The content of the article
- Step-by-step instructions with diagrams and job descriptions
- Workshop on knitting socks with a straight heel
- Knitting socks with heel “Boomerang”
- The method of knitting a stepped heel at the toe
- Double viscous heel knitting
- Video tutorials for beginners on knitting a heel of a sock with knitting needles
- How to properly form a heel when knitting socks with knitting needles
- How to tie a heel on toes for children
With the advent of autumn and winter colds, thoughts about warm knitted socks more and more often arise. Buying such a product in a store is simple but tempting to do it yourself. Even having mastered the basic principle of knitting, often they are faced with the question of how to knit a heel of a sock. We are ready to offer you some of the most common options. Applying the experience of knitting other craftswomen in practice, you can in your free time try all kinds of knitting of such a part as the heel, thereby warming all family members in the winter with woolen cozy products.
Step-by-step instructions with diagrams and job descriptions
The heel in the toe is the place that is most susceptible to wear. To increase strength, add thin elastic acrylic thread or cotton thread for sewing No. 30 or No. 40 to the prepared woolen or half-woolen yarn (you can choose a different color that will only decorate the product). Increase the wear resistance of the heel – and the socks will delight you with their heat for much longer. The little girl is knitted with an elastic band so that it fits tightly.
Sometimes the elastic is made low, only on the cuff, and the pagolenki is decorated with a pattern in the form of braids or plaits. This style is well suited for women of any age. A bright mix of different colors looks beautiful on your feet, which you can easily create from the remains of yarn accumulated from previous works. This will be not only a budget savings, but also a pleasure, because any family member will be happy to wear such fun new clothes.
Workshop on knitting socks with a straight heel
To knit a straight classic heel, you will need 5 stocking needles, four of which form a square, and the fifth is a working one, on which a set of loops takes place. Having connected the booties with the cuff of the required length, proceed to the most difficult stage. Having mastered the skills of knitting in a straight line, it will be easier for you to learn how to work in other patterns.
- To knit the wall of the heel, with the help of knitting needles No. 1 and No. 4, you need to knit a cloth – the required number of rows is smooth with facial loops. They should be two less than the number of loops (the sum on the two knitting needles is 28, the rows should be 26).
- In order to properly tie the lower part, you need to calculate the number of loops, divide by a multiple of three. If the number n is divisible, then the middle part will be larger (11 + 12 + 11).
- The middle part is knitted with satin stitch: the front side – the front side, the wrong side – the wrong side. Side with each row should decrease, since the extreme loops are knitted together.
- The execution of the lower part is as follows: 1st — knits with the facial ones, in the middle part the last loop is knitted together with the crossed facial one, the work is unfurled; The 2nd wrong side begins with the fact that the extreme loop is removed as the wrong one, the middle is knitted with the wrong ones, the extreme one with the next also the wrong one, turn over; 3rd – matches the pattern, like the 1st. Next, the scheme is repeated until only the middle part remains after assembly.
Knitting socks with heel “Boomerang”
Having tied a shin in a circle on four knitting needles, you can proceed to the heel of the Boomerang type. It is slightly shorter than traditional. For the heel you will need another extra spoke. Double loops do not knit.
- According to the Boomerang pattern, the heel is tied only with the front ones. If the shin is knitted with an elastic band, then before starting the rounding, you need to go to the surface, making reductions throughout the row by 2 loops.
- Divide the total number of loops into three equal parts, or adding 1-2 extra ones to the central part that are left after division.
- 1st fits all facial.
- 2nd — turning knitting, double loop once. It is important that the loop and thread are tightened tightly, then large holes will not form. To do this, insert the needle into the loop and grab the thread located in front of it. Remove together while pulling the thread back tight. Knit purl. After completing the series, you need to turn the job.
- 3rd – stretch a double loop. Then everything is facial. Double loop. Flip over.
- 4th — repeat as 2nd. Further according to the scheme, until the loops remain only in the middle part.
The method of knitting a stepped heel at the toe
The stepped heel is knitted in the same way as in previous cases, with the help of the first and fourth knitting needles, temporarily leaving the second and third aside.
- For the back wall of the loop from the first and fourth knitting needles, throw it on one and knit with the front surface.
- Reinforced viscous begin to create a stepped heel in several stages.
- 1st – facial. We remove one loop from the wrong side, we take the thread back, knit the front loop. Flip over.
- 2nd – wrong side. Flip over.
- 3rd – alternation of one facial loop, one to remove the wrong side.
- 4th — purl. Next repeat from the first to fourth row.
- The second step is knitted as follows: the last dialed loop of the edge and the first deferred are knitted together with a facial broach. Having turned the knitting needles with thread, remove the first loop as the wrong one, then knit the wrong ones. Continue this way until all the loops of the first and second steps connect at the seam.
Double viscous heel knitting
You can increase the wear resistance of knitted socks, not only by adding an additional thread, but by applying in practice a special way to knit a double heel, increasing its thickness.
- As in all cases, knit the back wall with smooth stitches in reverse and straight rows. Having created the desired height, stop on the front row, begin to form a cup.
- Divide all the loops into three parts equally or more in the center.
- On the wrong side: the left loop, the middle, the last from the center are sewn on the wrong side together with the first loop on the right side. Flip over.
- Front row: the middle, edge and last loops are knitted together with the side, located nearby. After each row, the work needs to be turned over.
- Having knitted all the side loops, you will close the formed cup. Next, you can start tying the wedge of the lift and foot.
Learn how to knit a cap with knitting needles for newborns – diagrams and a description are attached.
Video tutorials for beginners on knitting a heel of a sock with knitting needles
It is not easy to take the first steps in knitting. Having detailed instructions at hand, it’s not always easy to understand, it’s not possible to connect the beautiful thing the first time, with even rows of loops. Having filled your hand a little on simpler things that fit in with a straight even canvas, try to start a complicated program. Learn from the video how to knit a different heel of a sock. Let warm socks for the smallest member of the family be the next step. You will bind them quickly, thanks to their size, you will acquire skills, and, most importantly, maintain the warmth of the child’s legs.
An initial course of video lessons, which are offered by skilled craftsmen with knitting experience from the first loop to the last knot, will significantly help those who only recently met with knitting needles. Unhurried movements, an accessible, detailed explanation will dot all the “I” with questions, if before that some point in the heeling of the heel was not clear. Working on socks made of wool or other soft warm yarn for the baby will bring only pleasure and benefit, and at the next stage try knitting socks using different methods that were learned from a useful video.
Can someone please explain the step-by-step process of knitting a heel toe? I’m new to knitting and would love to learn how to master this technique. Any helpful tips or resources would be greatly appreciated! Thank you!
Can someone please explain the steps or techniques involved in knitting a heel toe sock? I’m a beginner in knitting and would really appreciate any guidance or tips. Thank you!
To knit a heel toe sock, there are several key steps to follow:
1. Start by casting on stitches for the sock cuff, making sure it fits comfortably around your leg.
2. Knit the cuff in your desired ribbing pattern (such as knit 1, purl 1) for a few inches to create stretch and stay in place.
3. Begin the heel flap by working back and forth on half of the total stitches, typically in a simple knit stitch, for a specified number of rows.
4. Turn the heel by shaping it using short rows. This involves knitting partway across the heel flap, then turning the work and purling back. Repeat this process, gradually increasing the number of stitches worked each time, until you have reached the desired shape.
5. Once the heel is turned, pick up stitches along the sides of the heel flap to create the gusset. These stitches will be used to decrease and shape the sock.
6. Knit the foot of the sock in the desired length, typically in a stockinette stitch or pattern of your choice.
7. To shape the toe, start decreasing stitches on both sides of the sock. This can be achieved by knitting two stitches together or using other decreases like the Kitchener stitch.
8. When the stitches are decreased to a few, cut the yarn leaving a tail, and thread it through the remaining stitches to close the toe.
Throughout the process, it’s essential to count rows, measure the sock against your foot, and adjust as needed. Remember to check patterns or tutorials specific to heel toe socks, as they may have variations based on different constructions or techniques. Good luck with your knitting journey!