How to weave figures from gum on the machine and without it. Weaving figures from elastic bands, video

The content of the article

• Step-by-step instructions and patterns for weaving rubber figures
• Weave “Ice Cream” on a small machine Monster Tail
• The figure of Enderman from the game “Minecraft” on the machine
• How to weave “Heart” without a machine, only on forks
• Making a rubber ball on the fingers
• How to make an Angry Birds toy on a hook
• Weaving Banana pendants from rubber bands using a slingshot
• Video tutorials for beginners on weaving animal figures from rubber bands
• Lesson weaving “Bees”
• Weaving figures in the form of “Fish”
• Easy way of weaving “Chicken”
• How to make surround “Duckling”
• How to learn to weave the “Lizard”

The whole world has captured a new fascinating hobby – weaving from rubber bands with sets for creativity Rainbow Loom, which originated in America. And this is not surprising, because such a simple, affordable material gives a lot of opportunities. When young masters and craftswomen mastered the creation of a variety of baubles, they are interested in how to weave figures out of rubber bands? You can make funny toys, key rings on a loom, prongs of a fork, a slingshot, fingers, a rainbow loom or Monster Teil. You will learn how to do this from the following workshops and videos for beginners.

Step-by-step instructions and patterns for weaving rubber figures

If you decide to do needlework with rubber bands, then the following workshops and videos will help you master new techniques, patterns, patterns, which will greatly expand your capabilities in this hobby. Weaving rubber figures is not so difficult when you have at hand all the necessary materials, tools, as well as visual instructions. The main device for weaving is a machine, which is an immovable platform with plastic nozzles, on which gum is worn during operation.

If you don’t have a loom at hand, don’t be upset, because you can weave a funny figure without it. Below are instructions for creating pendants, trinkets, animals, such as a hamster, koala, deer on a Monster-Tail mini-machine, a hook, a slingshot, forks, and in some cases you will need your own fingers to work, which without any additional tools will allow you to create a unique craft. If you work with a hook, then experienced needlewomen advise you to get a knitting metal, since it is much more convenient and easier to work with it.

Weave “Ice Cream” on a small machine Monster Tail

In this master class, you will learn how to weave an ice cream figure out of gum. It is a popsicle on a stick. For work, you may need three colors of irises: one for the stick, the second for the lower layer, symbolizing the creamy layer, the third for the main color of ice cream. We position the mini-machine so that the point is on the left. Weaving will be carried out on three upper and lower pegs. Step-by-step instruction:

• We throw in the middle, twisting two times with an eight, that is, three turns, an elastic band the color of a stick. Following the two central columns we catch a pair.
• We throw off the one that is twisted three times, to the center through the top. We throw the next two.

• Drop the bottom layer to the center. We catch two more, again we transfer the latter to the middle. We take the color of the layer, we cling to the central pegs. We throw off the orange.
• Horizontally below we throw one white. Add four turns from both edges of the iris.

• On the left and right we catch in pairs. We fold to the center wound in four turns and horizontal. We catch the main color for three pegs. Couple vertically.
• We throw off the pink horizontal, all white. We catch one on the bottom row, two vertically. Remove the horizontal whole bottom layer..

• We throw it two more times according to the described sequence. The third time we leave the center empty, and twist the horizontal two turns.
• We transfer all the irises to the central pegs. After we catch one, we throw off all the latter on it. We make a loop and remove the finished popsicle.

The figure of Enderman from the game “Minecraft” on the machine

This master class demonstrates the weaving of an Enderman figure from a popular computer game called Minecraft. This hero is completely black with purple eyes, but you can choose any other colors for your craft. Pick up a carabiner or key chain clasp to hook the finished product. We position the machine so that the open sides look at you, and the central row slightly rises above the extreme ones. Step-by-step instruction:

• We catch on a pair the head of a toy hero, as shown in the photo.
• Make eyes.

• We make the neck, shoulders on the right and left. We need to separately weave hands with a braid of seven pairs, we knit them.
• We form the body as shown in the photo.

• On the right and left side we roll the elastic bands, forming legs to the very end, where we wind in four turns to fix the weave.
• We catch the triangle on the body, we fix the workpieces of the hands. We fully knit the figure from the legs, grabbing the bottom layer with a hook, transferring it to the forward pin. We make a loop on the head, take it and remove it from the machine. We cling fasteners.

How to weave “Heart” without a machine, only on forks

To weave a heart figure, you need to choose the right color of rubber bands. The finished product can serve as a keychain, hair clip, brooch or a pleasant surprise for a loved one. To work, it is necessary to fasten four forks together: first we connect two at the top near the cloves, and then we attach these pairs to each other, we connect tape on the handles with tape. Instructions step by step:

• For the fourth clove, we catch the first iris, twisting four times. On top we throw another one for a couple of opposite cloves.
• We throw off to the center twisted in four turns. For the top three we catch one horizontally, twisting with an eight, for the third, fourth and fifth we catch in a pair. lower layer and horizontal.

• We catch two pairs for five teeth, as in the photo.
• Throw in a pair, throw off the horizontal and last row.

• Cling horizontally for seven teeth, a pair for the opposite. We throw off the horizontal and last layers. Repeat again.
• We release the fourth teeth, transferring the loops to the third and fifth. Throw horizontally on three teeth left and right, vertically for the opposite. Drop the horizontal and last layers.

• We release the first, seventh, third and fifth teeth. Weave only on the second and sixth. Remove the figure, hide the loop.

Making a rubber ball on the fingers

In this lesson, you will learn how to create a ball or bouncer ball. Choose the color of irises that you like best for him. A machine, a hook will not be needed at work, you will need to prepare a cotton pad, cotton wool or a crumpled scrap of paper for volume. Instructions step by step:

• Putting a cotton pad is the foundation. We roll the elastic, twisting as many times as elasticity allows.
• Across we catch the following. We continue to tie where there are empty spaces. The more gum turns to do, the more elastic the ball will be.

• We continue to wind up the irises, gaining the desired size of the hopper. Gradually, you will be able to throw gum with fewer revolutions, and in the end – all in one.

How to make an Angry Birds toy on a hook

By following these instructions, you will learn how to create a figurine from a game called “Angry Birds”. For her, you need to use a hook, four colors of elastic bands: two for feathers, one for beak and for eyes. Step-by-step instructions for making a flat beast:

• We put on, twisting three times, white. Next we catch a pair on one side, throw off the first gum on it, throw the other side. It will be the beak.
• Four times we wrap a different color, we drop it by one twisted by a figure eight.

• Add another link, transfer white so that the orange are between them.
• We drop everything for a couple of red ones. Add another link. We wind white four times, on top – black. This is the future eye. We transfer the edge of the previous chain so that the strung ones are inside. Add one white, two red links. Pass the tip through the previous one, add another red pair. We throw everything, except the last link, to the next red.

• Add another link, remove all weaving loops, turn over and put on the hook. So weave the second side.
• Remove all the loops on one red pair, make a loop, tighten.

Weaving Banana pendants from rubber bands using a slingshot

According to this scheme, you will learn how to weave a banana of small length. For work, it is necessary to prepare a hook, a slingshot, so that the recesses look in your direction, two colors of elastic bands. Step-by-step instruction:

• Cling to the right column black, twisting four times.
• For both branches we hook two yellow. Throw off through the top black inward.

• We put on four yellow ones. Move the previous layer to the center on the right and left.
• We put on four more, transfer the previous row inward. Repeat this one more time.

• Put on one black, remove the previous yellow layer. Add two more blacks, throw off the past. Finish weaving, forming a loop.

Video tutorials for beginners on weaving animal figures from rubber bands

Weaving with the help of silicone small rubber bands captivated many children, adolescents and even adults. This is a great way to pass the time, relax, calm down and get an interesting, original product as a result. Weaving is especially useful for children, as it helps to develop skills in working with color, combinations of different shades, perseverance, attentiveness, fine motor skills of the hands. The resulting figures from rubber bands are not afraid of moisture, they remain as bright under the influence of the sun.

In the video below for beginners from YouTube by Sergey and other masters, you will learn how to weave amusing animal figures such as duckling, lizard, chicken, fish, bee in flat and three-dimensional form using amigurumi made from elastic bands. Such crafts can serve as a pendant, a trinket for a backpack, a handbag, a bunch of keys, a toy for a child, and decoration of your room. For work, prepare in advance all the necessary materials and tools: a machine, a hook, multi-colored irises with a margin so that nothing will distract you during weaving.

Lesson weaving “Bees”

Weaving figures in the form of “Fish”

Easy way of weaving “Chicken”

How to make surround “Duckling”

How to learn to weave the “Lizard”