How to wash the white sole of the sneakers from dirt and yellowness

The content of the article



Sports shoes quickly lose their attractive appearance. Frequent jogging, exercise in the gym or just walking spoil the rubber sole. It appears scratches, stains, traces of grass, earth, yellowness. There are techniques that help clean the white sole of the sneaker, to return it to its previous appearance. They are easy to apply at home.

Useful tips for cleaning the white sole

How to clean a white sole

Before washing the rubber surface, prepare:

  1. Clean dirt, dust.

  2. Remove the shoelaces, wash in soapy water separately or in the machine along with other things.
  3. Take out the insoles, wash them in order to get rid of bad smell, traces or spots.
  4. Pre-treat the seams with any gentle bleaching agent – soda, toothpaste, soap, laundry detergent.

Helpful hints:

  1. Wash the base of the shoe as thoroughly as possible, get to all the recesses with a soft toothbrush and soap.

  2. Clean the fabric or leather surface according to the information on the label, or apply the delicate wash mode.
  3. To wipe the white sole on shoes, do not use chlorine based products. Over time, after applying them, persistent yellow spots may appear..
  4. Carry new things carefully, avoid deep puddles, green grass.

Best Sole Whitening Methods

There are many home remedies that you can use to restore your shoe to a neat appearance. Try to wash your shoes with a brush with soap, detergent, clean with soda or vinegar. You can wipe stains with an eraser, melamine sponge, alcohol or acetone.

Soap brushing

Washing shoes with a brush with soap

Soft bristles will help to make the sole of the sneakers white. It will wash away contamination even in the most inaccessible places.

Mode of application:

  1. Take a liquid hand detergent – the powder may scratch or get stuck in sneakers.

  2. Dilute soap with warm water.
  3. Scrub the inside, outside of the shoe.
  4. Wipe off the residue with a damp cloth.
  5. Fill the shoes with white cotton towels or paper so that when they dry, they do not lose their shape.
  6. Do not use the newspaper – ink stains may remain dark.
  7. When the shoes are completely dry, use a white, black, or clear cream to mask scratches, stains of paint.

Washing powder

Shoe washing powder

This is another good tool for a white sole. Powder is an abrasive substance, to wash it with a rubber surface, add water.

Application technology:

  1. Clean the base of the shoe from stones, dirt, or debris..

  2. Remove the shoelaces.
  3. Prepare a mixture of a teaspoon of washing powder and a glass of warm water. Whip the liquid until a soapy foam forms..
  4. Dampen the toothbrush in the mixture, treat dirty areas of the joints.
  5. Rinse the base of the shoe in a circular motion to remove stains as much as possible. Wet abundantly again, use brush as many times as needed..
  6. Soap a solution on the insole, the inner, the outer side of the sneaker, sneaker.
  7. If there are deep black streaks on the white surface, add a small amount of water to a teaspoon of powder to make a thick paste.
  8. Apply it in a thick layer on the dirt, rub it thoroughly with a brush.
  9. Wipe the shoes with a damp and wrung sponge. Rinse and remove soapy water again..
  10. Let the sneakers dry naturally in the air and then lace up.

Machine washable

Machine washable

Check the label to make sure that shoes can be washed in this way. Most sneakers are allowed to machine wash. If they are made of leather or suede, only manual processing is shown..

The order of washing in the car:

  1. Clean the shoes from dry dirt, stones, put them in a special mesh bag.

  2. Load it in the washing machine along with towels to soften bumps on the drum walls.
  3. Add liquid detergent.
  4. Start a gentle cycle with a water temperature not exceeding 40 .
  5. After washing, do not put shoes in the dryer, so as not to deform.
  6. Put sneakers or sneakers in a well-ventilated area, after removing the insoles, wait until they dry.

Toothpaste brushing

Toothpaste Shoe Cleaning

This method will help to remove the yellowness from the white sole, if stains remain after washing. You will need a toothpaste or powder with a whitening effect, a brush with sharp hard bristles. For best results, you can add baking soda. Do not use colored and helium toothpastes.

A method to help wash dirt:

  1. Apply paste, rub with a brush, leave for 20 minutes.

  2. Rinse with plenty of cool water.
  3. Air dry.

Soda bleaching

Sole whitening soda

To wash the dirty white sole of the sneakers, use this method:

  1. Mix baking soda with liquid washing powder in a ratio of 1: 1 until a homogeneous paste is formed.

  2. Apply the mixture to the sole, spread over the entire surface with a clean toothbrush.
  3. Wet the sponge with cool water, wipe the paste with baking soda.
  4. Remove all dirt by constantly washing and squeezing the sponge..
  5. Wipe the surface with a dry cloth.

Removing Acetone Stains with Acetone

Removing old stains with acetone

To remove the white sole of the sneakers from stubborn yellow and black dirt, nail polish remover will help. Prepare a white cloth or cotton pads. Be careful – acetone dissolves paint.

Work procedure:

  1. Gently wipe areas of the rubber sole where there are dirty spots.

  2. Rinse with cold water.
  3. Put your shoes outdoors to eliminate pungent odor.
Rate the article
( No ratings yet )
Add comments

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: