What are the fillers for upholstered furniture

When buying and ordering upholstered furniture, you need to know exactly what it is filled with. The convenience and durability of furnishings depend on this. Our tips site has made for you an overview of modern fillers for upholstered furniture, so that you understand this topic and can make the right choice..

Coconut fleece

Natural material, coconut fiber. Chemical impregnations should not be! Coconut fleece is resistant to bending, as a filler it is used together with a soft quilted jacket and is designed to reduce the effect of stiff springs on softer layers. If coconut fiber is used as the main filler, then the sofa and chair will be quite tough. However, many owners like this option..

Durafil

A material that furniture manufacturers say has virtually no flaws. Durafil is made of polyester, it is a non-woven fabric, elastic, not causing allergies. Durafil is moisture resistant, neutral, does not support combustion. After a person got off the couch, this filler very quickly takes on its original shape. Most often, durafil is used to fill armrests, backs and seats of upholstered furniture.

Holofiber

Very soft, warm filler, which is widely used. Actually, this is a new generation synthetic winterizer, the fibers of which consist of miniature spirals. They provide a return to the previous shape after removal of the load. Holofiber also does not cause allergies, it is used as a filler for banquets, poufs, backs and seats of sofas and armchairs.

Important! In addition to holofiber in the form of miniature spirals, there is material in the form of balls. It restores its shape worse, so it is usually not used on visions.

Sintepon

A time-tested and well-known filler and insulation. In terms of quality, durability, reliability, it is inferior to holofiber, but it is in demand due to its low cost. It is not afraid of moisture, does not cause allergies, but it does not restore its shape after removing the load, it quickly crumples.

Polyurethane foam

He’s PPU. It is made of polymers, it looks like a sponge – a porous, foam material. Manufacturers offer ready-made shapes for sofas made of polyurethane foam, including curved backs, armrests, and so on. Withstands loads well, but punching may still appear. However, some owners find the “shape memory” effect useful: “This is my favorite place, it was formed for me.”.

Horsehair

Another natural filler, breathable, can be stretched along the length, retains the heat of the human body, does not age, and is durable. But it is quite tough and expensive, therefore, in the production of modern upholstered furniture, it is used extremely rarely, most often only in custom-made models..

Seaweed

They form a volume, when heated, they release very useful iodine compounds from the human body. After drying, the algae are braided into braids so that they do not break up into small fibers, and are attached to the burlap. Ventilation is good, they will not rot, the filler is strong and durable enough.

Batting

Well-known to many, multi-layered, quilted material based on wool. Immediately, we note that batting is not used as the only filler today. Spring blocks are wrapped with it, laid on top of padding polyester and polyurethane foam. Batting retains heat and at the same time is good for air permeability.

Synthepukh

It is a polyester fiber, hollow, siliconized. Very lush spiral material, good shock absorption, resistance to stress, retains heat, restores shape.

Styrofoam balls

This filler is used only for frameless sofas, which the portal wrote about in detail, as well as bean bags. It crumbles over time, the balls will have to be filled up so that the furniture is still comfortable.