How to remove a fungus in a bath

The content of the article

• How to get rid of a fungus in a bath
• Ventilation system processing
• How to remove a fungus in a bath on the walls
• What to do if a fungus appears on the floor in the bath
• How to process a bath from mold
• Mechanical surface cleaning
• Treatment of wood from fungus folk remedies
• Antiseptics for mold
• The price of funds for removing fungus in the bath

This problem is faced by the owners of the baths, who equipped the steam room, but the ventilation is insufficient. If you do not pay attention to the mold in the bathhouse, then it can penetrate deep into the walls, which will greatly complicate getting rid of it. Recipes and tips will be relevant for most people with their own steam room..

How to get rid of a fungus in a bath

A room in which the heating system does not work on an ongoing basis is an ideal environment for the formation of fungus. Particular importance should be given to wooden buildings, because they are in the main risk group. Mold can spread on any surface, the main condition for rapid development is maximum humidity. Colonies develop on the ceiling, floor, wall or in corners. If a certain zone is not sufficiently insulated, as is often the case in steam rooms built by yourself, then mold will appear there first.

If you notice the first signs of a fungus, you need to immediately begin to remove it. There are three main ways how to destroy mold spores: mechanical, folk remedies, store preparations. The conditions are as follows:

• The first option is to clean the damaged surface with a brush or grinder. If during the elimination of the fungus, damage to the entire beam was detected, then it must be completely replaced.
• Folk remedies for getting rid of the fungus or ready-made store mixtures involve treating infected areas with aggressive substances of superficial or deep penetration.

Ventilation system processing

Before proceeding with the disinfection of walls, ceiling, corners or floor from a fungus, it is necessary to check and process the ventilation system well. The first step is to open the valves and examine the cavity, which serves as a ventilation duct. They clean up any blockages, dirt, eliminate the acquired damage. Many owners of the baths eliminate the source of the appearance of the fungus by installing a fan near the ventilation grilles. The device promotes the necessary air movement.

The ventilation system can be treated with a specially designed primer. The tool should go solely to eliminate the fungus, and not for prevention. You should choose a drug that works with wood, clearly adhere to the dosage and precautions so as not to damage yourself, not burn your skin. After each treatment it is necessary to ventilate and dry the bath.

How to remove a fungus in a bath on the walls

Shops offer a wide range of facilities. How can I remove the fungus in the bath? Most people use the grandfather method using copper sulfate – it is considered the most effective. It is necessary to thoroughly dry the surface, make the solution according to the instructions and apply it on the walls with a brush. The procedure should be repeated after a couple of weeks. How to treat the walls of the fungus can still? Coat the surfaces with acetic acid 70% or whiteness in a pure (not diluted) form. This is a temporary solution to the problem: the ventilation system should be repaired first.

What to do if a fungus appears on the floor in the bath

Infection of the floor with a fungus in the bath is a common occurrence. It is advisable to disassemble the plank surface with mold, in the process, remove part of the soil, which can also be infected. Affected boards should be replaced. The rest of the floor of the room must be treated with an antiseptic. To avoid mold in the future, the bath must be heated daily, and after use – ventilated for a long time. In this way, you will get rid of the cause of mold and protect yourself from diseases that cause mold..

How to process a bath from mold

There are many tools that help kill mold. They can be either purchased at the store in the form of a ready-made solution, or made independently. It is better to buy antiseptics for superficial and deep use of well-known and trusted brands that guarantee protection of boards and a positive result in eliminating mold. This is for example:

• Biotol;
• Metas Bio;
• Ceresite;
• Dali
• Neomid Bio;
• Erlyn;
• Pentatos.

From folk remedies, how can I remove the fungus in the bath, choose:

• Chlorine lime, which consists of quicklime, lime and plain water. It is applied on a dry surface..
• Blue vitriol: it is sold everywhere in stores that specialize in gardening. If you make a solution per liter of water, then you need to take fifty grams of vitriol, one hundred grams of potassium alum and thirty grams of table salt.
• Sulfur, the price of which is low, and the result is fast and perfect. In a refractory container (a basin, a bucket), a sulfur block is set on fire, which during gas combustion releases gas, destroying fungal spores throughout the room.
• Hydrogen peroxide in 20-25% is applied to the wood and left for several hours, and then wiped with a cloth moistened with water.
• Regular whiteness, which can be bought at an affordable price in hardware stores. After applying this substance, the walls should be additionally treated with water..

Mechanical surface cleaning

If the depth of penetration of the fungus is not very significant, then you can use mechanical stripping of the affected area. For this, building tools and devices are useful: a spatula, emery, a metal brush, a grinding machine. After visible areas with mold are removed, it is advisable to burn the waste to prevent the development of fungus on other objects. Mechanical cleaning is also used for deep penetration of mold, sawing a piece of wood and inserting new material there.

Treatment of wood from fungus folk remedies

How to remove the fungus in the bath? The best remedies are folk remedies that have been tested by more than one generation. Chloric lime, copper sulphate, sulfur block, hydrogen peroxide and household whiteness do an excellent job with the fungus and are notable for their low price. When using these compounds, you should follow the cooking instructions, as well as wear a protective mask so that vapors of harmful substances do not enter the body. In the case of a sulfur checker, it is necessary to leave the room, and windows, doors and all cracks should be tightly closed.

Antiseptics for mold

In addition to mechanical disposal of the fungus or the use of folk remedies, it is recommended to purchase professional drugs. Store antiseptics of superficial and deep penetration, which are completely different in price, will cope perfectly with mold. How to remove the fungus in the bath for a long time? It is better to stop the choice on the products of trusted manufacturers, such as Biotol, Metas-Bio, Cerezit, Dali, Neomid-Bio, because the chemistry of little-known firms may not help, and the money will be spent.

The price of funds for removing fungus in the bath

Many owners decide what to process the fungus in the bath, starting from the price of the used product and method. Machining in the presence of all the tools will be the most budgetary. Impregnation with folk remedies is a little more expensive. The price of store antiseptics is mixed. It all depends on the fame of the manufacturer, but in most cases it is high. Options, how to destroy mold, mass – you should choose an acceptable one for you.

Find out how vapor barrier is applied to walls of a wooden house.