How to glue paper-based vinyl wallpapers

The content of the article

• How to glue paper-based vinyl wallpapers
• Sticking process
• What glue to glue
• How to glue wallpaper in the corners
• How to glue butt

With the development of technology for creating interiors, many different types of wallpaper have appeared. Today, paper-based vinyl material has gained great popularity. Such canvases have a high density, do not lose their attractive appearance for a long time. You can give the walls a beautiful look, knowing how to correctly paste them.

How to glue paper-based vinyl wallpapers

Glue paper-based vinyl without preparing the surfaces and the material itself is not recommended. In order for the meter-long wallpaper to lie beautifully and evenly, hold for a long time, you need to take several preparatory steps:

1. First clean the walls of previous coatings: old paper and plaster.
2. The surface on which you want to glue the wallpaper, consisting of vinyl and paper, should be flat. Be sure to level it with special materials..
3. Using filler mixture, fill the cracks and fix uneven areas.
4. Eliminate the risk of mold by treating the walls with a fungal primer.
5. Please note that there are no drafts in the room, there are no air conditioners turned on. Such measures are required, since wallpapering requires absolute dryness of surfaces..
6. Cut the wallpaper into the canvas of the required size, leaving 10 cm in reserve. Lay face down, start applying glue. The surface is well saturated if you fold the cut in half for a while with the adhesive mixture inside. If the pattern repeats, number each section so as not to spoil the pattern.

Sticking process

After completing the preparation of the material and leveling, the primer of the surfaces proceed to gluing. The instruction will help you to do this correctly and evenly:

1. You need to start gluing from the corner of the room. It is important to draw an even line on the wall along which the first strip should be glued. You can mark it using special tools: level and plumb.
2. Glue the wallpaper strip on top and begin to align down vertically. Smooth the surface of the web using the roller in the same direction to remove air bubbles and unnecessary glue..
3. When moving the tool from the center to the cut borders, fasten the edges.
4. Remove excess adhesive by using a clean rag. If the border of the panel does not adhere well, smear a little with a thin brush, dipped in glue.
5. Wallpaper created from vinyl, by analogy with other heavy types, needs to be glued butt.

What glue to glue

When sticking these paintings, it is recommended to use only a special mixture. On the packaging of this composition indicates that the product is intended for vinyl or heavy materials. It is necessary to prepare the adhesive mass, strictly following the instructions. It is important to keep the correct ratio of powder to liquid so that the glue does not turn out too thick or liquid. Mix the required amount of the contents of the package with water and let it swell a little.

A good vinyl adhesive can be selected by the following criteria:

• it is easy to part with water;
• when cooking, there are no lumps;
• Has a subtle, unsharp smell;
• the adhesive mass provides sliding, which will help to more easily align the cuts during gluing;
• the component includes a component that prevents the appearance of fungi under the paper;
• does not provoke the formation of spots;
• may remain usable for up to 2 weeks.

In modern markets, vinyl adhesive is represented by several well-known brands:

• “Moment”;
• Express Vinyl;
• “KMTS-N”;
• Metylan;
• Kleo;
• Fintex.

How to glue wallpaper in the corners

It is not very difficult to attach cuts to the protruding corners of the room. To do this, just wrap the edge of the canvas over the protrusion. But such a technology is only suitable if the corner has smooth edges. Otherwise, you need to fix a strip of paper on one side of the wall with an allowance of 3 cm. The stock must be wrapped and attached to the opposite side of the corner. Cut the fixed allowance with a clerical knife so that a small edge remains. The following fabric is glued with an overlap, which should not be more than 5 mm.

How to stick vinyl on the inside corner:

1. Attach the first wallpaper to the wall with a 5 cm allowance, which should be located on the opposite surface.
2. Lubricate the protruding piece with PVA glue. Glue the second strip so that it does not touch the wall next.
3. Smooth the gluing place with a special wide plastic brush or roller. If the adhesive sticks out, wipe it off with a clean cloth.
4. When the adhesive mass dries out, cut two layers of paper with a paper knife in the direction from bottom to top.

How to glue butt

Technology how to glue back-to-back vinyl wall paper:

1. Having well smeared a piece of paper with glue, attach it strictly along the line marked with a level.
2. The sticker must be carried out so that there is a supply of paper of about 5 cm, located on top and bottom.
3. The sticking of vinyl is complicated by the fact that the material has the ability to compress during drying and high extensibility during sticking. Therefore, when you press and smooth them, avoid tensioning the width so that cracks do not form when drying.
4. Glue the next section exactly to the previous one, so that the edges touch. Gently roll the seams with a small roller.
5. If after drying you find small cracks, try to eliminate them by slightly bending the edges of the canvas, smearing it with glue. Pull wet vinyl to the edge of the joint.