How to clean your bathroom to shine in 7 steps

The content of the article

• 1. Remove limescale in the shower stall
• From chrome surfaces
• From plastic curtains or cabin walls
• 2. Wash the tiles on the walls and remove the mold on the ceiling
• 3. Update grout between tiles
• 4. Bleach the toilet
• 5. Clean the sink of stubborn dirt
• 6. Wash your hand towels in high heat.
• 7. Remove dirt and fungus from the vent in the bathroom

Due to high humidity, constant temperature changes in this room, you need to regularly wash not only the sink or shower tray, but also the rest of the surface – tiles, drains, plumbing fixtures. Recommendations on how to clean the bathroom will help to quickly clean the room and keep it in perfect condition daily..

1. Remove limescale in the shower stall

After taking a shower, be sure to remove residual water, condensation from all surfaces of the bathroom. This will help prevent the formation of limescale. Open the door or window for a few hours to lower the humidity level in the room. Otherwise, wet surfaces will become a favorable environment for the growth of pathogenic bacteria, mold that can cause fungus, dangerous lung infections.

Ventilate the bathroom regularly.

From chrome surfaces

This substance is covered with metal taps, shower heads, drain holes. White (colorless) food vinegar will help remove limescale from such surfaces. Pour a small amount of the substance into a regular plastic bag, immerse the shower head in it. Let it get wet over night. On other chrome-plated surfaces, apply vinegar with a dry cotton cloth, leave for 7-10 hours. Rinse with plenty of water in the morning..

From plastic curtains or cabin walls

From products and coatings of this material, limescale is removed with a paste of baking soda and vinegar (a few drops per small cup). Apply the composition to the surface in a dense layer, after an hour remove with a microfiber cloth. Shower curtain, anti-slip bath mat, wash in a washing machine with ordinary powder with a few old towels. They like scrapers will remove the formed plaque.

2. Wash the tiles on the walls and remove the mold on the ceiling

For these purposes, use a universal disinfectant spray. Apply the product on the surfaces of walls, ceilings and turn on hot water at the highest temperature. When the bathroom is full of steam, close the door from the outside and let it mix with detergent. After 20-30 minutes wipe the surface with a dry cloth, wash the floor with a microfiber mop.

To prevent the formation of plaque, stains on the tiles, treat the tiles with wax once a year. Use an automotive or furniture composition.

To prevent mold from appearing on the ceiling, cover it with paint with special markings. Ventilate the bathroom regularly to reduce humidity..

3. Update grout between tiles

This substance has a porous structure. When moisture gets on the grout, a favorable environment is formed for the reproduction of microbes. Clean the darkened areas with bleach, which is best applied with a small brush. After cleaning, wash the tile with water. To prevent new pollution, once every six months re-seal the grout, regularly ventilate the bathroom.

4. Bleach the toilet

Pathogenic bacteria Salmonella and E. coli constantly live on its rim. They can not be removed with a simple wash of water. Thorough cleaning of the bathtub, toilet bowl is carried out with soda solution, special means and bleach. Be sure to wipe the outer surfaces. Use rubber gloves for work.

To prevent severe contamination, install special systems that clean the toilet after each drain.

5. Clean the sink of stubborn dirt

Its drain hole contains more bacteria than the same place in the bathtub and the surface under the rim of the toilet bowl. Before cleaning the sink, pour colorless vinegar with soda powder or a special product into the sink drain. After 15-30 minutes rinse with plenty of water.

Acrylic internal surfaces of the sink, bathtubs, clean with a soft sponge so as not to scratch them. Have to abandon household chemicals containing acid and alkali. They can damage the enamel. Home remedies with ammonia, hydrogen peroxide, lemon juice will help to clear difficult spots..

Faucet handle water opening handle vinegar.

6. Wash your hand towels in high heat.

They need to be changed in the bathroom every three to four days. Bacteria actively multiply on moist cotton products. Wash them at high temperature, with bleach, and dry on a special rack. It is better to fold clean towels and store them in lockers, on shelves or use special baskets for this.

7. Remove dirt and fungus from the vent in the bathroom

In this place a lot of dust accumulates, harmful microorganisms. Remove the vent cover, immerse it in a bath cleaner and wait 15-20 minutes. Then rinse and dry thoroughly with a dry cloth.

Clean the dirt from the fan blades with a special brush, then go over them with a damp cloth. This will reduce the likelihood of mold, mildew..