Modern wooden euro windows: characteristics, advice on purchasing

In recent years, wooden euro-windows with built-in double-glazed windows have become quite popular. There are several reasons why wooden euro windows are so popular. First of all, wood is a material of natural origin, absolutely safe for human health. Unlike sealed plastic windows, wooden euro-windows are able to let air through themselves, forming the most favorable microclimate inside the apartment. It should also be said that wooden euro-windows have excellent insulating properties, reliably protect the interior from the penetration of cold, wind and moisture. Modern wooden euro-windows have a rather attractive appearance and are able to decorate the interior of any home. Plus, they’re pretty easy to clean..

If we talk about the lifespan of wooden euro-windows, they can work without problems for more than fifty years. The only condition is that approximately every five years it is necessary to renew the outer paint and varnish layer of the wooden surface of the window.

It should be noted that the manufacturing process of modern wooden euro-windows is rather complicated. It consists of many sequential steps. If one of them is missed or performed incorrectly, the manufacturing technology of high-quality wooden euro-windows will be violated. Since the manufacturers of wooden euro windows have set a fairly high level of quality standard, you need to take into account the slightest nuances in the production process.

The laws of the market are such that if demand significantly exceeds market supply, quality control may weaken. Sometimes there are incomprehensible one-day companies that produce products of unsuitable low quality. Therefore, the average consumer bears increased responsibility for the selection of a really high-quality wooden Euro-window. Before purchasing a product, it is advisable, at least in general terms, to try to determine the fundamental quality criteria and strictly follow them. First of all, you need to understand what a quality profile is..

When choosing a wooden profile, it is better to prefer glued laminated timber, rather than solid wood. As you know, under the influence of temperature and humidity changes, the tree begins to deform rapidly. A wooden structure made from a solid solid can be led quite quickly.

Be sure to ensure that the wooden window frames do not contain an inner core. Also, do not take a wooden structure with visible annual rings, large knots, roughness, masked resin pockets. Remember, these are the most vulnerable areas of any wood piece..

It is better not to take windows if incomprehensible carnations are nailed to their shutters, if there are artisanal glazing beads, a low-quality oily sealant is nailed. In addition, the sealant should not crawl out of the internal grooves of the wooden structure, there should not be poorly polished rustication (horizontally and vertically located joints of window sashes).

The market is in high demand for a window profile made of dense coniferous wood. Windows made from oak, ash, chestnut and larch wood are also valued..

An equally important link in the technological chain is the application of high-quality impregnation. It will not allow the wood to dry out quickly and will extend the maximum service life of the wooden structure.

The main element of any wooden window construction is a built-in glass unit. Its quality depends on such parameters as the ability to retain indoor heat and the amount of daylight entering the room. Today, the most stable demand is for double-glazed windows made in Germany and Finland. Fans of domestic products can try to look for local double-glazed windows, but their quality will have to be determined literally by hand. Nobody will give guarantees here.

The more built-in chambers a double-glazed unit has, the higher its insulating qualities. Today on sale you can find a double or triple glass unit design. Outside, all joints between the glass and the frame must be treated with a protective sealant, water-repellent gel or sheathed with metal plates. Certain types of glass units are capable of reflecting destructive ultraviolet rays.

The third key link of any wooden euro-window is high-quality fittings. The maximum duration of the entire window structure depends on its quality. You should not select window fittings solely on the basis of external features. First of all, pay your attention to the manufacturer. There are several leaders in the window hardware segment. One of them is Roto NT. Its products are valued primarily for their ability to withstand increased loads for many years..

Always remember – high-quality wooden euro windows, by definition, cannot be cheap. Such a window is initially more expensive than most plastic counterparts. Firms trying to sell cheap wooden windows are simply cheating you. The rather high cost of a wooden euro window is made up of many factors: expensive high-quality wood, the complexity of manufacturing technology, the cost of labor of professionals, the cost of transportation and a number of other factors.

It is better to buy a wooden euro window directly from the manufacturer. You should never contact resellers. Having sold a certain number of windows, they can disappear forever, forgetting about after-sales service or warranty obligations to customers. First of all, the presence of a solid production base, the availability of a ready-made package of certificates for all products speaks of the solidity of the company. Arriving at the office of the organization, you will always receive competent advice, get acquainted with the samples of manufactured products and meet an understanding attitude.

A well-made wooden window can last for many decades. The only prerequisite is regular maintenance and careful handling of the windows..