Recommendation points
- Designer furniture from the remains of pipes
- Shoe compartments to save space in a small corridor
- Foldable tumble dryer made of thin tubes
- Safety ladder for children or animal entry limiter
- Rack for books and technology
- Stand for electrical appliances in the bathroom
- Original lamp on the floor or bedside table
- Bed made of pipes and fittings
- Pipe cuttings to help gardeners and livestock breeders
- Organizer for tools
- Tube cart
- Automatic feeder for poultry
- Pyramid for seedling and growing strawberries or greens
- Lawn sprayer
- Garden furniture and architecture from the remains of pipes
- Armchair with coffee table
- Openwork gazebo from rings
- Fence that does not require painting
- Bicycle parking for the whole family
After laying communications in the house, there are many scraps of pipes and fittings. Using them on the farm, you can create original crafts and useful products. And after painting them, your guests will never guess what the structure is made of. Letโs find out what you can make from the remains of PP and HDPE pipes.
Designer furniture from the remains of pipes
Famous designers create masterpieces from improvised means. Letโs try to keep up with them and provide ourselves with free and original furniture from unnecessary pipe scraps..
Shoe compartments to save space in a small corridor
Sewer pipes are more suitable under the rack because of their diameter. A pair of shoes should fit freely in the future cell, and choose the length according to the largest pair. If you have children, you can make cells of different depths and glue them in the form of a pyramid, long below and short on top. Before gluing the pipes, paint or cover them with foil. Such cells are not afraid of moisture and do not allow vapors to mix..
Foldable tumble dryer made of thin tubes
A foldable tumble dryer can be assembled using a few pipes and fittings. It is easily installed outdoors, and is brought into the house at night or in the rain.
For this you will need:
- two turns;
- connections;
- four tubes for legs;
- one tube as the top bar;
- several pipes on which things will be dried.
Please note that drying bridges are made in different lengths. On the one hand, they are slightly smaller, since one pair of legs is attached inside the second, narrowing the gap between them.
Safety ladder for children or animal entry limiter
Owners of two-story houses with babies are often worried that a child may fall off the steps. To protect children, it is enough to put a small wicket made of plastic pipes. It is also suitable for installation in a doorway if there are rooms that dogs should not enter..
Rack for books and technology
For expensive equipment or a large number of books, it is better to choose sewer pipes, they are stable and withstand a lot of weight. Shelves can be cut directly into pipe walls or placed on lintels. Those shelves that you put on the crossbars on the sides โ secure with silicone or glue so that they do not slip off in case of accidental shock.
Stand for electrical appliances in the bathroom
You just need to find a pipe with a suitable bend and paint it in your favorite color. If you want to apply an image, but do not know how to draw, just cut out the pictures and, attaching them to the product, fix with varnish.
Original lamp on the floor or bedside table
To create such a lamp, you will need a pipe, a cartridge with a platform, a wire with a plug and a soldering iron or awl. The inside of the pipe is painted ivory, and the outside is black, brown or other dark colors. Draw a contour with chalk and make holes along it.
It is better if you use a soldering iron or a device for burning and do not through, but slightly melted points. Then you can adjust the brightness of the pattern. In thin places, the dots will be lighter, and in slightly soldered ones, darker. Such dots can be colored and your glowing silhouette will take on different shades..
Bed made of pipes and fittings
To create a bed, you will need a lot of large diameter pipe cuttings and the same number of joints. All connections are recommended to be glued. You will not disassemble it anyway, and moving the bed without glued particles can result in a complete collapse of the entire structure.
You can, of course, assemble a simpler model, without rounding the back, then long cuts will come in handy, but it will not be so strong.
Pipe cuttings to help gardeners and livestock breeders
Most of all, useful crafts from plastic pipes will be appreciated by people who are in the garden or keep pets. They are easy to clean and convenient to maintain.
Organizer for tools
Many of us keep our tools in a drawer or hang them on nails in the wall. The first method is inconvenient due to long searches, and the second is due to lack of space. Plastic pipes allow you to โhangโ tools perpendicular to the wall. To do this, you need to make oblique cuts and fix the cells from the tubes to the wall..
Tube cart
In addition to pipes with fittings, you will also need wheels. The base can be assembled in various shapes and sizes. In our case, a variant of very small clippings is shown that cannot be applied in another area..
Automatic feeder for poultry
People who raise chickens are familiar with the small feeders that hold the cans of grain. The presented feeder works in a similar way. Under its own weight, the grain from the pipe wakes up into the feeder.
Pyramid for seedling and growing strawberries or greens
The very base for attaching the pipes can also be assembled from the remains, and instead of one oblong slot, make round ones and insert plastic cups there. Then the roots will not intertwine with each other, and the seedlings will be easier to take out. Several pipes can be placed vertically, making a slight slope. Make slots along the entire length and install turns instead of pots.
Lawn sprayer
A square is assembled from four pipes and turns. A tee is mounted on one of the pipes and an outlet is made to the hose. Small holes are made in each tube, at a distance of 5โ10 cm from each other. When water is supplied, the pressure will create small fountains for watering the lawn.
Garden furniture and architecture from the remains of pipes
Outdoor furniture should be resistant to precipitation, sunlight and easy to clean. All these requirements are met by garden furniture made of plastic pipes..
Armchair with coffee table
To create such a set, you will need a large number of plastic pipes of different lengths, but the furniture looks very original. Will look great both in the garden and inside the house.
Openwork gazebo from rings
By sawing the remains of pipes of different diameters into rings, you can assemble an openwork arbor. It looks great in the cold season, when the plants are without foliage, and in the summer, when the rings are overgrown with climbing plants..
Fence that does not require painting
The pipes themselves are neat and are not afraid of burnout. If you have a lot of scraps left, make a fence or railings from them. Of course, he is unlikely to save from criminals, but as a fence between neighbors it is quite acceptable.
Bicycle parking for the whole family
Cycling enthusiasts often face the problem of storing them. By installing a parking lot in the garden made of plastic pipes, you no longer have to drag bicycles from place to place or lift them up on the wall.
Almost all structures are assembled very simply and, if necessary, can be disassembled and transported. When choosing trims for modeling, pay attention to the stiffness of the pipes. Some are able to withstand a person, while others are only suitable for decoration or light use..
What are some creative or practical ways to repurpose or recycle leftover PP and HDPE pipes? Any DIY projects or innovative solutions to make use of these materials instead of letting them go to waste? Open to suggestions!