How to make a rose from beads: a mater class for beginners

The content of the article

• Big rose bead
• Bud weaving pattern
• How to weave petals on a plasticine basis
• Sepal pattern
• Bead leaves
• Rose assembly
• Small beaded roses
• Roses in a pot

Beadwork is a popular type of needlework, in which different ornaments, toys and other voluminous compositions are created from ordinary beads and wire. Roses made using this technology look spectacular and can decorate any interior or become a good gift.

Big rose bead

Beginning needlewomen can easily master the weaving of roses from beads in a master class with a photo. To create a flower you need to cook:

• pink and green beads;
• wire with a diameter of 0.3-0.5 mm;
• scissors;
• plasticine;
• yarn floss or green tape;
• wooden skewer;
• PVA glue.

The process of creating roses is laborious and can take more than one day. It consists of several stages:

• making rose petals;
• sepal weaving (bud base);
• making leaves;
• making a stem;
• assembly phase of the main parts.

Bud weaving pattern

To create a large rose, you need to make 11 petals: 8 large, 3 small. The weaving pattern is as follows:

1. Measure the wire about 30 cm long.
2. Form a loop so that the beads do not slip during work.
3. Thread 8 beads onto the short part of the base.
4. On most of the wire, start stringing 81-85 beads, make them three turns around the short part.
5. To fix the ends of the wire you need to pull through the middle 3 beads.
6. Weave 3 petals in such a pattern.
7. Then measure out 50 cm of wire and repeat all the steps, and do not 3 turns, but 5, increasing the number of beads on the long part of the base.
8. So prepare 8 large petals.
9. Give each petal a slightly curved shape..

How to weave petals on a plasticine basis

If the previous type of weaving seems difficult, you can make the petals in a different way using plasticine:

1. From plasticine, blind several blanks that resemble rose petals in shape.
2. Lubricate the forms with Vaseline.
3. String the beads, lay on the form.
4. Coat the petals on top with a clear varnish..
5. After the varnish dries, carefully remove the petal.
6. Remove Vaseline with a cotton swab.
7. Coat the inside of the workpiece.
8. So do all the parts of the bud.

Sepal pattern

To create the base of the rose, you need to make 5 sepals:

1. Take 20 cm of wire, make a loop.
2. String 5 beads onto a short piece.
3. Pass 30-40 beads over the long part, make 2 turns around the axis.
4. String 4 beads on the top of the wire.
5. Lock the end of the wire by pulling it through the middle and twisting from the bottom.
6. Make all sepals in the same way..

Bead leaves

For the base, you need to weave 6 leaves:

1. Take 30 cm of wire.
2. Make a loop.
3. String 7 beads onto a short base.
4. Thread 80–90 beads onto a long base. Make 3 turns around the axis, fasten the ends.
5. According to this scheme, weave all the leaves, combine them into branches of 3 pieces.

Rose assembly

When all the elements are ready, you can start assembling the roses:

1. On a wooden skewer, first screw the small, then the large buds of the bud.
2. Lock the sepals from the bottom of the bud.
3. Screw twigs with flower leaves to the stem. It’s better to retreat to different lengths – so the branches will look more natural.
4. Decorate the stem with green floss threads. Note that it is necessary to wind the base of the leaves.

Small beaded roses

Small flowers can be used to decorate pins, brooches, elastic bands.

To work, prepare:

• 0.3 mm diameter wire;
• nippers or scissors;
• beads of two colors;
• threads.

A small rose from beads for beginners is woven according to the following pattern:

1. String 9 beads onto the wire.
2. Make a loop, fix the ends of the wire, twisting them in 2-3 turns.
3. On the same wire make next 2 of the same arc.
4. At the tip of the base, type seven beads.
5. Pass the wire through the middle bead of the first arc.
6. Then add 2 more beads, thread the edge of the wire through the middle of the second arc.
7. Put on 2 more beads and thread the tip of the base through the middle of the extreme arc.
8. Add 7 more beads to the wire and fix its edge at the bottom of the petal.
9. According to this scheme, weave 5-7 petals.
10. Separately dial 14 beads.
11. Twist them together. It will be a sepal.
12. Collect the bud from the petals, fix the sepals below.

Roses in a pot

A lush bush rose will decorate the interior of any living room. To create a bush you will need:

• wire;
• yellow beads for a bud;
• green beads;
• skewer;
• scissors or tweezers;
• green thread floss;
• pot;
• Styrofoam;
• expanded clay drainage.

The scheme of roses from beads in a pot:

1. Pass 1 green bead into 30 cm of wire, lower it to the center.
2. String 2 more beads, passing them through both ends of the wire and tightening.
3. In the same way weave 4 rows of 3, 4, 3 and 2 beads in each.
4. To fix the ends of the working thread must be twisted knot.
5. Make 6 such sepals.
6. Similarly weave the petals. On a wire 60 cm long, make 8 rows of 1, 2, 4, 6, 8, 10, 12, 14 yellow beads.
7. 9th row – edging. 9 beads must be strung on each end of the wire, drawn through 1 row.
8. Tighten the ends into a knot. Weave 5 petals, for each of which it is necessary to re-measure and cut the wire.
9. Also weave 4 large rose petals in 9 rows.
10. Make 11 leaves, consisting of 11 rows of 1, 2, 3, 4, 5, 6, 6, 5, 4, 3, 2, 1 green beads.
11. Rose petals bend in an arc.
12. To assemble on a skewer, first connect small, then large petals.
13. From below to close a bud with sepals.
14. Distribute large leaves evenly over the entire length of the stem.
15. Wrap the stem with floss thread.
16. Similarly make other roses.
17. Cut a circle from the foam, slightly less than the diameter of the pot.
18. Insert the foam into the pot, stick the roses in it.
19. Top up with drainage.