...

What can be made of clay

Clay is a wonderfully versatile and expressive material that can be used to create an amazing range of items with unique textures and shapes. Its malleable nature makes it ideal for modelling, sculpting, pottery, and other forms of art and craft. Clay is also highly practical, durable, and relatively inexpensive, making it an excellent choice for a range of uses, both decorative and structural. It is also non-toxic and eco-friendly, making it a great medium for both children and adults. With a little creativity and imagination, there is no limit to what can be made of clay.

The content of the article



Modeling is a simple and very exciting hobby. It allows you to independently do many different things – jewelry, toys, decorative crafts and sculptures of various shapes. Finished products are perfectly suited for unusual interior decoration and can be wonderful gifts for almost any holiday. Where to get the material for modeling, how to work with it correctly and what can be done from clay with your own hands?

Polymer clay molding for beginners

Polymer clay is a synthetic material, which in its properties is similar to plasticine, but is capable of hardening. It is called differently – plastic, thermoplastic, thermoplastics, cernite. Novice masters need to know that polymer clay is of two main types – one hardens only when baked, and the other without firing. Before choosing what can be made of clay, it is worth deciding what type of material will be used (purchased clay or mass for sculpting your own preparation).

How to make polymer clay at home

Those who do not want to bear the cost of purchasing finished material for modeling can prepare it themselves. It will be wrong to call homemade clay polymer, because it is made using completely different components. However, the resulting material can be processed using standard polymer clay techniques. To make it, you need:

All for the manufacture of material

  • 1 cup of white PVA glue;
  • 1 cup cornstarch;
  • 2 tablespoons of lemon juice;
  • 1 tablespoon of petroleum jelly;
  • 1 tablespoon of any non-greasy cream;
  • glass mixing bowl;
  • stirring spoon;
  • clay mixing pad;
  • polyethylene film.

The amount of ingredients given is enough to make about 350 g of plastic mass for sculpting. The technique for making clay is simple: with a spoon, carefully mix PVA glue, starch and petroleum jelly in a bowl. Then add lemon juice to the mass and mix everything well again. Next, the bowl must be put in the microwave for maximum power for 30 seconds.

Clay Sausages

The surface on which clay will be kneaded should be greased with hand cream. Aged in the microwave and again mixed mixture must be laid out on this surface and vigorously knead for 5 minutes, like a regular dough. As a result of all the work, an elastic and plastic material should be obtained. It must be rolled up in the form of “sausages” and wrapped in a cloth to remove excess moisture. Clay will be ready to use immediately after cooling..

What is needed for modeling

In the process of sculpting, any improvised means are used that can facilitate the work with clay and help to give the material the desired shape. It is better for novice masters not to stock up immediately with a large number of professional tools, since many may not be useful. The minimum set of devices and materials for working with polymer clay is represented by the following list:

Sculpting tools

  • hard work surface;
  • cutting tools – stationery knife, razor blade for small jobs;
  • rolling pins for rolling out different sizes – any convenient cylindrical objects will do;
  • toothpicks or needles – with their help they make holes, finely roll out small elements, fix the details;
  • cutters – the so-called special molds for cutting figures, but for the first time any other devices, for example, caps from bottles of different sizes, are suitable instead;
  • wet wipes and gloves.

Sculpting techniques

Choosing what can be quickly made of clay, you need to learn a variety of modeling techniques that offer a beginner a lot of ideas for creativity. They are used both for the manufacture of clay products without firing, and when working with baked clay. Depending on the planned shape, color, and design elements, polymer clay crafts can be performed using the following popular techniques:

Cane rolls

  • Cane technique – rolled pieces of clay in different color combinations are laid out in layers and rolled up in the form of rolls, on the cut of which original multi-colored patterns are obtained.
  • The technique of smooth color transition – polymer clay is mixed in different proportions, achieving the effect of the transition of one color to another.
  • Filigree technique – the workpiece is covered with very small pieces of clay, forming a beautiful openwork pattern.
  • Kaleidoscope technique – layers of material for sculpting different colors are rolled into rolls, and then they are given various geometric shapes by pressing them to a flat surface.
  • “Salt” technique – beads or other elements are rolled in coarse salt, baked, and after cooling, the salt is washed with water, achieving a relief texture on the surface of the products.

How to sculpt polymer clay

Self-hardening clay, after hardening to the touch, becomes like wood or gypsum, so that the products can be processed with appropriate tools. Baked polymer material after exposure to high temperature is harder and resembles plastic. You need to buy such clay at art and craft stores..

Acrylic paints

The first polymer clay products must be made in the form of elements that can be easily processed, using improvised tools and gradually mastering various simple modeling techniques. It is best to start work with flowers (roses or lilies), bouquets, jewelry. Choosing what to paint polymer clay with, preference should be given to acrylic paints. If gouache is chosen for painting, a layer of waterproof varnish is applied on top of it, and before painting with nitro enamel, the surface is recommended to be primed with epoxy glue.

Flowers

Polymer clay flowers

To make a rose, you first need to make a small ball and give it a drop-shaped form – this will be the core of the flower. Then roll up a few balls and flatten them with your fingers, turning them into thin petals. They should be wrapped one after the other around the core, forming a bud. The first petals are best left straight, and those that will be on the edges, bend out.

Articulated doll

Articulated clay doll

Foil is needed to make an articulated doll. With its help, blanks of parts are formed on which a layer of polymer clay will be applied – the trunk, head, legs and arms, as well as the hinges for the hips, knees, forearms, elbows and hands. After drying, the parts are cut and the foil is removed. Then they are ground so that they are better suited to each other in size, glued in places of cuts and connected with elastic laces.

Jewelry

Clay decoration

Ornaments of simple shapes are something that can be easily made of clay without even having good modeling skills. Any novice master will be able to make a ring, earrings, bracelet or pendant using simple techniques. It is best to choose a light version of the product for the first work, for example, to make simple beads or earrings. To do this, the clay is rolled out and equal squares are cut out in it, which are rolled into balls – so each bead will have the same size. Then you need to make holes in the beads with a needle.

Master class of polymer clay crafts for children

Modeling helps the child learn the world around him and develop fine motor skills. The possibilities for creativity are endless, but when choosing what a child can make of clay, it is better to start working with things of the simplest forms that he can do on his own or with minimal help from an adult. For example, to sculpt food for dolls together with the baby or to teach him how to sculpt different animals.

Food

Clay Products

It will be easiest for a child to fashion doll food such as vegetables and fruits. Show him how to use a needle to make an “real” peel for an orange, to beautifully arrange a leaf on an apple by drawing veins on it, or to give a regular shape to a pear. You need to master different ways and techniques of sculpting with a child gradually, and it is also important to consider that children always want to see the result of work faster. So that the baby does not lose interest in modeling, it is better for him to explain in advance that the products will not be ready immediately.

Animals

Children's crafts - dogs

For sculpting animals, it is best to use simple pictures where the animals are depicted schematically. Looking at them, it’s easier to choose what to dazzle, and it’s easier to figure out how to give the details the necessary outlines. For very small animals, it is allowed to use solid pieces of material, and larger figures are recommended to be made in the technique of hollow parts, using improvised molds for sculpting. Beads are used to decorate the eyes and spouts..

Clay products for modeling and firing

How to prepare clay for modeling? Immediately before starting work, you need to stretch it well with your hands – so it becomes more plastic. When using baked white or red clay, it is important to maintain the correct temperature when heating products. It should be in the range of 110–130 degrees, because at a higher temperature the clay may lose its shape, darken or even catch fire.

Is it possible to make baked clay ourselves? Theoretically, this is possible, but, firstly, to create such a material you need to find high-quality natural clay, and secondly, it will be difficult to properly burn it at home, without special equipment. It will be possible to independently produce such material for modeling only by experience, that is, by trial and error.

Vase

Clay vase

For the manufacture of thin and tall figures and sculptures, it is recommended to use a frame. When creating a vase, such a frame is best served by a beautifully shaped plastic bottle. It must be cut into two parts, and then each pasted with rolled layers of self-hardening polymer clay. After solidification, both parts are carefully glued together and a finished vase is obtained.

Figurines

Baby figurine

When sculpting figures and sculptures, one cannot do without a basis for modeling. To create it, various improvised materials, for example, flexible wire, can be used. If a novice master is interested in how to mold a person from clay, then in this case it is better to resort to video tutorials that show the process of performing such complex work in stages.

Clay modeling video tutorials

In the video tutorials on modeling, there is a lot of necessary information for beginners: how to burn clay at home, how best to use certain techniques. Master classes in video format help to better understand the intricacies of working with polymer material and to quickly master the independent manufacture of elements of varying degrees of complexity..

New Year crafts

On New Year’s Eve it is so nice to give relatives and friends crafts of their own making. Ideas for them are easy to find in video tutorials on creating New Year’s souvenirs using available materials. With the help of a phased master class, anyone will be able to make beautiful and original crafts – Christmas tree decorations, gift figurines or even Christmas masks that will surely please loved ones and make the holiday better.

Trinket

Skull

Dymkovo toy

Rate the article
( No ratings yet )
Recommender Great
Tips on any topic from experts
Comments: 1
  1. Wyatt Hayes

    I’m curious to know what sorts of things can be created using clay. I’ve seen pottery and sculptures, but what other creative possibilities are there? Are there any unique and interesting items that can be handcrafted with clay? I’d love to explore different options and techniques for working with this versatile material. Any suggestions or examples would be greatly appreciated!

    Reply
Add comments