Catalytic cleaning of the oven – what is it. How does catalytic oven cleaning work?

The content of the article

• What does catalytic oven cleaning mean?
• Catalytic self-cleaning
• Pyrolytic and catalytic cleaning of the oven – which is better
• Catalytic cleaning of the oven – reviews

A lot of delicious food recipes are designed for cooking in the oven. The main problem after this is the dirt that settles inside the appliance (fats, smells, etc.). When choosing the right model, you should know what the catalytic cleaning of the oven or pyrolytic is. Each device model uses one of the methods.

What does catalytic oven cleaning mean?

Each Bosch kiln model has one method for cleaning the wall surface. Some housewives do not even know what the catalytic cleaning of the oven means, although they use it during each cooking. It should be understood that after each switching on and cooking, the residues of vapors settle on the walls, after a while the equipment inside will look very dirty.

The catalytic purification system is a function of the accelerated chemical reaction of the decomposition of hydrocarbons (fats) into carbon, organic residues, and water. This happens under the influence of special oxidizing agents (fat-absorbing substances), which are located on the surface of the porous walls of the slab. The coating consists of:

• absorbent with nano particles;
• non-porous, porous substrate;
• substances that accelerate the oxidation process: copper oxide, cerium dioxide, cobalt, manganese.

The catalytic cleaning of the oven takes place completely without your participation. During the cooking process, the temperature reaches the level at which cleansing agents are activated. In Bosch models, as a rule, grease-absorbing enamel is applied to the walls, back surface and upper panel (sometimes on the fan blades). This technology is used in electric ovens and gas combustion.

Catalytic self-cleaning

The basis of the principle of operation of this technology is the decomposition of fat accumulated after cooking into soot, water, which will then be absorbed by sorbent particles. Self-cleaning the bosch oven occurs as soon as you turn on the oven and set the temperature to at least 140 degrees. The maximum efficiency of the technology is achieved at 200 degrees. You do not need to additionally enable, activate or do anything. The process is fully automatic.

Pyrolytic and catalytic cleaning of the oven – which is better

At this stage, manufacturers offer two technology options for keeping the inside of the oven in order. For this reason, people do not know pyrolysis or catalytic purification better. Each of the methods has pros and cons that can affect the choice. For example, pyrolytic technology is considered tough, but also more effective. All contaminants are completely burned to soot at a temperature of 500 degrees.

This mode is not typical for the cooking process, so it sets it on its own, nothing should stand inside the oven. The panel has a special self-cleaning program, which will need to be activated according to the instructions. According to customer reviews, inside such models of equipment look more presentable, but during self-cleaning they get very hot, so there should be no animals or children in the room. Nearby furniture can also negatively react to such changes. In addition, then it will be necessary to wash the inner walls with a rag to clean them from soot.

Catalytic cleaning of the oven – what is it described above and now you should understand what advantages and disadvantages this technique has. Based on the disadvantages and advantages, one can choose in favor of one of the methods of purification. The following aspects of this method can be distinguished:

Positive

1. No need to spend extra time, electricity, because cleaning takes place during cooking.
2. Automatic activation of cleaning processes under the influence of temperature.
3. The quality of all manufacturers is practically the same, which eliminates the impact on the cost of the device.
4. It can be used in gas, electric models with the same efficiency.
5. Cheaper than other types of oven cleaning.

Negative:

1. Less effective than other purification technologies.
2. Hand wash the door surface, the bottom will still have to, because the grease absorbing enamel does not cover these parts of the device.
3. The internal parts (guides, baking sheet, grill) must be cleaned separately independently.
4. If a sweet, dairy product gets on the coating, then the properties of the enamel will be lost.
5. Does not always dissolve all fat residues at a time.
6. Over time, the plates will need to be replaced or turned over (if they are double-sided).

Catalytic cleaning of the oven – reviews