How to sew knitwear on a regular sewing machine

The content of the article

• What should be the foot for knitwear
• How to sew a double needle on a sewing machine
• How to process the neck of a knitwear
• Sewing machine seam
• How to choose threads for knitwear
• How to choose knitting needles

Knitwear looks beautiful, comfortable to wear, and stores today offer a huge selection of fabrics. Novice craftswomen are afraid to sew things from this material, they doubt that it is difficult to carry out such work without special equipment and preparation. Knowing the intricacies of the process, you can make any product on a regular sewing machine.

What should be the foot for knitwear

If you sew a dress from a knitted fabric using an ordinary foot, you may encounter several problems. Stitches will be skipped, matter will begin to gather, and threads will break. How to sew knitwear on a regular sewing machine? You can adapt:

• put paper strips under the fabric and on top so that wrinkles do not form;
• select sewing modes by adjusting the thread and foot tension;
• use special water soluble paper.

Even if you have no permanent plans for sewing knitwear in your ideas, get a special foot. Using such a device is convenient and simple. How to sew knitwear on a regular sewing machine with such a foot? The design has a special lever, which during installation rests on the needle holder. A rubber cushion is fixed at the bottom of the base, and a spring is installed at the back.

Thanks to this design of the foot, the layers of matter do not shift, their stretching and pulling is prevented. The work is carried out as follows:

• the needle begins to rise with the lever;
• simultaneously with this comes a plate with an elastic band;
• the material is stretched by the step size;
• the needle drops, the spring presses the rubber pad of the foot to the canvas;
• the fabric does not slip, does not form folds, does not fall into the lower lattice, but stretches quietly.

How to sew a double needle on a sewing machine

If you have a question how to sew a knitted dress, try to make it a double needle on the most ordinary sewing machine. The processing of the bottom of the products is best done with an overlock or a flashing device, but not all of them have it. The double needle makes seams similar to industrial sewing. They differ in elasticity, because two straight parallel lines go above and a zigzag below.

The design has a common holder and fastened needles. Features of work:

• It is necessary to have 2 coils, each of which is unwound in its own direction.
• If there is no second holder, you can take the shuttle bobbin and install it next to the main reel.
• Threads are threaded together – until the moment when they need to be threaded into each needle individually.

How to process the neck of a knitwear

At the initial stage of mastering the art of sewing from such a fabric, the question often arises of how to process the neck of a knitted dress. To figure out how to handle the neck of a jersey t-shirt, remember these points:

• Take a strip of the same quality material 3 cm wide.
• Zigzag the edges.
• Sew the main fabric to the neck on the right side, slightly pulling the material, sew.
• Fold the edge to the left side so that the edging remains visible from the front, and the line is closed, notice.
• Sew on the front side.

Sewing machine seam

How to flash knitwear on a regular sewing machine? In this process, several types of seams are used, each of which is prepared to solve its problem. Let’s consider in more detail how to hem a knitted T-shirt on a typewriter. You need:

• process the bottom with a zigzag seam;
• gently cut off excess material before the start of the overcast seam;
• bend the edge by a centimeter, sweep or fasten with pins;
• sew the stitch with a double needle on the front side.

If you want to stitch two fabrics, use the straight stitch. It is suitable if matter does not stretch very much. It is better to use a special foot for sewing. Set the pitch to 1.5-2 millimeters. How to sew knitwear on a regular sewing machine so that when the material is tensioned, the threads do not break? Use a narrow zigzag, half a millimeter wide. If it is stitched 1.5 cm from the edge, the stitch will be durable and elastic.

When using non-crumbling material, special edge treatment is not required; double stitching with one needle can be used. It is made straight or zigzag. This is done like this:

• Two parts of the product are swept away.
• Stapled along the bond line.
• Stepping back to the edge by 3 millimeters, the second line is sewn.
• On its border, excess matter is cut off.

How to sew an overcast seam on a regular sewing machine if there is no overlock? You need to try to make it a zigzag seam:

• If there is no special foot, place tracing paper strips on top and bottom of the material.
• Make a zigzag seam at a distance of 3 mm from the edge, later cut the fabric from the allowance side.

Since the knitted fabric is very stretched, it is advisable to make stabilizing seams on the shoulder line, on the trousers, in the place of the step seam:

• For this, a special tape is laid that does not stretch.
• It must be sewn in at the moment of grinding the product elements.

How to choose threads for knitwear

When sewing, the correct selection of thread plays an important role. Too thick can ruin the tissue at the puncture site, and thin can quickly tear. It is also important to use the thread corresponding to the needle number, otherwise skipping stitches may occur or a wavy stitch will result. In the marking of threads should be the letters LL or CL. For a conventional machine, the following combinations are recommended:

• For fine matter – needles No. 60 and No. 70, and threads – No. 50 and No. 60;
• For thick fabrics – needles No. 90, coils – No. 30 and No. 40.

How to choose knitting needles

To understand how to sew knitwear on the most ordinary sewing machine, it is important to deal with needles. They should match the thickness and type of fabric. The end of the needle should be rounded so that the threads of the material are pulled apart rather than punctured. The package must bear the marking:

• jersey – for wool and cotton;
• stretch – for synthetic material.

If the needle is selected correctly, it does not tear the fabric, does not form puffs. After flashing the product, you will not notice the arrow with the loops loosened. If you are going to sew on a regular sewing machine, choose the threads for the knitted fabric, depending on its thickness:

• thin fabric – No. 60;
• middle canvas – No. 70, 80;
• coarse cloth – No. 80.90.