What are window bars and what are they for?

Installing windows with spros is a personal matter for each person. For some, the most important value is the appearance of the window, while others consider its functionality the most important. However, in any case, before buying roof bars for windows, it is necessary to evaluate both aesthetic and operational parameters..

Thanks to modern materials and window production technologies, there is a wide range of different window designs. These can be traditional constructions, with a classic undocking by means of spros or layouts, as well as spread surfaces with narrow frames, which are able to provide maximum light access to the room. The decision of the issue of decorating the window with constructive or more decorative spros is in the jurisdiction of the architect, and also depends on the personal wishes of the owner of the premises. It must be remembered that the tool chosen for decorating a window throughout the life of your home will set the stylistic orientation of its facade, influence the degree of thermal insulation, as well as the level of difficulty in cleaning windows. As a result, such a decision must be conscious, balanced and thoughtful, because the windows of your house are an investment for the long term..

Windows, equipped with spros, and attracting additional attention, do not allow an arbitrary choice of window layout. Therefore, an incorrectly selected window layout pattern can disfigure both the interior and the exterior of the house, it is preferable that this layout conforms to the recommendations of the architect, whose advice should not be neglected even when making independent changes to its drawing..

When placing an order for a window with railings, it is necessary to indicate their location, type, color and width. For your own convenience, use computer programs, thanks to which you can set the desired view of the window, change the location and color of the spars, and also make sure that the prices are correct. You can then take the color printouts with you and make the best decision in a relaxed home environment.

Possible parameters and sizes of bars

Shpros vary in width, they can be milled or straight, and also come in the form of an arc or circle curved. Ropes can be connected at different angles, thus forming a window pattern and creating different shapes. The presence of spros allows arbitrary symmetric or asymmetric division of glass into two or more identical fields.

From an aesthetic point of view, constructive spros are considered the best. Structural bars look great as part of a window structure, since they are considered part of the window frame, and also because imported profiles are used in the production of these bars, made of the same material as the frame. Constructive spros divide the window into several fields. An individual glass unit is installed in each field. As a rule, these spros are used to decorate large windows. This design is undoubtedly comfortable and looks quite impressive..

There are several more types of decorative shpros – interglass, adhesive and overhead. It is worth adding a few words about inter-glazing shpros, which are a layout in the form of strips made of synthetic material or aluminum, located inside the glass unit. These bars with the help of connectors form a certain spatial pattern, have a decent appearance and make the window much more massive. Interglass slats are used for decorating both residential buildings and industrial premises and today they are widely used in all areas of construction.

As for the technical parameters of various types of crossbars, wide structural crosspieces, the width of which is 45 mm, cannot be bent in the form of a circle or an arc with a radius of 8 cm. from 8 to 22 cm.

To improve the appearance of the bars to be glued to glass, it is recommended to install a spacer in the inter-glass space between the bars, thanks to this technique, you can achieve full similarity with constructive bars.