The first question that arises before the owners of concrete fences is which paint to choose. Of course, you need paint for exterior work, intended for outdoor use. Suitable for example paints used for painting facades.
In particular, you can opt for acrylic, silicate, water-based, latex, rubber paints. Oil oils are now being used less and less due to specific features – they are more difficult to apply, it is also difficult to wash tools and clothes, they do not allow air to pass through. The most resistant are silicate, rubber and acrylic paints; for water-based and latex paints, the service life and protective characteristics are lower.
Important! Before painting a concrete fence, wait at least three to four months for the fence to shrink. If you installed a concrete fence in the summer, then it is advisable to wait until spring with painting, choosing a sunny, but not too hot day..
As for the color of the paint, it’s a matter of taste. Designers insist that it is best if the color of the fence echoes the shade of the roof of the house – this will create a harmonious picture. You can choose three colors at once – for each of the fence segments. In this case, the top is usually made lighter, highlighting decorative elements..
If the surface of the concrete fence imitates brick or stone, it is advisable to choose natural colors to add similarities. In this case, shades of brown, sand, gray, beige are perfect..
In addition to the paint itself, for painting a concrete fence, you will need a primer, preferably from the same manufacturer, chosen specifically for this type of paint. In addition, it is advisable to buy or rent a spray gun to speed up the work process..
It will be inconvenient to work with a roller on an uneven concrete surface; for narrow places and difficult terrain, it is better to take several paint brushes – a wide and narrower one.
Do not forget about comfortable work clothes that you do not mind getting dirty, gloves, and glasses to protect your eyes from splashing drops.
Before proceeding directly to painting a concrete fence, you should prepare it:
- remove plants and landscaping items that may interfere with work, for example, trim shrubs growing next to the fence, move the garden bench and flowerpots;
- clean the entire surface of dust and dirt, because the fence has already stood for some time. You can just walk with a hose, rinse off the dirt with a pressure of water, and then let the fence dry;
- if cracks or other flaws appear in the concrete fence, they are sealed with ordinary mortar before painting. Before applying a primer to such places, you will also have to wait until it dries..
It is impossible to neglect the application of a primer on a concrete fence! So the paint is absorbed deeper into the surface, it will retain its original qualities longer. The primer usually dries from 12 to 24 hours, it is better to wait a day before painting.
The paint is applied in two layers to surely hide all minor defects, achieve a deep color and protect the fence. We recommend painting from top to bottom, so as not to stain the already painted sections with drops..
Make sure that there are no drips and that the paint is evenly distributed over the surface. After applying the first layer, you also need to wait until it dries, so that you can then walk over the fence with a spray gun or brush again.
If you do not want to waste time and effort painting the fence, you can use the corresponding service. Price – from 50-100 rubles per square meter (including preparation, surface cleaning, application of a primer and two layers of paint). Prices shown do not include primer and paint costs.
Can anyone provide step-by-step instructions or tips on painting a concrete fence? I’ve never done it before and I’m not sure where to start. What type of paint should I use? Do I need to prime the concrete first? Any advice would be greatly appreciated!
To paint a concrete fence, you’ll need a few supplies and follow specific steps. Here’s a step-by-step guide:
1. Clean the surface: Begin by thoroughly cleaning the concrete fence using a pressure washer or scrub brush. Remove any dirt, grease, or debris, ensuring a clean surface for paint adhesion.
2. Repair any damage: Inspect the fence for cracks, holes, or other damage. Use a concrete repair compound to fill and patch these areas. Allow it to dry completely before proceeding.
3. Prime the surface (optional): While priming is not always necessary for concrete, it can help improve paint adhesion and coverage. Choose a primer compatible with concrete surfaces and apply it according to the manufacturer’s instructions. Allow it to dry completely.
4. Choose the right paint: For concrete fences, use a masonry or elastomeric paint that is specifically formulated for outdoor use. These types of paint can withstand weather elements and adheres well to concrete surfaces.
5. Apply the paint: Stir the paint thoroughly before applying. Use a brush or roller to apply the paint evenly over the concrete fence. Begin with a coat of primer (if used), followed by multiple thin coats of paint. Allow each coat to dry completely before applying the next one.
6. Apply a sealer (optional): For added protection and durability, consider applying a concrete sealer after the paint has dried. This will help guard against moisture, UV rays, and other elements.
Remember to follow all safety precautions mentioned on the paint and primer labels while working. It’s crucial to work in a well-ventilated area and protect yourself with appropriate clothing and eyewear. Good luck with your painting project!