How to apply liquid wallpaper on the walls

The content of the article

• General Material Information
• How to glue liquid wallpaper on the wall
• How to apply
• Application technology
• Methods for applying liquid wallpaper
• To paint
• In the bathroom
• On drywall
• To the ceiling
• On plywood

The domestic market for repair materials is striking in its diversity. One of the most popular coatings is decorative plaster. The network provides a lot of conflicting information about this type of decoration. What it is? How does it differ from the usual trellis? What are the pros and cons of famous stucco? How to apply liquid wallpaper on the walls? About this in our brief review..

General Material Information

Finishing material is a subspecies of plaster with the addition of cellulose fibers and silk. To give the material an aesthetic appearance, pigments, fillers (granules, spangles) are added to the composition. For fixing, use ordinary CMC glue, which is used for gluing with roll wallpaper. These are all similarities with standard materials. According to the application technology, the substance is closer to the plaster or putty.

The advantages of this type of finish:

• health safety;
• excellent heat and sound insulation;
• applied to any plane (arches, columns, curly panels);
• lack of seams;
• silky surface;
• do not fade.

If you accidentally stain or spoil any area with wallpaper, you just wash them with water. It will be necessary to cut a piece and seal the hole with a fresh solution. Among the minuses of such material, I would like to note the high price, the lack of a variety of colors and shades. Although due to the unusual texture they achieve original patterns on the walls.

How to glue liquid wallpaper on the wall

How to apply liquid wallpaper at home? An experienced builder and an ordinary housewife will cope with the process without any problems – no special knowledge or skills are needed. If you have putty putty on the wall at least once with a spatula, then with this material you will have no difficulties. Nothing can be spoiled, as you can remove and reposition. You will save nerves and money.

How to apply

What to use a tool for applying liquid wallpaper? The procedure is carried out with a spatula or roller. How to apply liquid wallpaper on the walls? Developed special tools – graters. They have a narrow canvas and they are made of transparent, sturdy plastic. This tool is convenient to control the process of smoothing wet fibers. A little creativity and you will create an original textured drawing.

Application technology

With strong pressure, the material is flattened and loses its shape. If not pressed, the layer will be very thick and increase consumption. One package is enough for an average of 3 m? flat surface. Coating thickness – up to 3 mm. The drying period of the surfaces is two days. The liquid from the solution will evaporate, so the material requires a well-ventilated area. Technique for applying liquid wallpaper:

• we recruit the composition with an instrument, with our hands;
• put a portion of the mixture on a spatula, wall and grind;
• level the surface with a grater.

Methods for applying liquid wallpaper

How to stick liquid wallpaper? Apply material from anywhere – they lie flat. Even if you have moved to a new house, you do not need to wait for the building to shrink – the plasticity of the wallpaper will not allow cracks to appear on the surface. Before applying, remove the remnants of old paper, putty, glue or paint. Pull metal objects out of the wall so that there is no staining, stains and stains.

To paint

How to apply liquid wallpaper on the wall? Without preliminary preparation for whitewashing and paint is impossible. It is better to protect with a plaster mixture. After drying, it is worth treating the surface with a quartz primer. Do not be afraid of cracks or minor dents – a popular finishing material will hide these flaws. Try so that the color of the walls is not bright, otherwise it will appear through the popular plaster.

In the bathroom

How to apply liquid wallpaper in rooms with constant moisture? Remember: the material is not moisture resistant, so it must be coated with a special repellent varnish. Choose products from one manufacturer. Two layers of protective substance will not allow water to be absorbed. If there are leaks from plumbing and pipes, then paint them with oil paint. Otherwise rusty stains will appear.

On drywall

A convenient, popular material is used to align the walls. However, joints and attachment points are visible. Coat the screws with oil paint, so you need to putty the entire surface. Then the walls are primed and painted with a water-based emulsion. Our goal is to fix the putty, because it is not a water-repellent material. After drying, we can apply plaster.

To the ceiling

From the ceiling we remove the remains of whitewash, paper, glue. It is better to remove the lighting devices, and turn off the electricity during operation. Level the surface with putty, primer. The application process is carried out using a grater in a circular motion – then you will get an unusual chaotic pattern. To check the quality of work, highlight the side with wallpaper with a flashlight on the side – all the bumps will be visible.

On plywood

First of all, check if the wooden surface is well fixed, whether there are deformations on it. Do not take sheets that are too thin – they bend when exposed to moisture. Before applying the popular plaster, the plywood is primed (2 or 3 layers), and then painted with water-based emulsion or oil paint. When everything is dry, you can start working with the original plaster..

Do-it-yourself wall decoration is done throughout the day. There is no need to evict relatives from the apartment – with the proper organization of labor there will be no debris and dirt that are inherent in standard repairs. How to do this for a beginner? We offer a master class in applying liquid wallpaper. In a short video, a professional will teach you how to quickly and beautifully ennoble your home.