How to make ripped jeans – step by step photos and videos. DIY ripped jeans at home

The content of the article

• How to make the most ripped jeans at home
• Tools that will be needed during the work
• Scheme
• How to rip jeans beautifully with your own hands: performance techniques
• Cuts on old jeans step by step video
• How to scuff with a grater
• Bleached holes
• How to make shorts or breeches from ordinary jeans
• Photo of beautiful ripped jeans

At different times, things that look worn out become popular. Remember, there were periods of popularity of patches on clothes, holes, scuffs. Even eminent designers often create collections that look worn. This is not a strange thing, but a special country style that attracts many fashionistas. And if you decide to get such a product, then you must know how to make ripped jeans. After all, they are easy not only to buy, but also to make yourself.

How to make the most ripped jeans at home

If you have old or new jeans that you want to transform – this is great. This needlework will not take much time, but the future new thing will certainly be unique, non-standard. It is not so difficult to make ripped jeans at home, but there are many schemes, technologies. You don’t have to go to cutting and sewing courses, but you need to have patience, tools, imagination.

Tools that will be needed during the work

To transform unsightly jeans and make them frayed, holes must be prepared:

• jeans (it is allowed to take trousers from another material, but the technology for processing them is slightly different);
• scissors (preferably large, sharp for fabric);
• a small grater, razor, nail file or sandpaper (if scuffs are expected in addition to holes);
• stationery knife or blade (it is acceptable to replace this tool with ordinary manicure scissors, but you will have to be more careful when working with jeans);
• additional pieces of fabric, lace (if a beautiful feminine decor is supposed and sewing it under a large hole as an inner patch);
• chalk, pencil or pen (to indicate places for future holes in jeans);
• a needle or a ripper (will help to pull unwanted threads);
• tweezers or a vacuum cleaner (for quick removal of excess thread);
• small sewing needles or paper clips (for fixing patches on jeans).

Scheme

First, determine the places in which holes will be made, cuts. Analyze the denim of the trousers. If it is worn, then the holes should be small in those parts where bends are not assumed (above or below the knees, on the back pockets of each leg). If the material is new and does not crack at the seams, then the shape, placement, size of the holes can be any. In the first version, they will be made easy, and you can even pull the threads by hand, and in the second case, you will definitely need a fabric ripper.

To outline future places for holes, measure jeans and put in place the beginning of the bends, knees, the end of the buttocks. When you take off your pants, these marks will help you determine with accuracy where the holes and scuffs should be. Draw a full circle, not just a point. If the hole is irregular in shape, it is better to place it so that the largest diameter falls on the shared thread (it stretches less). Some types of crayons for sewing are not washed, so a small piece of soap will be the best solution..

How to rip jeans beautifully with your own hands: performance techniques

1. Sloppy holes in grunge style. They are very simple to execute. At a selected location, strips of different lengths are cut parallel to each other at a distance of 5 mm. Cross threads are pulled and removed. If some of the threads are damaged, this will add sophistication to the pants, but in no case will spoil them.
2. Minimalist ripped jeans. For such trousers, you will have to outline several places with small holes. The main task is not to damage the transverse threads, but to take out part of the lobar threads so that they are not very variegated. Such holes are often made in the size of 2 cm by 4 cm and place them closer to the side seams of jeans.
3. Shabby holes on trousers are used very often, especially when it comes to large diameters of holes. This effect is easily achieved using a simple kitchen grater, sandpaper or pumice for the feet. The main thing in this matter is not to touch the threads that remain transverse or shared, so that the jeans serve more than one month, a year, and the fringe does not tear after the first wash.

Cuts on old jeans step by step video

To properly make holes in the jeans and not be disappointed in the result, try the same steps on a small piece of similar fabric. For example, if you still have some kind of cropped jeans, it will come in handy for a test option. Try to make a hole with thread on it, different types of scuffs, styles. To consolidate knowledge, watch the following video clip:

How to scuff with a grater

Conventional kitchen utensils often come to the aid of needlework. To make the hole on the jeans look old and shabby, you need a simple grater or a piece of sandpaper. Tightly, along the edge of the hole, move the selected tool in small jerks so that the threads fluff. Do the same with each edge of the jeans hole. You can perform work both on the front side and on the wrong side. After that, bleach the threads with chlorinated solution..

Please note that the inside of jeans often looks more original than the front side. If there are additional pieces of such fabric, try making such a patch on the front of the trousers. You can sew the patch with large stitches so that the threads are visible. Such an addition would be quite appropriate for both men’s and women’s clothes. From pieces of another fabric, you can form a pattern (optional). Improve your jeans so that they can complement both a romantic, feminine look and a sporty, daring.

Bleached holes

To make the jeans look even more stylish, try to bleach some threads and places. This is most easily done using a chlorinated solution or other bleach. Ordinary chlorine and dissolve in a small amount of water, apply the solution to a small piece of cotton wool or gauze and process the necessary places with holes. Chlorine is eaten into the tissue, and whiteness may not appear immediately, but after a while. Therefore, immediately wash the jeans after processing, so the excess chemical product will be removed and the holes will remain in excellent shape for a long time.

When bleaching holes on jeans, it is important to carry out all the work with rubber gloves and outdoors. It is advisable to test bleaching on a small piece of the same fabric or on the invisible part of the trousers (under the knees, on the wrong side). If you want to decorate jeans with white drops, then using a pipette, apply a solution of chlorine to the fabric, and put a layer of cotton wool at the bottom. When chlorine is absorbed, it needs to interact with the tissue for about 1 hour, after which it will be necessary to completely wash the clothes.

How to make shorts or breeches from ordinary jeans

An easy way to update old jeans is to trim them to the height of shorts or breeches. In this case, you need to outline the height of the future product and tear along the transverse thread. If the shorts are expected without further processing, but with torn edges, then no allowances are required. They are necessary if, according to the model, a twist is necessary. For this design, add 3-7 cm to the desired length and trim the excess. This process will look like this in stages:

• We fold ready-made jeans on a flat surface without folds.
• Mark with chalk or pencil the place of trimming the extra length.
• Tear off with your hands or cut off a pair of jeans with scissors.
• In addition, we make holes or scuffs (optional), given that the color of the longitudinal thread will be lighter than the main shade of the trousers.
• Tuck the edge or leave it torn. Done!

Photo of beautiful ripped jeans