How to wash the primer from linoleum – a review of effective chemical and folk remedies

The content of the article



Stains on the flooring are easy to remove, removing them immediately after the appearance. If the moment is missed, then water cannot get rid of such pollution. Choosing how to wash the primer from linoleum, if it has managed to dry, pay attention to chemicals, proven folk recipes and some household tools.

How to wipe off the primer from linoleum

The first and most reliable way is to wash off the dirt immediately after it hits the surface. This is done with a simple rag dipped in warm water..

If an hour or more has passed from the moment of contamination, the task becomes more complicated: the primer dries and polymerizes during this time, becoming insoluble.

Then you have to resort to more serious methods:

  • Mechanical impact. A simple option, but there is a risk of damage to linoleum.
  • Chemistry. Cleaning products are reliable and effective. Two cons: they are not free and toxic to humans.
  • Folk remedies. An affordable and safe alternative, although its effectiveness is not guaranteed.

Mechanical methods

If you decide to clean the dried primer by mechanical action, be extremely careful. The simplest method is this:

  1. A cloth moistened with warm water is placed on the dirty site..
  2. Hold it so for 2-3 hours so that the stain gets wet.
  3. Next, gently rub it with a fine-grained abrasive sponge.
  4. The remnants of the primer are cleaned with a damp cloth..
  5. Wipe the floor dry.

It is important to use warm water, but not hot: boiling water leads to bloating and cracking of the coating. If the main method did not work, then the following options remain:

  • Knife blade, spatula or scraper. The dried layer is pre-wetted with water or a solvent (acetone, gasoline or turpentine). This will facilitate the cleaning process and protect the surface from excessive friction. Then the primer is scraped off with a blade at an angle of 30-45 degrees. The movements should be light and accurate so as not to scratch the coating..
  • Steam cleaner. Primer stains on linoleum are also wetted with water or treated with a solvent. Next, a stream of steam from the device is sent to dirty places, while brushing them with a brush with a hard pile.

Woman washes the floor

Chemicals

Linoleum is forbidden to clean with preparations that include alkali, acid or soda. Means based on them are effective because these components penetrate deep into the material. But for linoleum, such an effect is a guaranteed damage to the appearance. Moreover, the structure of the material also collapses, due to which it becomes brittle, brittle.

A suitable formulation should be tested in advance before use. This is done on an area invisible to the eyes, and even better – on an unused piece of coating. Cleaning is carried out in a respirator and with the windows open (for the influx of clean air). Protective gloves on hands – a prerequisite to protect the skin from chemicals.

Title

Mode of application

Advantages and disadvantages

White Spirit Solvent

  1. Wet cotton swab / gauze swab with solvent.
  2. Wipe stains thoroughly until thoroughly cleaned..
  • Strong solvent that removes a lot of dirt.
  • Toxic.

Solvent “646”

  • Easy to use.
  • Efficiency.
  • Cheapness.
  • Toxic
  • Flammable.

TaffStuss cleaner.

  1. Pour fluid onto the primer stain.
  2. Leave on for 2-3 minutes.
  3. Wipe the damp stain with a soft sponge.
  4. Wash linoleum with a damp cloth.
  • Less toxic.
  • Less effective at cleaning old spots.

White spirit solvent

Folk remedies

These methods are known for their low cost and safety for humans. Folk remedies will help wash linoleum after repair, while maintaining its pristine appearance:

Title

Mode of application

Advantages and disadvantages

A solution of water and acetone

  1. The mixture is prepared in a ratio of 1: 3 (1 part – acetone, 2 parts – water). 100 ml of solution is 33.5 ml of acetone and 66.5 ml of water.
  2. The finished fluid is applied to a piece of hard cloth.
  3. Wiping them stains.
  4. Wash the floor with a damp cloth.
  • Simplicity.
  • Cheapness.
  • Large expenditures of time and effort if a considerable area of ​​linoleum is contaminated

Nail polish remover

  1. A cotton / gauze swab is wetted with liquid.
  2. They rub stains on the floor.
  3. Wash linoleum with a damp cloth.
  • Simplicity.
  • Cheapness.
  • Available for any lady.
  • Suitable only for small pollution. Otherwise, it is fraught with large expenditures of time and effort..

Water and milk

  1. Both components are mixed with each other in equal proportions (1: 1).
  2. The resulting mixture is applied to a swab or tissue..
  3. Wipe the contaminated area.
  4. Wait until the coating dries.
  5. The treated surface is rubbed with a woolen cloth.
  • Availability.
  • Adds shine to linoleum.
  • More effective as polish than a primer cleaner.

Nail polish remover

Rate article
Tips on any topic from experts
Add comment

By clicking the "Submit comment" button, I consent to the processing of personal data and accept privacy policy