How to weave macramé

The content of the article

• Story
• Material
• Material requirements
• Macrame color selection
• Macrame weaving tools
• Weaving macrame knots
• Macrame Woven Clothing
• Macrame weaving – baubles, bracelets, knots, belt

Now we will tell you what macrame is, how to create wicker things and why you need it. The word macrame is of Arab origin, which means fringe, lace, braid, in simple terms it is nodular weaving.

Story

Over the centuries, people have created many types of needlework. Macrame belongs to one of them. Over time, they improved, and once turned into decorative, and then into artistic weaving. Nodular and knotless (pigtails), flat, figured – these types of weaving existed in Russia.

Material

For macrame, you can use a large amount of material. The most common are: leather strips, cords of various fabrics, plant fibers, sisal, fishing line, jute, twine, thin wire, cotton, silk, linen and wool threads.

Beautiful products can now be created from synthetic materials. Not so long ago needlewomen used natural tones in their work. Flax was considered very popular. There are not many natural colors, so a little later we started using thread dyeing.

Most lace is created in bright colors, but multi-colored, well-chosen combinations also delight the eyes. Before choosing the necessary colors and material, you need to decide on the theme. In order for the material not to deform, it must be washed and boiled for 10-15 minutes. Only in this case, your product will have its original shape and appearance.

Material requirements

The material should be strong, moderately twisted and pliable. If you want to get a clear relief pattern, then you need to twist the macrame weaving material tightly.

The threads can be extended because it is not always possible to cut the required length. You can do differently. You need to swap the long and short threads, but it is best to attach the ends to each other using knots. All excess can be easily cut. It’s very easy to join the nylon material, as it melts.

Macrame color selection

If weaving macrame is carried out with multi-colored threads, then the choice of colors should be treated with special attention. If you know, then color has a psychological effect on a person. Therefore, the colors for weaving should be combined. Each color has its own shade and nature of the impact on humans. Therefore, the impression received from the woven thing will depend on the selected colors.

Macrame weaving tools

Macrame weaving does not require special devices. For weaving, you will need scissors, a needle, a ruler, metal knitting needles, a hook, a spindle, clamps (for attaching a thread), pads. If you want to do the installation of products, then you will need glue.

Weaving macrame knots

The main one in macram is the Hercules knot. To tie it, you will need two threads of 10 cm.
They must be stacked vertically on the pillow, with the end of each pin secured with a pin. The right thread needs to be wound under the left, and the left one needs to be wound from the bottom up and into the loop. After that, the resulting knot must be tightened.

The first flat knot. To start, 2 threads must be fixed on the basis of an uneven mount. After you do this you should get 4 ends of the thread. Next you must distribute them. It is necessary to count from left to right.
To summarize. The horizontal thread is used for fastening. The second basis is the threads 2 and 3, necessary for tightening the nodes. This is necessary for everyone who is going to seriously engage in weaving macramé. And now we go directly to weaving a flat knot.

The right working thread must be taken with the right hand and put it on the base, as well as under the left working. After that, with your left hand, grasp the left working thread and wind it under the base and from below into the loop that turned out between the base and the right working one. This way you will weave your first flat knot.

Knowing how to weave it, you can try to make a left-side twisted chain. All actions must be continued on the sample on which you weaved earlier. Tie the first 3 flat knots. If you look at the sample, you will notice that the group of nodes turned slightly to the left. The pattern on which you weave macrame must be rotated 180 degrees to the left.

After this, it is necessary to weave another 4 first flat knots. When everything is ready, the sample must again be turned 180 degrees to the left. Repeat weaving 4 knots again. If you continue, then you will get a left-side twisted chain. I advise you to ensure that the basis is not visible. If you did everything right, then your sample will be beautiful. And remember that for the convenience of weaving macrame, the sample must be secured with a pin at each turn.

Now let’s try to learn how to weave the second flat knot. For weaving, it is necessary to strengthen the threads on the basis of 2. The right working thread must be taken with the right hand and put it under the base, as well as on the left working thread. After that, with your left hand, you need to take the left working thread and lay it on the base and insert it from above into the loop that turned out between the base and the right working thread. So you got a second flat knot.

This way you can weave a right-hand twisted chain. Work must be continued on the started sample. First tie 3 second flat knots. If you carefully look at the sample, you will notice that it turned slightly to the right. Your next step will be to rotate the sample 180 degrees to the right. Next, you need to weave 4 second flat knots. After this, the sample must again be rotated 180 degrees and repeat the above steps.

Square flat knot. For weaving, it is necessary to fix two threads on the base. Next, tie the first flat knot, and immediately below it – the second. Combining them with each other, you get a square flat knot. To know for sure that it is finished, you need to create a lock that can turn out on both the left and right sides. It all depends on which knot was tied first. Being able to weave a square flat knot, you can create patterns.

A chain of square knots. Using the uneven fastening method on the basis of the need to strengthen 2 threads. After this, it is necessary to tie the first flat knot, then the second flat knot. If everything is done correctly, then you have a square knot with a lock on the right. If you alternate flat knots, you get a chain of square knots.

Macrame Woven Clothing

A few examples of beautiful women’s clothing, this clothing is a real masterpiece. Needlework – weaving macramé is a rather complicated manual work, but the result is impressive. any woman will be jealous of seeing such an outfit on a rival.

Macrame weaving – baubles, bracelets, knots, belt

In these photos you will see many examples of macrame weaving. There are woven belts, and macrame baubles, a lot of bracelets. By the way, you can learn how to weave baubles by reading the article. Weaving baubles using the macrame technique is a different story, but if you know how to weave baubles and macramé, then you can combine this knowledge by making bracelets from beautiful knots.