How to open a doorphone metak without a key

The content of the article

• Ways to open a doorphone without a key
• How to Hack Intercom Metacom
• How to find out universal code
• Video tutorial: how to open a combination lock

Each code system can be unlocked by simply entering the desired set of numbers. Home locks are no exception. How to open a Metacom intercom without a key? Just like the other, dial a special password. The codes specified in this article work if the installer (or any of the residents) did not change the system settings of the code lock or universal password.

Ways to open a doorphone without a key

Any combination lock requires the ability to open a door without a key. Each of the methods presented here is suitable for individual common Metacoma models, so if after the first attempt it was not possible to open the door, proceed to the next method. Try all of the above methods – one of them will definitely work. Note: in all combinations “B” means the call button, regardless of whether it is indicated on the panel by a letter or a handset icon. Here are some effective ways to tell you how to open Metakom’s models without a key:

1. Using the apartment code. These code lock models are assigned a password for each apartment number in this house. If you know the code code of your apartment, dial it and press the call button.
2. Using universal code. If the installer or other residents of the house did not change it, then the standard combination “1234-B” should be.
3. Press the call button and dial the number of the first apartment in the entrance. (To identify it, just look for the floor plate.) If you did everything correctly, COD should appear on the display. Dial 5702 and after a couple of seconds the door will open.
4. Dial 65535-B. Enter the universal code and press B-8.
5. Enter the universal code and the combination B-6-B-4568.

The methods listed above are suitable for combination locks with a screen. If you want to figure out how to open the Metacom intercom without a display, use one of these methods:

• enter this code: B-27-B-5702, wait a couple of seconds, and the door will open;
• press B and dial the combination 1-B-4526.

How to Hack Intercom Metacom

There are special codes that allow you to not only get inside the building without a key, open the door, but also edit the setting of the device itself. For example, you can change the passwords used by the system, delete or bind keys to a specific apartment, change the main cipher of an entrance, enter the programming mode, and learn how to open the intercom in the user menu. For any action you need to know the so-called “master code”. By default, the password 1234 is assigned to Metakom..

1. Door opening. How to open Metak without a key? Find out and enter the universal code, press the call button.
2. Work with keys. You can remove or attach pills to a specific apartment. To do this, enter 65535-B-master-code-B-B. Then indicate the number. To record the key, enter B-7. If you want to untie all attached chips from the apartment, press B-7-0-111.
3. Change system passwords. Using the menu, the installer can change the universal code of the intercom. To assign a new master password, enter 65535-B-master-code-B-9-3-new password-B. In the same menu it is possible to change the apartment code. To do this, you need to know the already installed cipher. It is assumed that you must be the owner of the apartment to replace passwords. Dial the combination 65535B-master-code-B-B-apartment number-B-0-new password-B.
4. Menu entry codes. Metacom is equipped with three different directories. To enter the standard user menu, enter the combination 65535-B-1234-B-B. Password from the doorphone service: 65535-B-master-code-B. To change the system settings, enter 65535-B- master code -B-9.

How to find out universal code

“Metacom” assigns its own password for each apartment in the house – it is a set of four digits. The owners must know him in order to get into the house even without a key or in another emergency. The password is specified in the agreement with the installer. There are universal codes for intercoms that are not tied to the apartment. By default, the main password from the protective device is 1234. If someone has already changed it before you, you can only find out the new password from the service company.

Without knowing the universal drive code, you cannot:

• change it and set a new master password;
• attach or detach key chips from the apartment;
• change the system settings of the device;
• Assign a new code for the apartment;
• perform code lock programming.

Without a master code, you can:

• open the Metacom intercom without a key;
• enter the user menu.

Video tutorial: how to open a combination lock

This short video tutorial provides a simple and straightforward explanation of how to open a door without a key. In the video, the author unlocks the Metacom model with a display. To use this method, you need to know the number of the first apartment in the entrance. It is very simple to find out – on each porch there is a sign with the apartment numbers belonging to this part of the building. The photo preview shows which model of the intercom is used. If you have the same combination lock, then the password from the video should be suitable for opening the door without a key.