it possible to re-glue the protective glass on the phone

Quality surfaces for the iPhone 5s and other gadget models can be reused. To do this, carefully remove the glass and treat the adhesive side with formic alcohol. Wipe it gently with a cloth soaked in such a liquid and allow a little time to drain. Then set the protection according to the speaker and button. Lightly move the air and liquid from the center to the edges. Small bubbles will disappear themselves in a day.

The videos below will tell you how to equip the gadget’s display at home without the help of a specialist. You will learn how to stick protective glasses on phones or tablets. With such a coating, the screen will be reliably protected from negative influences, which will allow it to remain attractive for longer. Protection will protect the device from scratches, and also absorb shock when dropped. In this case, the sensitivity of the sensor of your phone will remain the same.

On iphone

On samsung

On Lenovo

Rate the article
( No ratings yet )
Recommender Great
Tips on any topic from experts
Comments: 3
  1. Piper

    If you’re looking to glue a protective glass on your smartphone, consider the following steps: 1) Clean the screen thoroughly with a microfiber cloth and remove any dust or fingerprints. 2) Align the glass perfectly with the screen edges and make sure it adheres properly. 3) Apply a small amount of adhesive around the edges of the glass, ensuring it won’t touch the screen itself. 4) Gently press the glass down and remove any air bubbles if necessary. 5) Let it dry as instructed by the adhesive manufacturer. However, my question for you is, have you ever tried applying a protective glass before? Any tips or suggestions?

    Reply
  2. Logan Palmer

    Could someone please explain the step-by-step process of properly gluing a protective glass onto a smartphone’s screen? I want to ensure I do it correctly to avoid any damage or air bubbles. Any tips and recommended adhesive products would be greatly appreciated as well. Thanks in advance!

    Reply
    1. Connor Turner

      To properly glue a protective glass onto a smartphone’s screen, follow these step-by-step instructions.
      1. Clean the screen: Start by wiping the screen with a microfiber cloth to remove any dust, fingerprints, or smudges.
      2. Position the glass: Align the protective glass over the smartphone’s screen. Ensure it matches the screen’s dimensions precisely.
      3. Remove the adhesive film: Peel off the protective film from the adhesive side of the glass.
      4. Apply adhesive: Either use the adhesive that comes with the glass or a recommended adhesive product. Apply a thin, even layer onto the adhesive side of the glass.
      5. Align and press: Carefully align the glass with the screen, ensuring it matches the edges precisely. Start by placing it on one side and then gradually lower it while pressing out any air bubbles.
      6. Smooth it out: Gently press on the glass, starting from the center and moving towards the edges. Use a soft cloth or a specialized tool to smooth out any remaining air bubbles.
      7. Let it settle: Allow the adhesive to settle as per the manufacturer’s instructions. This may involve leaving the phone undisturbed for a certain period.
      8. Check for bubbles: If any air bubbles remain, use a credit card or the provided tool to push them towards the edges. Be gentle to avoid damaging the glass.
      Remember to refer to the specific instructions provided by the manufacturer of the protective glass for optimal results.

      Reply
Add comments