How to hem jeans

The content of the article

• How to hem jeans on a typewriter
• A way to hem jeans while maintaining a factory seam
• How to shorten jeans without a sewing machine
• The price of a work on a set of jeans
• How to shorten jeans by hand
• An easy way to shorten your jeans while maintaining a seam

Among the many styles and sizes of trousers, it is difficult to find a model that would fit perfectly, suitable for size. Illiterate shortened things lose their attractiveness, look chopped off, and spoil the look. When hemming a product, it is better to keep a decorative stitch laid along the bottom edge of the legs.

How to hem jeans on a typewriter

Processing the lower edge is not difficult for a novice master, it allows you to save on the price of services in the studio. For this you need an ordinary sewing machine. Even a rare model left from my grandmother will do. The threads used for sewing must match the color of the fabric or decorative finishes. This material is better to pick up immediately after buying things. The thickness must be such that the machine can hem the product. It is not possible to imitate a factory line. To give a well-worn dumpling, you can rub the seams with a pumice stone.

Before hemming jeans, you should correctly measure the length in the finished form. Do the following:

1. Put on a thing.
2. Stand without shoes in front of a large mirror.
3. Tuck in excess, secure with pins or needles. The fold line should be near the heels at floor level. If shoes with heels, you can hem the product, leaving it longer.
4. Put on your shoes, check the result. If necessary, correct.

How to cut jeans and hem the bottom? Your actions:

1. Lay the product on a flat surface, aligning it lengthwise and crosswise.
2. Draw a line of final length using soap and a ruler.
3. Set aside 1 cm down. Draw the second line.
4. Measure another 1 cm down before cutting jeans. Draw the third line.
5. Trim both legs.
6. Turn the shortened thing inside out.
7. Fold along the first line, then along the second.
8. Pull by hand.
9. Get straight lines.

A way to hem jeans while maintaining a factory seam

Decorative stitching is an integral element of a thing. How to trim jeans for processing beautifully while maintaining the factory finish, saving on the price of the service? Procedure:

1. Determine the desired length.
2. Measure the width of the hem on the inside.
3. Lay out the thing.
4. Measure from the intended length upwards the width of the hem.
5. Draw a line parallel to the floor.
6. Set aside 1 cm.
7. Draw the second line.
8. Transfer measurements to another leg.
9. Cut the trousers in the second line.
10. Set aside 1 cm from the hem on fabricated parts.
11. Draw lines.
12. Cut the excess.

Hemming jeans while maintaining a seam is done like this:

1. Attach trim parts to the legs.
2. Equalize the slices, chop off the sides and inside.
3. Sweep parts with clips so that they do not move.
4. Stitch 1 mm from the factory seam, as in the photo.
5. Carve allowances in thick places 1-2 mm to the stitch.
6. Trim the bottom allowance to 3-5 mm.
7. Iron the edges to the hem if the fabric is thin. For dense material it is better to send allowances in different directions.
8. Stitch 1 mm from the factory seam..
9. Overcast allowances.

Learn how to make holes in jeans beautifully and neatly.

How to shorten jeans without a sewing machine

Processing the bottom edge of the trousers can be done manually. How to hem jeans? Procedure:

1. Lay out the thing.
2. Draw a chalk line of the finished length, focusing on the marks.
3. Set aside the width of the factory hem.
4. Draw the second line.
5. Turn the thing inside out, iron it.
6. Fold the bottom so that the decorative stitch and second line are aligned..
7. Hem the hem with neat stitches.
8. Cut off excess material left inside.
9. Overcast edges.

The price of a work on a set of jeans

Processing the bottom of the product can be inexpensively ordered in the studio. An argument in favor of professional hemming is the large thickness of the fabric. An ordinary machine may not be able to cope with such a task. The industrial equipment used by tailors in the atelier is intended for these operations. The cost of filing the bottom of the product depends on the complexity of the work. The price of the service is from 180 to 800 rubles.

Paying attention to watching video lessons, you will get a visual representation of the process of hemming the legs manually. You will learn how to save on the price of services in the studio and make the finished thing look neat, what are the ways to process allowances on the wrong side without using a sewing machine. After reviewing the master classes, you will see how to try on things, mark the desired length. The process of hemming clothes will become simple and clear for you..

How to shorten jeans by hand

An easy way to shorten your jeans while maintaining a seam