Liquid nails – mounting adhesive, instructions for use and specifications, video

The content of the article

---

• What are liquid nails
• What can be glued with liquid nails
• How to work with liquid nails
• Types of Liquid Nails
• Liquid nails for plastic
• Liquid nails for mirrors
• Liquid Styrofoam Nails
• Liquid nails for wood
• Liquid nails for metal
• Liquid nails for concrete
• Liquid polystyrene foam nails
• Liquid nails for outdoor use
• Universal liquid nails
• How to choose liquid nails

---

If you decide to buy liquid nails, then you should know that this is a type of glue with high strength characteristics, the scope of which is the connection of materials during construction and installation. Bonded surfaces can even be heterogeneous. Due to the content of fine-grained filler, such a mounting adhesive can also connect loose parts. How to glue with liquid nails and choose them, you will learn below.

What are liquid nails

The name itself comes from the American brand Liquid Nails by Macco. She in the middle of the 20th century was the first to produce glue in cartridges. Liquid nails are a very strong adhesive based on acrylic and organic solvents. Clay with increased ductility is used as a fine-grained filler. The cost of liquid nails in Moscow and St. Petersburg varies between 100-500 rubles. It is not very expensive.

What can be glued with liquid nails

The main area of ​​use is construction and repair. Glue helps to connect a variety of materials. Even a drop of the product is able to withstand a weight of almost 50 kg, and on the ceiling. In general, the strength of the adhesive is from 12 to 80 kg per square centimeter. Almost any surface is suitable for joining them – aluminum, stone, drywall, mirrors, wood, polymer tile. Plastic, glass and ceramics can also be glued with liquid nails.

How to work with liquid nails

The main thing in the instructions is how to use liquid nails, observe safety measures. A respirator, gloves and goggles will be required to prevent damage to the skin and respiratory tract. The drying time of liquid nails is 24 hours, although they set in 20-35 minutes. Before starting work, glued surfaces must be wiped off from dirt. The adhesive may be cold or hot cured. It is applied in dots or stripes, the tube must first be inserted into the gun. Then the parts are pressed tightly together.

Types of Liquid Nails

Strength and adhesion determines the chemical composition of the adhesive. Organically soluble and water soluble types of liquid nails are distinguished by this criterion. They differ in many ways. The main characteristics of each type:

1. Organically soluble, synthetic rubber based, or neoprene nails. They are considered universal, are used in any climatic conditions and are suitable for all surfaces. They have a pungent odor that lasts for several days.
2. Water soluble, or acrylic nails. They are more environmentally friendly, but cannot be used at sub-zero temperatures. Suitable for bonding porous materials and other lightweight structures. You can wash them with water and a mineral solvent..

Liquid nails for plastic

In addition to the main classification according to the composition, there is a separation of construction glue and according to the materials for which it is recommended. For example, liquid nails for plastic. On the packaging for them it is written that the adhesive is suitable for PVC. It is better to take compounds with a setting time of less than five minutes, otherwise it will be inconvenient to press the materials to each other, especially the panels to the ceiling. As far as manufacturers are concerned, the most famous are Pozitiv, Titanium, Makrofix, Krass, Kraftool, Titebond and Quadro.

Construction adhesive Kraftool KN-915

Price:

• tube of 310 ml – 131 r.

Characteristics:

• application temperature – 10-30 degrees;
• color – beige;
• setting time – 10 min .;
• complete drying – 72 hours;
• heat resistant;
• water resistance – yes.

Pros:

• additionally contain an antiseptic;
• can be used indoors and outdoors.

Minuses:

• no.

KRASS glue, especially durable, white, 300 ml

Price:

• 140 r.

Characteristics:

• storage temperature – 5-25 degrees;
• setting time – 15 minutes;
• complete drying – 24-72 hours;
• basis – water;
• water resistance – yes.

Pros:

• does not crack;
• does not shrink;
• moisture resistant;
• odorless;
• thixotropic.

Minuses:

• no.

Liquid nails for mirrors

With the final decor of the premises, it is often necessary to glue the mirror, for example, in the hallway or bathroom. In this case, silicone glue is required. Such liquid nails for mirrors are optimally suited. But there are a few nuances of installation. Until the moment of complete setting, the mirror should be fixed with masking or construction tape. The glue itself must not be applied clearly at the edges, otherwise the composition will leak out.

TYTAN Professional for mirrors No. 930, beige, 380 g

Price:

• 125 r.

Characteristics:

• expiration date – 12 months;
• consumption – 200-400 g / m2;
• setting time – 5-10 minutes;
• complete drying – 72 h.

Pros:

• does not damage the amalgam of mirrors;
• good adhesion;

Minuses:

• no.

Mounting moment for mirrors, 390 g

Price:

• 118 r.

Characteristics:

• expiration date – 18 months;
• consumption – 33-41 sq.m. mirrors;
• setting time – 20 min .;
• complete drying – 24 hours;
• application temperature – from -17 to +40;
• basis – synthetic resin.

Pros:

• does not damage the amalgam of mirrors;
• resistant to vertical shifts;
• does not exfoliate;
• remains flexible;
• moisture resistant.

Minuses:

• has the risk of explosive ignition of vapors near heat sources.

Liquid Styrofoam Nails

Applying such building glue when working with polystyrene foam, it is important to pay attention to the composition of the chosen product. It should not contain substances that will react with a heater. The conditions for subsequent operation are also important. Liquid foam nails are also applied pointwise or in thin strips around the entire perimeter of the bonded surface..

Installation moment Superstrong, 250 g

Price:

• 165 r.

Characteristics:

• expiration date – 18 months;
• consumption – the output with a 6 mm diameter roller is 14 m;
• setting time – 15 minutes;
• complete drying – 24 hours;
• White colour;
• basis – synthetic resin.

Pros:

• without smell;
• does not contain solvent;
• possesses super strong setting of 70 kg / m2 already at the time of gluing;
• suitable for outdoor and indoor use.

Minuses:

• not suitable for teflon, polypropylene, polyethylene.

Mounting adhesive STAYER, moisture resistant, 280 ml

Price:

• 118 r.

Characteristics:

• expiration date – 18 months;
• consumption – 300-500 g / m2;
• setting time – 10 min .;
• complete drying – 72 hours;
• color – beige;
• application temperature – from 10 to +30;
• water resistance – yes.

Pros:

• suitable for indoor and outdoor use;
• weather resistant.

Minuses:

• no.

Liquid nails for wood

In home repair work with wood is also often featured – stick platbands, decorative elements, a plinth or decorate a doorway. Construction glue is used with ordinary nails. Liquid is important to choose the right, because living material has the property to swell from moisture and dry out when it is lacking. Because of this, the attachment of parts may loosen. Liquid nails for wood in addition to bonding elements perform the function of protecting real nails from rust. There are also special compounds that can handle even wet wood..

Makroflex MF910 for panels, 400 g

Price:

• 150 r.

Characteristics:

• expiration date – 18 months;
• consumption – 300-500 g / m2;
• setting time – 5-10 minutes;
• complete drying – 72 hours;
• application temperature – from -7 to +40.

Pros:

• water resistant;
• vibration resistant;
• suitable for work inside and out;
• elastic.

Minuses:

• not suitable for teflon, polypropylene, polyethylene.

Vermeister Quick Stop Adesivo, 310 g

Price:

• 150 r.

Characteristics:

• expiration date – 12 months;
• color – transparent;
• basis – water;
• complete drying – 24 hours;
• application temperature – from -7 to +40.

Pros:

• ideal for fixing platbands, edging;
• thixotropic;
• grip tightly after gluing.

Minuses:

• for internal use only.

Liquid nails for metal

There are special liquid nails for metal, which allow it to be glued to various substrates in construction, including concrete, plaster, brick and gypsum, and not cause corrosion. In this case, only neoprene formulations are used. Only they are able to stick metal sheets or just metal products.

CYCLONE Glue instead of nails 99

Price:

• 120 r.

Characteristics:

• expiration date – 18 months;
• consumption – 300-500 g / m2;
• base – styrene butadiene rubber;
• complete drying – 24 hours;
• application temperature – 10-30 degrees.

Pros:

• express setting;
• water resistance and elasticity of the seam after hardening;
• strength.

Minuses:

• no.

Titebond Invisible Bond, clear, 380 g

Price:

• 220 r.

Characteristics:

• expiration date – 18 months;
• consumption – 300-500 g / m2;
• setting time – 10-15 minutes;
• complete drying – 24 hours;
• application temperature – from 5 degrees.

Pros:

• quick initial setting;
• strength.

Minuses:

• no.

Water-resistant liquid nails for the bathroom

In rooms with high humidity, it is advisable to use building glue with high resistance to water. When choosing a product, be sure to ensure that this property is indicated on the package. Waterproof liquid nails for the bathroom are often used when working with tiles – laying or lining. In this case, it is worth considering that with this glue you will have less time for correction, because the composition quickly sets.

Isonail G815 for bath 300 ml

Price:

• 210 r.

Characteristics:

• expiration date – 18 months;
• consumption – 10 linear meters;
• setting time – 5 minutes;
• complete drying – 24 hours;
• basis – synthetic rubber.

Pros:

• dries quickly;
• suitable for non-porous surfaces;
• chemically resistant;
• fills irregularities without shrinkage.

Minuses:

• no.

Macroflex MF915 Sanitary, plumbing mounting adhesive, 400 g

Price:

• 158 r.

Characteristics:

• expiration date – 18 months;
• color – gray, beige;
• setting time – 10-15 minutes;
• complete drying – 24 hours;
• application temperature – from -7 to +40.

Pros:

• water resistant;
• vibration resistant;
• elastic;
• can be painted.

Minuses:

• no.

Liquid nails for concrete

The heaviest material of all is considered concrete. Heterogeneous surfaces, such as drywall, rubber, plastic and even metal, often need to be glued to it. In addition, many works are carried out outside, so liquid concrete nails should be suitable for this and, in some cases, even have frost resistance. Often they become a good alternative to polyurethane foam and dry mixes..

Mounting adhesive ZUBR KM-250 superstrong, Expert series, transparent, 300 ml

Price:

• 193 r.

Characteristics:

• expiration date – 18 months;
• color – transparent;
• setting time – 10-15 minutes;
• complete drying – 24 hours;
• application temperature – 15-30 degrees.

Pros:

• water resistant;
• good adhesion;
• shock and vibration resistant;
• frost resistant;
• elastic.

Minuses:

• no.

STAYER BlackPRO EXTRA FIX S-901 superstrong, PROFI series, 280 ml

Price:

• 150 r.

Characteristics:

• expiration date – 12 months;
• color – beige;
• setting time – 10-15 minutes;
• complete drying – 24 hours;
• application temperature – from 10 to 30 degrees.

Pros:

• quick initial setting;
• strong durable connection;
• frost and temperature resistant.

Minuses:

• no.

Liquid polystyrene foam nails

The main advantage that liquid polystyrene foam nails have over dry mixes and polyurethane adhesives is their quick setting. This makes installation less difficult. This is due to the fact that the foam sheets or plates do not have to be propped up, which often has to be done when warming the outer brick walls. But in such cases, it is still recommended to use both types of adhesive compositions at once. So the quality of the connection is greatly improved.

Mounting adhesive ZUBR PM-900 polyurethane, extra-strong, Expert series, 300 ml

Price:

• 450 r.

Characteristics:

• consumption – 300-500 g / m2;
• color – transparent;
• setting time – 10-15 minutes;
• complete drying – 72 hours;
• application temperature – from 5 to 10 degrees.

Pros:

• 2 in 1 – glue and sealant;
• high speed curing;
• without smell;
• resistant to UV radiation;
• frost and vibration resistant;
• durable elastic.

Minuses:

• no.

BAU MASTER mounting for expanded polystyrene, 31 ml

Price:

• 85 r.

Characteristics:

• expiration date – 18 months;
• consumption – 200-400 g / m2;
• setting time – 15 minutes;
• base – styrene-acrylic dispersion;
• complete drying – 48 hours;
• application temperature – from 10 degrees.

Pros:

• incombustible;
• elastic and impervious seam;
• fast initial binding;

Minuses:

• not suitable for glass, mirrors and heavy structures.

Liquid nails for outdoor use

The main property that liquid nails should have for outdoor use is frost resistance. They must resist moisture well. No less important in this case is the strength of the glue. Withstand temperature extremes and precipitation are capable of compositions based on organic solvents. Most of them have a pungent and unpleasant odor, but for the street this fact is not so critical.

Glue “Ultima 309” (for outdoor use), 360 g

Price:

• 184 r.

Characteristics:

• expiration date – 18 months;
• color – light brown;
• setting time – 3-5 minutes;
• complete drying – 24 hours;
• application temperature – from 5 degrees.

Pros:

• withstands even heavy construction.

Minuses:

• Strong smell.

Titebond Heavy Duty, 310 g

Price:

• 237 r.

Characteristics:

• expiration date – 18 months;
• color – light brown;
• setting time – 20-30 minutes;
• complete drying – 24 hours;
• application temperature – up to 18 degrees.

Pros:

• quick initial setting;
• glues even wet and frozen wood;
• flexible.

Minuses:

• grabs for a long time.

Universal liquid nails

A special category of construction adhesives stands out, which are used for almost any material and under any conditions. These are universal liquid nails. They differ in optimal characteristics, which is why the scope of their use is much wider than in other species. Although tea is used for small repairs, such compositions do not have a narrow focus.

LN-601 MASTERTEKS universal 310 ml

Price:

• 220 r.

Characteristics:

• expiration date – 18 months;
• flow rate – 11 with a layer width of 6.5 mm;
• setting time – 10-15 minutes;
• complete drying – 24 hours;
• application temperature – 10-30 degrees.

Pros:

• quick initial setting;
• suitable for wet rooms.

Minuses:

• no.

Kraftool Universal, 300 ml

Price:

• 153 r.

Characteristics:

• expiration date – 24 months;
• setting time – 10-20 min .;
• complete drying – 24 hours;
• application temperature – from 5 to 40 degrees.

Pros:

• sticks together almost all materials, even expanded polystyrene;
• frost and water resistant.

Minuses:

• no.

How to choose liquid nails

It is difficult to unequivocally answer the question of which liquid nails are better. It all depends on the bonding conditions and the materials being joined. One of the best options is considered “The moment of installation is extra strong.” This composition is almost universal, suitable for bonding heavy facings and even polystyrene. In general, when buying, it is important to consider the following factors:

1. Type of glued surfaces. Water-based only suitable for joining porous materials. Smooth ones can only be glued with neoprene compounds.
2. Location of work. There are compositions for indoor or outdoor use. There are those that are used in both cases. You need to look at the packaging..
3. Weight of parts to be glued. In this case, it is necessary to pay attention to the strength of the selected composition, it is indicated in kg / m2.
4. Craftsmanship. If you are using any of the adhesives for the first time, it is better to choose the one that grasps more slowly. So you have time to better connect the details.
5. Packaging and manufacturer. Only select products from trusted brands. “Moment” is cheap, it is the most common. Although there are many other well-established manufacturers, which are listed above.
6. How much are liquid nails. No less important factor and cost. Choose the options that you can afford, follow the possible promotions and discounts in stores selling building materials.